Verto garden hose ECONOMIC 3/4 inch, 20, 30 or 50 m
Garden hose
Regular priceFrom 196,00 kr *Unit priceGarden hose CARAT sold by the metre, 1/2, 3/4 or 1 inch – Bradas
Garden hose
Regular priceFrom 40,00 kr *Unit priceGarden hose 3/4 inch, 5-layer, 25 or 50 m – Bradas Reflex
Garden hose
Regular priceFrom 510,00 kr *Unit priceNTS 3/4-inch garden hose, 19 mm, 5-layer, 24 bar burst pressure
Garden hose
Regular priceFrom 700,00 kr *Unit priceGarden hose SPRINT 3/4 inch, 25, 30 or 50 m – Bradas
Garden hose
Regular priceFrom 0,00 kr *Unit priceGarden hose WHITE LINE 3/4 inch, 19 mm, 5-layer – Bradas
Garden hose
Regular priceFrom 431,00 kr *Unit priceGarden hose CARAT 3/4 inch with cross braid – Bradas
Garden hose
Regular priceFrom 275,00 kr *Unit price
Choosing 3/4 inch for the task
With the same material, length and water flow, a larger internal diameter generally causes less friction loss than a smaller one. However, this does not provide a blanket performance guarantee for any particular hose. What matters is the dynamic pressure while water is flowing, the route, changes in elevation and every restriction. Plan a 3/4 inch setup by working backwards from the result you need: how much water does the end device require according to its instructions, how much does the source supply during operation, and how long will the hose run be?
| Situation | Key check | Possible action |
|---|---|---|
| Longer route | Measure flow at the far end | Shorten or reroute the hose, or reassess the diameter |
| Sprinkler or multiple branches | Check the demand and permitted operating range of all end devices running simultaneously | Run zones in sequence instead of opening everything at once |
| Existing tap | Record the thread and actual delivery rate | Choose a suitable tap connector; avoid unnecessary restrictions |
| Mobile use | Check the weight, bend radius and storage requirements of the particular model | Keep the planned length short, with enough slack |
How to compare connections
The 3/4 inch specification here refers to the hose size. A tap thread measured in inches describes a different component and must not automatically be treated as equivalent. For each component, record the system, connection type, male or female thread and size. For a hose tail, the approved internal hose diameter must match; for a quick coupling, the coupling system must also match.
Check before ordering
- Measure the route, including corners, slopes and slack for movement
- Measure flow at the water source using a bucket and stopwatch
- Use the end device's instructions to establish its water demand
- Mark all transitions and shut-off points on a sketch
- Check winding and storage options against the approved dimensions of the particular model
Find other diameters under Garden hoses. For storage, explore Hose trolleys and hose reels; for more on connections, read the guide to Garden hose diameters and connections.