Bradas

PE reducing tee, 25/20 to 32/25 mm – Bradas

€2,49

Tax included Shipping calculated at checkout.

Size

25x20x25 mm 32x20x32 mm 32x25x32 mm

Shipped from Germany · 30-day right of withdrawal

The Bradas tee connects a continuous PE main line to a smaller branch. The branch and reduction are combined in one fitting, eliminating an additional connection point. Connections and variants The main-line passage ...

Description

The Bradas tee connects a continuous PE main line to a smaller branch. The branch and reduction are combined in one fitting, eliminating an additional connection point.

Connections and variants

The main-line passage is 25 or 32 mm, depending on the version. The reduced branch is 20 or 25 mm. Available variants are 25×20×25, 32×20×32 and 32×25×32 mm.

Installation and use

Insert the PE pipes and tighten the three union nuts by hand. The integrated O-rings seal the connections. The fitting is suitable for garden irrigation, distribution pipes, lawn sprinklers and drip irrigation, as well as above-ground and underground installation.

Preparing the pipe end and checking the connection

Choose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.

Technical specifications

Manufacturer: Bradas
Type: Reducing tee
Material: High-quality plastic, T-shaped
Main passage: 25 or 32 mm, depending on the variant
Branch: 20 or 25 mm, reduced
Variants: 25×20×25, 32×20×32 and 32×25×32 mm
Union nuts: 3 pieces, suitable for hand tightening
Seals: 3 integrated O-rings
Installation: Tool-free
Properties: UV-resistant, weather-resistant and corrosion-free
Use: Above-ground and underground installation

Frequently asked questions

Which pipe measurements do I need to compare?

The specifications refer to the outside diameter of the PE pipe. Available versions are 25 × 20 × 25, 32 × 20 × 32 and 32 × 25 × 32 mm. The two matching measurements belong to the continuous main line.

What does 32×20×32 mm mean?

The two outer 32 mm measurements indicate the passage of the main line. The middle 20 mm measurement indicates the reduced branch.

Does the tee divide the water volume evenly?

No. Distribution depends on pipe diameter, line length, changes in height and connected consumers. The reduced branch does not replace flow or pressure regulation.

Is additional sealant required?

No. The three integrated O-rings are intended to seal the connections.

Can the tee be installed underground?

Yes. The fitting is specified for above-ground and underground installation.

Technical specifications

Connection type	Clamp connection
Connection details	T-piece for PE pipes with a reduced branch and three O-ring seals
Connection system	Pipe clamping
Properties	UV-resistant
Colour group	Grey, Black
Brand	Bradas
Material	Plastic
Operating medium	Water
Product type	Connector