Climax

Climax full-face respirator 741, Class 3

Name: Climax full-face respirator 741, Class 3
Brand: Climax
SKU: 9127
Price: 77.49 EUR
Availability: OutOfStock

€77,49

Tax included Shipping calculated at checkout.

EN 148-1EN 136EN 166

Shipped from Germany · 30-day right of withdrawal

The Climax 741 class 3 full-face respirator complies with EN 136:1998 and combines a close-fitting TPE mask body with a polycarbonate panoramic visor. The Rd40 screw connection according to EN 148-1 accepts the specif...

Description

Rd40 filter connection and visor

The Rd40 connection is designed for Climax 725 gas, particle and combination filters. Even where the thread fits mechanically, use only a combination approved by the manufacturer. The filter type must suit the contaminant and its concentration. The scratch-resistant panoramic visor has optical class 1 and impact-resistance marking F according to EN 166:2001.

Mask body and fit

The flexible sealing lip must contact the face continuously. Tighten the straps evenly and perform the seal check according to the manufacturer’s instructions before every use. Beards, hair or unsuitable spectacle arms in the sealing area can cause leaks.

Limits of filter respirator protection

Do not use the mask with unknown contaminants or in an immediately dangerous atmosphere. The manufacturer also excludes substances with poor warning properties and chemicals that react strongly exothermically in the filter. Containers, tunnels and other areas where oxygen deficiency is possible require properly planned breathing apparatus independent of ambient air.

Technical specifications

Manufacturer: Productos Climax
Model: 741
Protection class: Class 3 according to EN 136:1998
Filter connection: EN 148-1, Rd40
Visor: Polycarbonate, optical class 1, impact resistance F according to EN 166:2001
Mask body: Thermoplastic elastomer (TPE)
Harness: 5-point
Weight: 435 g
Oxygen environment: Only in atmospheres with more than 19.5% oxygen

Frequently asked questions

Which filters fit this full-face respirator?

The Climax 741 has an Rd40 connection according to EN 148-1 for the Climax 725 filter range. Select the filter type based on the hazardous substance, concentration and working conditions; the connection alone does not determine protection.

What does mask class 3 mean?

Class 3 describes a full-face mask for particularly demanding use. The design class is not an FFP class and alone specifies neither the permitted contaminant concentration nor the service duration.

What do optical class 1 and F mean for the visor?

Optical class 1 concerns optical quality. F indicates tested impact resistance against particles with low impact energy. These two details must not be confused with the filter’s respiratory protection.

Can I use the mask in an oxygen-deficient atmosphere?

No. The mask does not supply oxygen. The manufacturer requires more than 19.5% oxygen by volume. This filter mask is unsuitable for an unknown atmosphere or an immediate danger to life and health.

How do I clean the mask after use?

Remove the filter before cleaning and do not wash it. Clean the mask parts according to the manufacturer’s instructions with a suitable mild cleaner, rinse carefully and dry without direct heat. Check the sealing lip, valves, visor and straps before the next use.

Can I wear the full-face mask with a beard?

There must be no facial hair in the sealing-line area. Even short stubble can impair the seal. Tightening the harness firmly cannot reliably compensate for a leaking seal.

Technical specifications

Colour group	Black
Compatibility	Rd40 thread according to EN 148-1; 725 series filters
Brand	Climax
Material	Rubber
Standard	EN 148-1, EN 136, EN 166
Product type	Full-face mask
Viewing window	Clear
Protection marking	EN 136 Class 3; visor optical Class 1, F
Use	Reusable