Bradas

2-in-1 punch tool for irrigation pipes, 3 or 8 mm – Bradas

€2,49

Tax included Shipping calculated at checkout.

Size

3 mm 8 mm

Shipped from Germany · 30-day right of withdrawal

The red Bradas 2-in-1 tool punches an opening and then helps insert a suitable fitting. Versions for 3- or 8-mm openings are available. The hole size, pipe and fitting must be compatible. Punching and inserting a fit...

Description

The red Bradas 2-in-1 tool punches an opening and then helps insert a suitable fitting. Versions for 3- or 8-mm openings are available. The hole size, pipe and fitting must be compatible.

Punching and inserting a fitting

Place the punch tip vertically on the pipe, then guide the suitable fitting into the opening using the notch. The hole size, pipe wall and fitting must be compatible for a correct fit.

Choosing the right variant

Choose the 3- or 8-mm version according to the requirements of the irrigation system being used. Use the tool only on pipes whose material and wall thickness are suitable for it.

Technical specifications

Manufacturer: Bradas
Function: Punching and inserting suitable fittings
Hole sizes: 3 mm or 8 mm, selectable variant
Colour: Red
Guide: Notch for inserting fittings
Suitable for: Irrigation pipes with the matching hole and fitting size
Applications: Drip irrigation and other irrigation systems

Frequently asked questions

Are 3 and 8 mm the diameters of the irrigation pipes?

No. These specifications describe the openings to be made. The correct hole size depends on the fitting being inserted and the irrigation system’s requirements.

Can one tool punch both hole sizes?

These are separate selectable versions for 3 or 8 mm. You need the appropriate version for each hole size.

What is the notch on the tool for?

It helps guide and press a suitable fitting into the prepared opening. The fitting and insertion aid must have compatible designs.

How should I prepare the pipe?

Turn off the water supply, release the pressure and hold the pipe securely. Work only on pipes that the irrigation system specifies for this type of punch installation. Do not damage the opposite pipe wall when punching through.

Does the tool seal an opening that is too large?

No. The hole punch creates the opening. If it is too large or damaged, repair the area according to the irrigation system’s instructions; pressing the fitting in harder will not correct the fault.

Technical specifications