Bradas

PE pipe connector with female thread – Bradas

27,00 kr

Tax included Shipping calculated at checkout.

Shipped from Germany · 30-day right of withdrawal

The Bradas PE pipe connector provides a transition from a pipe run to a threaded connection. Its female-threaded side fits a matching male-threaded component. The PE side secures the pipe with a compression ring and u...

Description

Thread and mating component

The female thread must match the nominal size and thread type of the mating male thread. Suitable components include compatible fittings, filters or distributors. The inch designation is a nominal thread size, not a directly convertible pipe outside diameter.

Pipe connection

The pipe side is designed for PE service pipes with 20, 25, 32, 40 or 50 mm outside diameter. The compression ring and union nut are separate components; the O-ring helps seal the pipe side.

Installation and use

Cut the pipe cleanly to length, prepare the edge according to the installation instructions and insert it to the required depth. Tighten the union nut according to the manufacturer’s instructions. The UV-resistant, corrosion-resistant plastic fitting is intended for underground installation. Check the connection before backfilling and protect the system from remaining freezing water.

Technical specifications

Manufacturer: Bradas
Suitable pipes: PE irrigation pipes
Pipe diameter: 20, 25, 32, 40 or 50 mm outside diameter
Thread side: Female thread, 1/2" to 2" nominal size
Mating component: Matching male thread
Variants: 14 variants
Pipe connection: Compression connection
Union nut: Secures the compression connection
Compression ring: Secures the PE pipe
Seal: O-ring on the pipe side
Material: UV-resistant plastic
Applications: Irrigation systems, pump connections, and gardening and landscaping

Frequently asked questions

Will the connector fit a male-threaded connection?

Yes, provided the nominal thread size and thread type match. This connector’s female thread forms the mating connection. The PE compression size must also match the pipe outside diameter.

Is the pipe size the inside or outside measurement?

For this PE compression connector, the pipe outside diameter applies. The available selection includes 20, 25, 32, 40 and 50 mm; determine the thread’s inch size separately.

Does the O-ring also seal the connected thread?

The stated O-ring seals the PE pipe side. Thread sealing depends on the connection design. Use only seals or sealing compounds suitable for the plastic connection.

What should I check if the compression connection leaks?

First isolate and depressurise the line. Then check the pipe size, insertion depth, clean cut edge and seal condition. Replace damaged parts rather than compensating with uncontrolled overtightening.

Can a heavy pump component hang freely from the plastic connector?

Secure fittings and connected pipes so that they do not transfer avoidable bending or tensile forces to the plastic connection. Connect the thread without stress and according to the installation instructions.

Technical specifications

Connection type	Clamp connection, Female thread
Connection details	PE compression fitting and female thread
Connection system	Pipe clamping, Thread
Colour group	Grey, Black
Brand	Bradas
Material	Plastic
Operating medium	Water
Product type	Connector
Water flow control	No flow control