{"title":"Drilling tools \u0026 accessories","description":"\u003cp\u003eA round through-hole, a blind hole and a large opening are different drilling tasks. Note the material, required diameter, drilling depth and your machine's tool holder. This helps you choose the tool type first, then the individual size.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/en\/collections\/bohrer\"\u003eCompare drill bits\u003c\/a\u003e · \u003ca href=\"\/en\/collections\/bohrzubehoer-aufsatze\"\u003eDrilling accessories and attachments\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eFrom the hole you need to the right purchase\u003c\/h2\u003e\u003cdiv class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Choose drilling tools by drilling task\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003cth\u003eWhere to start\u003c\/th\u003e\n\u003cth\u003eWhen to rule it out\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eA hole of a specified diameter\u003c\/th\u003e\n\u003ctd\u003eCompare drill bits by material, diameter, usable length and machine fitting\u003c\/td\u003e\n\u003ctd\u003eA compatible fitting is not enough if the bit is unsuitable for the material or required depth.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarge round opening\u003c\/th\u003e\n\u003ctd\u003eCheck a hole saw specified for the material and opening size; add mounting, centring or guide components only if the particular version requires them\u003c\/td\u003e\n\u003ctd\u003eIf a connecting component required by the manufacturer is missing, the combination is incomplete.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdding to existing drilling tools\u003c\/th\u003e\n\u003ctd\u003eCheck holders, adapters or guides at both connection points\u003c\/td\u003e\n\u003ctd\u003eAn adapter does not resolve an unverified connection at the cutting tool.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eExample: an opening for a cable feed-through\u003c\/h2\u003e\u003cp\u003eMeasure the required opening diameter and material thickness. For a larger round opening, the comparison leads to a hole saw rather than a set of small twist drill bits. Then check the chosen hole saw against your existing machine and add only the mounting, centring or guide components required by its manufacturer's documentation. This avoids assuming that a pilot drill is always needed or overlooking an essential system component.\u003c\/p\u003e\u003cp\u003eFor individual drill bits, go to \u003ca href=\"\/en\/collections\/bohrer\"\u003eDrill bits\u003c\/a\u003e; find additional components under \u003ca href=\"\/en\/collections\/bohrzubehoer-aufsatze\"\u003eDrilling accessories and attachments\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"neo-tools-moertelruehrer-m14-120-mm-600-mm-aus-metall","title":"Mortar mixer M14 120 mm × 600 mm made of metal – NEO Tools","description":"\u003cp\u003eThe NEO Tools mortar mixer paddle with M14 threaded fitting mixes mortar, render, tile adhesive, screed and other viscous materials. Its mixing head has a diameter of 120 mm and the metal shaft is 600 mm long. The smooth metal surface makes cleaning easier immediately after use.\u003c\/p\u003e\n\u003ch2\u003eFor viscous mixtures\u003c\/h2\u003e\n\u003cp\u003eThe 120 mm mixing head diameter supports the mixing of heavy materials in buckets up to approximately 30 litres. For an even result, immerse the mixing head fully in the mixture and operate it with a suitable drive unit.\u003c\/p\u003e\n\u003ch2\u003eM14 fitting and cleaning\u003c\/h2\u003e\n\u003cp\u003eScrew the paddle into a suitable drive unit with a matching M14 fitting. Clean the mixing head immediately after use: remove water-soluble residues with water; for other materials, follow their cleaning instructions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO Tools\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThreaded fitting:\u003c\/strong\u003e M14\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMixing head diameter:\u003c\/strong\u003e 120 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShaft length:\u003c\/strong\u003e 600 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable materials:\u003c\/strong\u003e Paints, varnishes, glazes, paste, mortar, render, screed, tile adhesive and filler compounds\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable container size:\u003c\/strong\u003e Up to approximately 30 litres\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSurface:\u003c\/strong\u003e Smooth, easy to clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat fitting does the drive unit require?\u003c\/h3\u003e\n\u003cp\u003eThe paddle has an M14 threaded fitting and requires a compatible mixer or device with an M14 fitting.\u003c\/p\u003e\n\u003ch3\u003eWhich materials can be mixed?\u003c\/h3\u003e\n\u003cp\u003eThe paddle is suitable for paints, varnishes, paste, mortar, render, screed, tile adhesive and filler compounds, among other materials.\u003c\/p\u003e\n\u003ch3\u003eWhat bucket size is the paddle designed for?\u003c\/h3\u003e\n\u003cp\u003eThe combination of the 120 mm mixing head and 600 mm shaft length is intended for buckets up to approximately 30 litres.\u003c\/p\u003e\n\u003ch3\u003eHow is the paddle cleaned?\u003c\/h3\u003e\n\u003cp\u003eRinse water-soluble residues off directly with water. For paints, varnishes and other materials, use a suitable cleaning agent in accordance with the material instructions.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65815523787101,"sku":"1891","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/mrtelrhrer-m14jpg-12403904.jpg?v=1788694702"},{"product_id":"bohrhammer-1050-w-16-mm-bohrfutter","title":"GRAPHITE impact drill 58G712, 1050 W","description":"\u003cp\u003eThe GRAPHITE 58G712 is a corded impact drill with a 1050 W motor. The keyed chuck accepts round-shank drill bits from 3 to 16 mm; two speeds cover different drilling tasks.\u003c\/p\u003e\n\u003ch2\u003eDrilling and impact drilling\u003c\/h2\u003e\n\u003cp\u003eThe machine provides drilling and impact drilling. The manufacturer’s data specify speeds of 0 to 900 and 0 to 2500 revolutions per minute, with impact rates of up to 40,000 per minute.\u003c\/p\u003e\n\u003ch2\u003eChuck and handling\u003c\/h2\u003e\n\u003cp\u003eThe 3 to 16 mm keyed chuck is tightened with the chuck key. An auxiliary handle supports control during work. Switching between drilling and impact drilling is carried out according to the instructions and the bit being used.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 58G712\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 1050 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChuck:\u003c\/strong\u003e Keyed chuck, 3 to 16 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGears:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpeed:\u003c\/strong\u003e 0 to 900 \/ 0 to 2500 rpm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum drilling diameter:\u003c\/strong\u003e Steel 16 mm, concrete 20 mm, wood 40 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e GRAPHITE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs this a rotary hammer with chiselling function?\u003c\/h3\u003e\n\u003cp\u003eNo. This model uses a 3 to 16 mm keyed chuck for round-shank drill bits. An SDS mount is a different interface and is not part of this chuck.\u003c\/p\u003e\n\u003ch3\u003eWhich drill bits fit?\u003c\/h3\u003e\n\u003cp\u003eThe keyed chuck is designed for suitable round-shank drill bits with a shank diameter of 3 to 16 mm.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65819437728093,"sku":"2482","price":90.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/2482-komplettjpeg-12404438.jpg?v=1788695033"},{"product_id":"gipsruehrer-80-mm-380","title":"Plaster mixer with hexagonal shank and 80 mm mixing basket","description":"\u003cp\u003eThe plaster mixer has a mixing basket with a diameter of 80 mm and a hexagonal shank. It is suitable for mixing plaster, mortar, tile adhesive and filler with a compatible drive.\u003c\/p\u003e\n\u003ch2\u003eFor viscous building materials\u003c\/h2\u003e\n\u003cp\u003eThe basket geometry moves plaster, mortar, tile adhesive and filler in the container. For thin liquid paints, a paint mixer designed for this purpose is the more suitable choice.\u003c\/p\u003e\n\u003ch2\u003eHexagonal shank for compatible chucks\u003c\/h2\u003e\n\u003cp\u003eThe shank has a hexagonal profile. The drill chuck or clamping holder of the drive used must securely accept this shape and size.\u003c\/p\u003e\n\u003ch2\u003eClean after mixing\u003c\/h2\u003e\n\u003cp\u003eRinse the mixing basket with water immediately after use, before plaster or mortar hardens.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMixing basket diameter:\u003c\/strong\u003e 80 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShank length:\u003c\/strong\u003e 380 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShank:\u003c\/strong\u003e Hexagonal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable materials:\u003c\/strong\u003e Plaster, mortar, tile adhesive and filler\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCleaning:\u003c\/strong\u003e Can be rinsed with water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich materials is the mixer suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for plaster, mortar, tile adhesive and filler.\u003c\/p\u003e\n\u003ch3\u003eWhat type of shank does the mixer have?\u003c\/h3\u003e\n\u003cp\u003eIt has a hexagonal shank. The drive used must securely accept this shape and size.\u003c\/p\u003e\n\u003ch3\u003eWhat size is the mixing basket?\u003c\/h3\u003e\n\u003cp\u003eThe mixing basket has a diameter of 80 mm.\u003c\/p\u003e\n\u003ch3\u003eCan the mixer also be used for paint?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists paint as a possible building material. For thin liquid paints, however, a specialist paint mixer is the more suitable choice.\u003c\/p\u003e\n\u003ch3\u003eHow is the mixing basket cleaned?\u003c\/h3\u003e\n\u003cp\u003eRinse it with water immediately after mixing and do not allow residues to harden.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65819475018077,"sku":"948","price":1.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersoffice3desktopgibsrhrerjpg-11941414.jpg?v=1788693436"},{"product_id":"neo-tools-sds-plus-moertelruehrer-600-mm-100-oder-120-mm","title":"SDS-Plus mortar mixing paddle, 600 mm, Ø 100 or 120 mm – NEO Tools","description":"\u003cp\u003eThe NEO Tools mixing paddle connects to a suitable power tool via an SDS-Plus shank and reaches deep buckets and tubs with its 600 mm shaft. Depending on the version, the mixing diameter is 100 or 120 mm. It is intended for suitable paints, varnishes, glazes, wallpaper paste, tile adhesive, render and mortar mixes.\u003c\/p\u003e\n\u003ch2\u003eChoose the right size\u003c\/h2\u003e\n\u003cp\u003eThe 100 mm diameter is suitable for narrower containers and smaller mixing quantities. The 120 mm version covers more material per operation and therefore requires a sufficiently powerful drive and a container with enough space.\u003c\/p\u003e\n\u003ch2\u003eSDS-Plus shank and cleaning\u003c\/h2\u003e\n\u003cp\u003eUse rotary mode only, without the hammer function. The drive must be suitable for the paddle diameter, mixing material and quantity. Disconnect the paddle from the drive before cleaning. Remove water-soluble residues promptly with water; for other materials, follow the cleaning instructions of the material manufacturer. Dry afterwards.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 600 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMixing diameter:\u003c\/strong\u003e 100 or 120 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanised steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSurface:\u003c\/strong\u003e Galvanised\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable media:\u003c\/strong\u003e Paints, varnishes, glazes, wallpaper paste, tile adhesive, render and suitable mortar mixes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCleaning:\u003c\/strong\u003e Clean promptly and according to the mixing material, then dry\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO Tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the paddle fit every drill?\u003c\/h3\u003e\n\u003cp\u003eThe machine needs a compatible SDS-Plus holder and must be designed for mixing work with this diameter. Work without the hammer function. A standard keyed or keyless chuck does not directly accept the shank as intended.\u003c\/p\u003e\n\u003ch3\u003eWhich diameters are available?\u003c\/h3\u003e\n\u003cp\u003eThe paddle is available with a mixing diameter of 100 or 120 mm.\u003c\/p\u003e\n\u003ch3\u003eCan the paddle mix concrete?\u003c\/h3\u003e\n\u003cp\u003eGeneral suitability for concrete cannot be confirmed. For heavy or coarse mixes, the paddle and drive must be expressly designed for them.\u003c\/p\u003e\n\u003ch3\u003eHow should the paddle be cleaned after use?\u003c\/h3\u003e\n\u003cp\u003eDisconnect it from the drive before cleaning. Remove water-soluble residues before they harden. For solvent-based paints or other mixing materials, follow their cleaning instructions; water is not necessarily sufficient.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"100 mm","offer_id":65833819472221,"sku":"3041-100","price":4.99,"currency_code":"EUR","in_stock":false},{"title":"120 mm","offer_id":65834759061853,"sku":"3041-120","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tsclientdesktopmrtelrhrer-sdsjpg-12405091.jpg?v=1788727610"},{"product_id":"akkuladegeraet-18-v-graphite-energy","title":"GRAPHITE Energy+ Charger 58G002-1 for 18 V Batteries","description":"\u003cp\u003eThe GRAPHITE Energy+ 58G002-1 charger charges compatible 18 V Li-ion batteries. The LED indicator shows mains power, charging and readiness.\u003c\/p\u003e\n\u003ch2\u003eConnection and indicator\u003c\/h2\u003e\n\u003cp\u003eThe charger operates from a 220–240 V mains supply. The LED indicator makes it easier to monitor the charging status.\u003c\/p\u003e\n\u003ch2\u003eCompatible batteries\u003c\/h2\u003e\n\u003cp\u003eThe charger is designed for the GRAPHITE Energy+ system with 18 V Li-ion batteries. The same voltage rating alone does not mean compatibility with batteries from other systems. Keep the charger dry during charging and leave the ventilation openings clear.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 58G002-1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery system:\u003c\/strong\u003e GRAPHITE Energy+ 18 V Li-ion\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging current:\u003c\/strong\u003e 2400 mA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains input:\u003c\/strong\u003e 220–240 V AC, 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicator:\u003c\/strong\u003e LED\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e GRAPHITE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 21 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich batteries is the charger intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for compatible GRAPHITE Energy+ Li-ion batteries with 18 V. Check system compatibility before inserting a battery.\u003c\/p\u003e\n\u003ch3\u003eHow can I identify the charging status?\u003c\/h3\u003e\n\u003cp\u003eThe LED indicator shows mains power, charging and readiness according to the instruction manual.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65834763059549,"sku":"2719","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/akkuladegert-graphite-energyjpg-12404804.jpg?v=1788726083"},{"product_id":"graphite-bohrmaschinenstaender-400-mm-mit-tiefenmesser","title":"GRAPHITE Drill Stand 400 mm with Depth Gauge","description":"\u003cp\u003eThe GRAPHITE drill stand guides a compatible hand drill for repeatable drilling. The head tilts from 0° to 90°, allowing angled as well as vertical drilling. A depth gauge helps set the drilling depth. The solid cast base has a machined work surface with grooves and can be secured to a worktop.\u003c\/p\u003e\n\u003ch2\u003eMount and adjustment options\u003c\/h2\u003e\n\u003cp\u003eThe holder accepts drills with a flange diameter of 43 mm. Reduction adapters for 25, 39 and 42 mm are included. The stand head provides 60 mm of stroke and can be adjusted from 0° to 90°.\u003c\/p\u003e\n\u003ch2\u003eStable workshop base\u003c\/h2\u003e\n\u003cp\u003eThe cast base provides a stable foundation for guided work. Grooves in the machined work surface support the attachment of hold-down clamps and vices. Four holes allow mounting to a suitable worktop. Maximum machine power is 900 W.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOverall height:\u003c\/strong\u003e 400 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTilting range:\u003c\/strong\u003e 0° to 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMount:\u003c\/strong\u003e Flange diameter 43 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReduction adapters:\u003c\/strong\u003e For 25, 39 and 42 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase:\u003c\/strong\u003e Solid cast base, machined work surface with grooves\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReturn:\u003c\/strong\u003e Return spring on lever\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum machine power:\u003c\/strong\u003e 900 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e Drill stand and spanner set; drill not included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e GRAPHITE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColumn:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich drills fit the stand?\u003c\/h3\u003e\n\u003cp\u003eDrills with a flange diameter of 43 mm are suitable. The supplied adapters also allow 25, 39 and 42 mm. Machine power must not exceed 900 W.\u003c\/p\u003e\n\u003ch3\u003eIs a drill included?\u003c\/h3\u003e\n\u003cp\u003eNo. The scope of delivery includes the drill stand and a spanner set; the drill must be provided separately.\u003c\/p\u003e\n\u003ch3\u003eIs angled drilling possible?\u003c\/h3\u003e\n\u003cp\u003eYes. The stand head can be adjusted from 0° to 90°.\u003c\/p\u003e\n\u003ch3\u003eHow is the drilling depth set?\u003c\/h3\u003e\n\u003cp\u003eThe required depth is set using the integrated depth gauge.\u003c\/p\u003e\n\u003ch3\u003eCan the drill stand be mounted on a worktop?\u003c\/h3\u003e\n\u003cp\u003eYes. The base has four holes for mounting to a suitable worktop.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65834820993373,"sku":"2428","price":58.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/bohrstnderjpg-12404789.jpg?v=1788726012"},{"product_id":"graphite-moertelruehrer-mit-m14-gewinde-120-mm-x-590-mm","title":"Graphite mortar mixing paddle with M14 thread, 120 mm x 590 mm","description":"\u003cp\u003eThe Graphite mixing paddle, with a diameter of 120 mm, is designed for evenly mixing mortar, gypsum plaster, adhesive mortar, paints and fillers. The 590 mm version must suit the required immersion depth and the size of the mixing vessel. The M14 thread connects the paddle to a suitable mixer with a matching spindle.\u003c\/p\u003e\n\u003ch2\u003eFor medium mixing quantities\u003c\/h2\u003e\n\u003cp\u003eThe 120 mm paddle head provides a large mixing area for medium to larger quantities. This design supports even mixing of building materials and coating materials.\u003c\/p\u003e\n\u003ch2\u003eM14 fitting\u003c\/h2\u003e\n\u003cp\u003eThe M14 thread is intended for mixers with a matching spindle. An adapter alone does not automatically make a drill suitable for this 120 mm mixing head; power, speed and permitted paddle size must match the machine.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Graphite\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 120 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 590 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting:\u003c\/strong\u003e M14 thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.13 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable materials:\u003c\/strong\u003e Mortar, gypsum plaster, adhesive mortar, paints, varnishes and fillers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCleaning:\u003c\/strong\u003e Clean according to the material being mixed and its processing instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the paddle fit a machine with an M14 spindle?\u003c\/h3\u003e\n\u003cp\u003eThe fitting must be M14. The mixer must also be designed for a 120 mm paddle head and the material being mixed.\u003c\/p\u003e\n\u003ch3\u003eCan the paddle be used in a drill?\u003c\/h3\u003e\n\u003cp\u003eA drill is suitable only if its power, speed and permitted paddle size match the 120 mm mixing head. An adapter alone does not ensure suitability.\u003c\/p\u003e\n\u003ch3\u003eWhich materials is the mixing paddle suitable for?\u003c\/h3\u003e\n\u003cp\u003eSuitable materials include mortar, gypsum plaster, adhesive mortar, paints, varnishes and fillers. Concrete aggregate is not among the specified materials.\u003c\/p\u003e\n\u003ch3\u003eHow is the paddle cleaned?\u003c\/h3\u003e\n\u003cp\u003eDisconnect the machine from the power supply before cleaning and remove the paddle. Use water only with materials that can be cleaned with water. Remove residue before it hardens, following the material's processing instructions.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65834849272157,"sku":"2804","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tsclientbildermrtelrhrer-m14jpg-12404435.jpg?v=1788724708"},{"product_id":"graphite-moertelruehrer-mit-m14-gewinde-160-mm-x-620-mm","title":"Graphite mortar mixing paddle with M14 thread, 160 mm x 620 mm","description":"\u003cp\u003eThe Graphite mortar mixing paddle, with a diameter of 160 mm, is designed for dense and viscous building materials on site. Its overall length is 620 mm; the immersion depth and vessel size must suit the paddle head. The M14 thread fits mixers with a matching spindle.\u003c\/p\u003e\n\u003ch2\u003eFor dense mixtures\u003c\/h2\u003e\n\u003cp\u003eThe large paddle head supports mixing mortar, plaster, screed and tile adhesive. The paddle geometry moves the material upwards. Choose a mixing paddle designed for the material when mixing thin paints and varnishes.\u003c\/p\u003e\n\u003ch2\u003eLong version with M14 thread\u003c\/h2\u003e\n\u003cp\u003eWith an overall length of 620 mm, the paddle reaches the lower part of suitable buckets, tubs and mixing troughs. Before use, check that the mixer is designed for the paddle diameter and the consistency of the material.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Graphite\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 160 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 620 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting:\u003c\/strong\u003e M14 thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable materials:\u003c\/strong\u003e Dense mortar, plaster, screed and tile adhesive\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePaddle geometry:\u003c\/strong\u003e Moves the material upwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the paddle fit my mixer?\u003c\/h3\u003e\n\u003cp\u003eThe paddle fits mixers with an M14 fitting. The diameter and material being mixed must also be compatible with the machine's power.\u003c\/p\u003e\n\u003ch3\u003eIs the mixing paddle suitable for paint?\u003c\/h3\u003e\n\u003cp\u003eIt is primarily designed for dense materials. For thin paints, use a mixing paddle suited to that material.\u003c\/p\u003e\n\u003ch3\u003eHow long is the mortar mixing paddle?\u003c\/h3\u003e\n\u003cp\u003eThe overall length is 620 mm.\u003c\/p\u003e\n\u003ch3\u003eWhich building materials is the 160 mm paddle designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for dense mortar, plaster, screed and tile adhesive.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65834849403229,"sku":"2805","price":13.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tsclientbildermrtelrhrer-160jpg-12404436.jpg?v=1788724711"},{"product_id":"farbruehrer-80-mm-400","title":"Paint mixer 80 mm × 400 mm","description":"\u003cp\u003eThe paint mixer with an 80 mm mixing basket and 400 mm dimension is suitable for mixing paints and coatings. The robust metal construction can be cleaned and reused after use.\u003c\/p\u003e\n\u003ch2\u003eFor paints and coatings\u003c\/h2\u003e\n\u003cp\u003eThe mixer is intended for paints, varnishes, stains and comparable coatings. For heavy, pasty media, use a mixer designed for this purpose.\u003c\/p\u003e\n\u003ch2\u003eDimensions and construction\u003c\/h2\u003e\n\u003cp\u003eThe mixing basket has a diameter of 80 mm. The stated product dimensions are 80 mm × 400 mm.\u003c\/p\u003e\n\u003ch2\u003eCleaning after use\u003c\/h2\u003e\n\u003cp\u003eClean the mixer immediately after work with a cleaning agent suitable for the material used. Do not allow paint residue to dry.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMixing basket diameter:\u003c\/strong\u003e 80 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProduct dimensions:\u003c\/strong\u003e 80 mm × 400 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Paints and coatings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrive:\u003c\/strong\u003e Suitable drill\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5907558440331\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich materials is the paint mixer suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for paints, varnishes, stains and comparable coatings.\u003c\/p\u003e\n\u003ch3\u003eWhat is the diameter of the mixing basket?\u003c\/h3\u003e\n\u003cp\u003eThe mixing basket has a diameter of 80 mm.\u003c\/p\u003e\n\u003ch3\u003eCan the mixer be used with a drill?\u003c\/h3\u003e\n\u003cp\u003eThe mixer is intended for use with a suitable drill. The holder and permitted speed must be compatible with the device.\u003c\/p\u003e\n\u003ch3\u003eHow is the mixer cleaned?\u003c\/h3\u003e\n\u003cp\u003eClean it immediately after use with a cleaning agent suitable for paint or varnish.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"Default Title","offer_id":65834920903005,"sku":"944","price":2.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersoffice3desktopfarbrhrerjpg-11941413.jpg?v=1788722888"},{"product_id":"adapter-3-tlg-set-fuer-akkuschrauber","title":"Socket adapter set, 3-piece, 1\/4, 3\/8 and 1\/2-inch square drive","description":"\u003cp\u003eWith this three-piece socket adapter set, you can use compatible sockets with a 1\/4-inch hex shank, for example in a cordless drill. Each adapter has a hex shank on the drive side and an external square drive on the socket side. The set contains the three square-drive sizes 1\/4, 3\/8 and 1\/2 inch.\u003c\/p\u003e\n\u003ch2\u003eThree square-drive sizes\u003c\/h2\u003e\n\u003cp\u003eThe set includes one adapter each for 1\/4, 3\/8 and 1\/2-inch sockets. The socket must match the relevant square drive.\u003c\/p\u003e\n\u003ch2\u003eHex shank on the drive side\u003c\/h2\u003e\n\u003cp\u003eInsert the 1\/4-inch hex shank into a compatible bit holder or suitable chuck. Fit the appropriate socket onto the external square drive on the opposite side.\u003c\/p\u003e\n\u003ch2\u003eTool steel and lengths\u003c\/h2\u003e\n\u003cp\u003eThe adapters are made from hardened chrome vanadium tool steel. The 1\/4 and 3\/8-inch versions are 65 mm long; the 1\/2-inch version is 75 mm long.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSet contents:\u003c\/strong\u003e 3 adapters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hardened chrome vanadium tool steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHex shank:\u003c\/strong\u003e 1\/4 inch, 6.35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSocket side:\u003c\/strong\u003e 1\/4, 3\/8 and 1\/2-inch external square drive\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLengths:\u003c\/strong\u003e 65 mm for 1\/4 and 3\/8 inch; 75 mm for 1\/2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich square-drive sizes do the adapters have?\u003c\/h3\u003e\n\u003cp\u003eThe set contains one adapter each with a 1\/4, 3\/8 and 1\/2-inch external square drive.\u003c\/p\u003e\n\u003ch3\u003eAre sockets included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set contains three adapters. Compatible sockets are required separately.\u003c\/p\u003e\n\u003ch3\u003eWhat holder does the tool need?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/4-inch hex side must fit into a compatible bit holder or chuck. The appropriate socket fits onto the external square drive.\u003c\/p\u003e\n\u003ch3\u003eHow long are the adapters?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/4 and 3\/8-inch adapters are each 65 mm long; the 1\/2-inch adapter is 75 mm long.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"Default Title","offer_id":65834922541405,"sku":"958","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941486.jpg?v=1788722891"},{"product_id":"winkelbohrvorsatz-90-mit-schnellspann-bohrfutter","title":"90° right-angle drill attachment with keyless chuck","description":"\u003cp\u003eThe 90° right-angle drill attachment transfers rotary motion into tight corners and hard-to-reach working areas. Its keyless chuck accepts round-shank drill bits and suitable tools from 0.8 to 10 mm. The attachment fits into a suitable chuck or compatible quick-change holder via its 1\/4-inch hex shank.\u003c\/p\u003e\n\u003ch2\u003eDrilling and screwdriving in confined spaces\u003c\/h2\u003e\n\u003cp\u003eThe right-angle gearing provides extra access where a straight tool does not leave enough room. Ball-bearing guidance supports smooth running. Follow the relevant manufacturer specifications for the material, tool and drive machine, including the permitted speed.\u003c\/p\u003e\n\u003ch2\u003eChuck and design\u003c\/h2\u003e\n\u003cp\u003eThe keyless chuck can be operated without a separate tightening tool and covers diameters from 0.8 to 10 mm. The metal construction is 150 mm long and weighs 600 g.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAngle:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChuck:\u003c\/strong\u003e Keyless chuck, 0.8–10 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrive:\u003c\/strong\u003e 1\/4-inch hex shank, magnetic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 3000 rpm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGuidance:\u003c\/strong\u003e Ball bearing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 600 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich tools fit the chuck?\u003c\/h3\u003e\n\u003cp\u003eThe keyless chuck is designed for round-shank drill bits and suitable tools with diameters from 0.8 to 10 mm.\u003c\/p\u003e\n\u003ch3\u003eHow is the attachment fitted to the machine?\u003c\/h3\u003e\n\u003cp\u003eInsert the 1\/4-inch hex shank into a suitable chuck or compatible quick-change holder.\u003c\/p\u003e\n\u003ch3\u003eCan the attachment be used for drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. The chuck accepts tools up to 10 mm. For wood, metal or plastic, use suitable drill bits and appropriate working parameters.\u003c\/p\u003e\n\u003ch3\u003eWhat is the right-angle drill attachment suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for drilling and screwdriving in hard-to-reach areas. The tool, speed and material must suit the specific application.\u003c\/p\u003e","brand":"GRAPHITE","offers":[{"title":"Default Title","offer_id":65834956554589,"sku":"1749","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkelbohrvorsatzjpg-12403638.jpg?v=1788723507"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-kat-werkzeug-sq-750_adfb8c73-429f-4213-8915-96970df88410.jpg?v=1789138859","url":"https:\/\/brixoro.eu\/en-se\/collections\/drilling-tools-and-accessories.oembed","provider":"Brixoro","version":"1.0","type":"link"}