Bradas

PE ball valve with two compression connections, 20–40 mm – Bradas

34,00 kr

Tax included Shipping calculated at checkout.

Size

20 mm 25 mm 32 mm 40 mm

Shipped from Germany · 30-day right of withdrawal

The Bradas PE ball valve is fitted directly between two PE irrigation distribution pipes. Both sides have a compression connection with a union nut; the lever opens or closes the water flow with a quarter turn. Direc...

Description

Direct installation in the line

The ball valve is designed for a continuous PE line without a thread or additional adapter. It is suitable for shutting off individual irrigation zones, maintenance work and seasonal shutdown.

Installation and operation

Insert the pipes into the two compression connections and tighten the union nuts by hand. The full passage reduces pressure loss when the valve is open. A valve box is recommended for operation when installed underground.

Preparing the pipe end and checking the connection

Choose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.

Technical specifications

Manufacturer: Bradas
Type: Ball valve with PE connections on both sides
Pipes: 20–40 mm
Variants: 20, 25, 32 and 40 mm
Housing: Plastic, corrosion-free
Ball valve: Plastic with full passage
Operating lever: Ergonomic, 90° turn
Connections: 2 PE compression fittings with union nuts
Seals: Integrated O-rings on both sides
Installation: Tool-free
Use: Zone separation, irrigation distribution systems, winterisation, garden irrigation and agriculture

Frequently asked questions

What is this ball valve used for?

It shuts off individual lines or irrigation zones, for example for maintenance, winterisation or separate control.

Which pipe diameters fit?

The ball valve is available for PE pipes with 20, 25, 32 or 40 mm outside diameter.

Do I need tools for installation?

No. Insert the pipes and tighten the union nuts by hand.

Can the ball valve be installed underground?

Yes. The plastic is corrosion-free. A valve box makes it easier to access the operating lever.

Does the water pressure remain the same downstream of the ball valve?

Even an open ball valve creates flow resistance. The full passage limits the additional restriction; actual pressure loss depends on the flow rate and the complete installation.

Does shutting off the valve automatically winterise the line?

No. Water can remain in a shut-off line. Before frost, drain the system using its intended procedure, including the ball valve and lower sections.

Technical specifications

Connection type	Clamp connection
Connection details	PE pipe connections on both ends
Connection system	Pipe clamping
Colour group	Black, Grey
Brand	Bradas
Material	Polyolefins
Operating medium	Water
Product type	Tap and regulator
Water flow control	Manual shut-off