Bradas

PE equal tee, 20–32 mm – Bradas

27,00 kr

Tax included Shipping calculated at checkout.

Size

20 mm 25 mm 32 mm

Shipped from Germany · 30-day right of withdrawal

The Bradas tee divides a PE pipe line in two directions without changing the diameter at the branch. All three connections are the same size and intended for identically dimensioned lines. Equal pipe diameters The le...

Description

The Bradas tee divides a PE pipe line in two directions without changing the diameter at the branch. All three connections are the same size and intended for identically dimensioned lines.

Equal pipe diameters

The left passage, right passage and upper branch have the same diameter. The tee is available for 20, 25 or 32 mm variants; different connection sizes are not intended for this model.

Installation and sealing

Insert the PE pipes and tighten the union nuts by hand. Three integrated O-rings seal the connections. Adhesive, soldering or specialist tools are not required.

Material and use

The plastic body is UV-resistant and corrosion-free. The tee is intended for irrigation lines above or below ground. This does not imply general chemical resistance; check compatibility with the fitting and its seals when using additives.

Preparing the pipe end and checking the connection

Choose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.

Technical specifications

Manufacturer: Bradas
Type: Equal-diameter tee
Connections: 3 identical PE compression connections
Pipe sizes: 20, 25 or 32 mm
Installation: Tool-free with compression fittings and union nuts
Seals: 3 integrated O-rings
Main body: Plastic, symmetrical T-shape
Properties: UV-resistant, corrosion-free plastic
Use: Garden irrigation, lawn sprinkler systems, irrigation distribution systems, drip irrigation and agriculture

Frequently asked questions

How does this tee differ from a reducing version?

All three connections on this model have the same diameter. A reducing version has a smaller branch.

Can I mix different diameters?

No. This tee has three identical connections. Different diameters require a reducing tee.

Do I need tools for installation?

No. Insert the PE pipes and tighten the union nuts by hand.

Can the connector be installed underground?

Yes. The fitting is intended for burying in an irrigation line. Check the connections for leaks before backfilling and install without mechanical strain.

Do both branches receive the same amount of water?

Equal connection diameters do not guarantee identical water volumes. Line length, elevation and connected sprinklers or drippers affect distribution. Design the system accordingly and regulate separately if necessary.

Technical specifications

Connection type	Clamp connection
Connection details	T-piece; three equal-sized PE compression fittings
Connection system	Pipe clamping
Properties	UV-resistant
Colour group	Grey, Black
Brand	Bradas
Material	Plastic
Operating medium	Water
Product type	Connector
Water flow control	No flow control