Brass impulse sprinkler ½ inch male thread, 20–360° – Bradas
Shipped from Germany · 30-day right of withdrawal
The Bradas GKV5040SGZ brass impulse sprinkler waters an adjustable sector from 20 to 360 degrees. The water jet drives the impact arm and advances the sprinkler step by step. At 3.5 bar, the model reaches a watering d...
Description
Description
The Bradas GKV5040SGZ brass impulse sprinkler waters an adjustable sector from 20 to 360 degrees. The water jet drives the impact arm and advances the sprinkler step by step. At 3.5 bar, the model reaches a watering diameter of 25 m with a water requirement of 18.28 l/min. Connection is via a 1/2-inch male thread.
Set a sector or full circle
The adjustable watering angle allows irrigation of part of an area or a complete circle. Set the sector limit to the required area and check the movement while the sprinkler is running. Consider walls, paths and sensitive plants when positioning it.
Impact drive and brass housing
A spring-loaded impact arm engages with the water jet and drives the rotary movement. The brass housing is designed for garden irrigation. Leave enough space around the moving head so plants or other obstacles do not block the mechanism.
Connection and secure positioning
The ½-inch male thread fits a suitable female ½-inch connection, for example on a tripod, ground spike or permanently installed supply line. The mounting must support the sprinkler securely. A tripod or ground spike is not included.
Water requirement and range
For a 25 m watering diameter, the sprinkler requires a water supply of 18.28 l/min at 3.5 bar. Pressure at the running sprinkler is decisive; long or narrow supply lines may reduce performance. Wind changes the spray pattern. The values below describe the diameter of the watered area.
Technical specifications
- Manufacturer: Bradas
- Model: GKV5040SGZ
- Material: Brass
- Sprinkler type: Impulse sprinkler with adjustable watering sector
- Connection: 1/2-inch male thread
- Sector adjustment: 20–360°
- Operating modes: Sector operation or 360° full circle
- Mounting: On a suitable mount with 1/2-inch female thread; tripod/ground spike not included
- Performance at 1 bar: 10.33 l/min; 21 m diameter
- Performance at 1.5 bar: 12.49 l/min; 22 m diameter
- Performance at 2 bar: 14.11 l/min; 23 m diameter
- Performance at 2.5 bar: 15.82 l/min; 24 m diameter
- Performance at 3 bar: 17.33 l/min; 24 m diameter
- Performance at 3.5 bar: 18.28 l/min; 25 m diameter
- Range: Dependent on pressure, water volume and wind
- Applications: Lawns, beds, gardens and other green areas
Frequently asked questions
How do I set the watering sector?
The sector limit allows a range between 20 and 360 degrees to be selected. Set it according to the instructions and check during operation that the intended area is reached.
Can the sprinkler water only part of an area?
Yes. In addition to a full circle, a limited sector from 20 degrees can be selected. This can, for example, water an area in front of a wall without operating all around the sprinkler.
How is the sprinkler mounted?
Use the ½-inch male thread with a suitable mount having a ½-inch female thread, such as a suitable tripod, ground spike or permanently installed supply line. The fixing must be stable; a tripod and ground spike are required separately if chosen.
Are the stated metre values radius or diameter?
They are diameters. At 3.5 bar, 25 m diameter is specified, corresponding to a 12.5 m radius from the sprinkler to the edge under the intended operating conditions.
How much water does the sprinkler require?
The manufacturer values range from 10.33 l/min at 1 bar to 18.28 l/min at 3.5 bar. The supply must maintain the required pressure at this water flow. High static pressure at a closed tap alone is not sufficient.
What should I do before winter storage?
Before frost, remove the sprinkler, empty it completely and store it dry. This prevents water remaining inside from freezing.
Technical specifications
| Connection type | Male thread |
|---|---|
| Connection details | Inlet: 1/2-inch male thread |
| Connection system | Thread |
| Irrigation method | Circular spray |
| Colour group | Yellow, Grey, Black |
| Brand | Bradas |
| Material | Brass |
| Product type | Sprinkler |
Selection & guidance
Selection & guidance
Before choosing, check the details in the product description and the manufacturer's guidance. Our customer service team can help with any questions.
Shipping & returns
Shipping & returns
We ship from Germany. Shipping policy · Cancellations and returns
Manufacturers
Manufacturer
BRADAS Group Sp. z o.o.ul. Marii Konopnickiej 5
46-300 Olesno
Polen
https://bradas.pl/
Responsible person in the EU
Bradasul. Marii Konopnickiej 5
46-300 Olesno
Polen
https://bradas.pl/
Get notified when your size is back in stock
Leave your email address. We'll send you updates about your selected variant.
For your next job
Cofra welding shoes Tago S3 with steel toe cap and steel midsole
Safety shoes · S3
Regular price 15.400 Ft *Unit priceCofra safety shoes Reno S3 SRC in smooth leather
Safety shoes · S3
Regular price 14.700 Ft *Unit priceCofra women's safety shoes Alice S3 SRC with aluminium toe cap
Safety shoes · S3
Regular price 23.400 Ft *Unit priceCofra safety shoes THROW S3 SRC with aluminium toe cap
Safety shoes · S3
Regular price 26.000 Ft *Unit priceCofra safety shoe New Volga S3 SRC in leather
Safety shoes · S3
Regular price 13.800 Ft *Unit priceCOFRA safety shoes Riga S3 SRC with steel toe cap
Safety shoes · S3
Regular price 13.000 Ft *Unit priceCofra safety shoes CREGAN S3 SRC made from nubuck leather
Safety shoes · S3
Regular price 27.100 Ft *Unit priceCofra women's safety shoes WANDA S3 SRC full-grain leather
Safety shoes · S3
Regular price 27.500 Ft *Unit price
Loading products …
Loading products …
