Bradas

PVC lay-flat hose AGRO-FLAT 3 inch, 50 m – Bradas

Name: PVC lay-flat hose AGRO-FLAT 3 inch, 50 m – Bradas
Brand: Bradas
SKU: 780
Price: 58.49 EUR
Availability: InStock

€58,49

Tax included Shipping calculated at checkout.

Shipped from Germany · 30-day right of withdrawal

The 3 inch Bradas AGRO-FLAT layflat hose is a 50 m pressure line for water pumps. It conveys clean and dirty water through an internal diameter of approximately 75 mm. The blue PVC version with polyester reinforcement...

Description

Use on the pump pressure side

Connect the pump hose to the pump outlet. The hose tail, hose clips and any adapters must match the hose and pump. The operating pressure of the complete connection must not exceed the lowest permitted limit of any component.

Store flat

The PVC coating is abrasion- and UV-resistant. Nevertheless, protect the hose from sharp-edged surfaces and vehicles driving over it. Drain it after conveying, roll it up flat and clean it before storage; avoid tight kinks when laying it out.

Plan water transfer appropriately

The internal diameter is approximately 75 mm. With a 50 m line, height differences, bends and connections affect pressure loss; a larger cross-section therefore does not guarantee a specific flow rate.

Technical specifications

Manufacturer: Bradas
Range: AGRO-FLAT
Material: PVC with polyester reinforcement
Internal diameter: 3 inch, approximately 75 mm
Length: 50 m
Operating pressure: 2 bar
Colour: Blue
Design: Layflat hose, rollable
Medium: Clean and dirty water
Model: WAF2B300050
Coating: Soft PVC, abrasion- and UV-resistant

Frequently asked questions

Is the AGRO-FLAT a suction hose?

No. It is intended as a pressure hose for the pump outlet. For the suction side, you need a dimensionally stable suction hose with a suitable connection.

Which pump is compatible?

The important factors are 3 inch hose size, connection type and permissible operating pressure. Check the pump outlet and use a suitable adapter for different sizes.

What flow rate does the hose achieve?

There is no general litres-per-minute figure. The pump, height difference, line length, connections and pressure loss determine the actual flow.

Can I connect the hose directly to a tap?

Only if the connection and pressure suit the hose line. The pressure must not exceed 2 bar. A pump or water supply with higher pressure requires suitable pressure limitation; a suitable connector alone is not sufficient.

Technical specifications

Hose construction	Flat
Colour group	Blue
Inner diameter	75 mm
Length	50000 mm
Brand	Bradas
Material	Polyvinyl chloride
Operating medium	Water, Dirty water
Pack unit	Roll
Product type	Layflat hose