Bradas

1-inch DN25 hose connector with hose tails – Bradas

Name: 1-inch DN25 hose connector with hose tails – Bradas
Brand: Bradas
SKU: 324
Price: 2.49 EUR
Availability: InStock

€2,49

Tax included Shipping calculated at checkout.

Shipped from Germany · 30-day right of withdrawal

The Bradas hose connector joins two 1-inch garden hoses with DN25 or 25 mm internal diameter. Insert the hose tails on both sides into the hose ends; circumferential profile ribs help grip the inside of the hose wall....

Description

Installing the hose-tail connection

Cut the undamaged hose ends square and push them fully over the hose tails. If required, warm water makes fitting easier. Secure each hose side with a clamp suited to the hose’s outside size, particularly for pump operation and permanent installations.

Material and connection size

The connector is made from impact-resistant PVC and designed for 1-inch hoses. It is a push-fit hose-tail connector and is not intended for a click-fit coupling system. The stated rating is up to approximately 8 bar working pressure.

Technical specifications

Brand: Bradas
Connection: 1-inch hose tail on both sides for DN25 / 25 mm hoses
Connection type: Push-fit hose-tail connector
Material: Impact-resistant PVC
Profile: Circumferential anti-slip profile ribs
Installation: Push on without tools; hose clamp recommended
Working pressure: Stated up to approximately 8 bar
Colour: Orange / grey
Use: Hose extension and repair
Resistance: UV- and weather-resistant

Frequently asked questions

Which hoses fit this connector?

The connector is designed for two 1-inch hoses with DN25 or 25 mm internal diameter.

How is the connector installed?

Cut the hose ends cleanly and square, then push them onto both hose tails. If required, warm water can make fitting easier.

Is a hose clamp required?

Additional suitable clamps are particularly recommended for pump systems and permanent installations. Secure both sides separately. Check the connection for leaks and secure seating before use.

Does the connector fit a 3/4-inch hose?

No. Both sides are designed for 1-inch hoses. A suitable reducing connector is required for different hose sizes.

Is the connector intended for a click system?

No. It is a push-fit hose-tail connector, not a click coupling.

Technical specifications

Connection type	Hose tail
Connection details	1-inch hose barbs on both ends (DN25)
Connection system	Hose tail
Colour group	White, Grey
Brand	Bradas
Material	Polyvinyl chloride
Product type	Connector
Water flow control	No flow control