Bradas

PE ball valve with female thread, 20–32 mm – Bradas

27,00 kr

Tax included Shipping calculated at checkout.

Size

20mm x 1/2" 25mm x 3/4" 32mm x 1"

Shipped from Germany · 30-day right of withdrawal

The Bradas PE ball valve connects a PE irrigation distribution pipe to a component with a male thread, such as a tap, adapter, distributor or pump connection. The 90° lever provides quick opening and closing. PE comp...

Description

PE compression connection

Insert the PE pipe into the compression connection and secure it with the union nut and O-ring. Depending on the version, it fits PE pipes with 20, 25 or 32 mm outside diameter.

Female thread and ball valve

The female thread receives a male thread and is available in 1/2, 3/4 or 1 inch. When open, the ball valve provides a full passage and is intended for open/closed operation.

Selection and frost protection

If the connection point has a visible male thread, a female-thread connection is required. Drain standing water before frost.

Preparing the pipe end and checking the connection

Choose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.

Technical specifications

Manufacturer: Bradas
Type: Ball valve with female thread
Female thread: 1/2, 3/4 or 1 inch
PE pipe sizes: 20, 25 or 32 mm
Operation: 90° lever, quarter turn
PE side: Compression fitting with union nut and O-ring
Housing: Plastic, corrosion-free
Ball valve: Plastic, full passage
Use: Garden irrigation, tap connection, distributor systems, irrigation distribution systems and agriculture

Frequently asked questions

Which PE pipes fit the push-in side?

Depending on the version, it fits PE irrigation distribution pipes with 20, 25 or 32 mm outside diameter.

What does the female thread connect to?

The female thread is intended for male threads on taps, adapters, distributors or pump connections.

How is the ball valve operated?

Open or close the water flow with the 90° lever and a quarter turn. The ball valve is primarily intended for open/closed operation.

Do I need sealant on the thread?

The PE side is sealed by its own seal. For the threaded side, sealing depends on the mating connection. Use only a sealing method suitable and intended for the plastic connection; do not apply hemp or thread tape automatically in addition.

What should I do before winter?

Drain standing water before frost to prevent frost damage.

Which connection measurements are important when choosing?

On the PE side, the pipe outside diameter matters. On the threaded side, the thread size and connection type must match the mating part. Nominal inch sizes do not directly correspond to a thread diameter measured in millimetres.

Technical specifications

Connection type	Push-fit connection, Female thread
Connection details	PE pipe connection and female thread
Connection system	Pipe clamping, Thread
Colour group	Black, Grey
Brand	Bradas
Material	Polyolefins
Operating medium	Water
Product type	Tap and regulator
Water flow control	Manual shut-off