Bradas

Drip irrigation connector set, 27 pieces, 16 mm – Bradas

Name: Drip irrigation connector set, 27 pieces, 16 mm – Bradas
Brand: Bradas
SKU: 4707
Price: 2.99 EUR
Availability: InStock

€2,99

Tax included Shipping calculated at checkout.

Shipped from Germany · 30-day right of withdrawal

The 27-piece Bradas DSWA20-SET1 accessory set connects, branches and closes compatible 16 mm drip hoses. The combination of tees, 90° elbows and end caps helps with routing around beds and planting rows. The tap conne...

Description

Included are one 1/2-inch tap connector, one valve with 1/2-inch male thread, ten tees, five 90° elbows and ten end caps for compatible 16 mm drip hoses. The drip hose itself is required separately.

Installation

Cut the hose straight and without crushing it, then push it onto the barbs of the connectors. The hose type, internal diameter and wall thickness must match the barb connection. After assembly, open the water supply slowly and check every connection for secure fit and leaks.

Planning the pipe routing

Tees divide one line into branches. Elbows route the hose around right-angled corners without sharp bending. End caps close the ends of the lines. The valve shuts off the connected line. Provide a filter and pressure reducer suited to the requirements of the drip hose used.

Technical specifications

Set contents: 27 pieces
Tap connector: 1 piece, 1/2 inch
Valve: 1 piece, 1/2-inch male thread
Tees: 10 pieces for 16 mm line
Elbows: 5 pieces, 90°, for 16 mm drip hose
End caps: 10 pieces for 16 mm line
Compatible line: Compatible 16 mm drip hose; consider hose type, internal dimensions and wall thickness
Contents: Drip line not included
Brand / model: Bradas DSWA20-SET1
Material: Black plastic

Frequently asked questions

Will every hose labelled 16 mm fit?

The connectors are intended for compatible 16 mm drip hoses. Because the hose is pushed onto a barb, the internal dimensions, wall thickness and hose type are also important. The same outside diameter alone is not sufficient for identification.

Is the hose inserted into the connector?

With these barb connectors, the hose is pushed over the barb. The hose end must be cut cleanly and sit fully on the connection.

Does the set include drip hose and a filter?

No. The set contains the 27 listed connection and joining parts. Add compatible drip hose and, where required, filtration or pressure regulation.

Can I control several irrigation zones independently?

Tees allow several branches. However, the single valve included can only shut off the connected water line as a whole. Separate valves are required for independently switchable branches.

What line length is possible?

The permitted length depends on the drip hose, its emitters, the available water volume and the pressure. The accessory set does not specify a general maximum line length.

Technical specifications

Connection type	Hose tail, Female thread, Male thread, Plug, Blanking plug
Connection details	Hose end: 16 mm; tap connection: 1/2 inch
Connection system	Hose tail, Thread, Quick-connect system
Irrigation method	Drip irrigation
Colour group	Black, Green
Brand	Bradas
Material	Plastic
Pack unit	Σετ
Pack quantity	27 Pieces
Product type	Accessories
Water flow control	Manual shut-off