{"title":"Irrigation fittings \u0026 connectors","description":"\u003cp\u003eAn irrigation system only works with matching connections. Distinguish between threads, hose tails and coupling systems, and plan every connection point from the tap to the watering device.\u003c\/p\u003e\u003ch2\u003eIdentify each connection side separately\u003c\/h2\u003e\u003cp\u003eFor each connection point, note the two sides to be joined: hose, female thread, male thread or coupling. Add the exact size and system details for each. This makes it clear whether you need a direct connector or an adapter.\u003c\/p\u003e\u003ch2\u003eDo not mix coupling systems based on appearance\u003c\/h2\u003e\u003cp\u003eGarden push-fit systems, connections described as GEKA-compatible and Storz versions must be compared separately. Explicitly stated compatibility is what matters. Also check the seal and included components before putting together the complete connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnection type on both sides\u003c\/li\u003e\n\u003cli\u003eNominal size and thread type\u003c\/li\u003e\n\u003cli\u003eRequired seals or fixings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare a complete connection\u003c\/h2\u003e\u003cdiv class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Irrigation fittings \u0026amp; connectors: comparison 1\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eRequired information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThreaded connection\u003c\/td\u003e\n\u003ctd\u003eDesignation and female\/male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose tail\u003c\/td\u003e\n\u003ctd\u003eSpecified hose size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling side\u003c\/td\u003e\n\u003ctd\u003eSystem and specific size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eFor a branched line, the planned direction also matters at each connection. Starting from the water connection, draw all the connection points. Mark where a tap, manifold or watering device should go. Then compare only the parts that join those specific connection points. Include seals and fixings on the same list. A photograph shows the design but does not replace technical compatibility specifications.\u003c\/p\u003e\u003cp\u003eMore options: \u003ca href=\"\/en\/collections\/schlauchverbinder\"\u003eHose connectors \u0026amp; couplings\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/geka-kompatible-kupplungen\"\u003eGEKA-compatible couplings\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/storz-kupplungen\"\u003eStorz couplings \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSelection guides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/blogs\/ratgeber\/gartenschlauch-durchmesser-anschluesse\"\u003eUnderstanding hose sizes and thread sizes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/blogs\/ratgeber\/ibc-anschluss-adapter-auswaehlen\"\u003eIdentifying IBC connections and adapters\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"bradas-schlauchkupplung-1-zoll-power-jet-white-line","title":"Hose coupling 1 inch POWER JET – White Line – Bradas","description":"\u003cp\u003eThe Bradas POWER JET hose connector attaches to a compatible 1-inch hose and connects it on the appliance side to a POWER JET plug connection. The locking mechanism secures the plug connection, while the integrated rubber seal supports sealing.\u003c\/p\u003e\n\u003ch2\u003eHose side and plug socket\u003c\/h2\u003e\n\u003cp\u003eThe connector attaches to a compatible 1-inch hose. On the appliance side, it has a POWER JET plug socket.\u003c\/p\u003e\n\u003ch2\u003eLocking mechanism and seal\u003c\/h2\u003e\n\u003cp\u003eThe locking mechanism holds the compatible POWER JET plug in the socket. The integrated rubber seal supports sealing when the connection is clean, compatible and undamaged.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e POWER JET\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine:\u003c\/strong\u003e White Line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose size:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug system:\u003c\/strong\u003e POWER JET\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Hose connector with locking mechanism\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated rubber seal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e Tool-free connection and disconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes 1 inch refer to a thread?\u003c\/h3\u003e\n\u003cp\u003e1 inch refers to the compatible hose size. On the appliance side, the connector has a POWER JET plug connection.\u003c\/p\u003e\n\u003ch3\u003eWhat does the locking mechanism hold?\u003c\/h3\u003e\n\u003cp\u003eIt secures the compatible POWER JET plug in the socket.\u003c\/p\u003e\n\u003ch3\u003eWhat supports sealing?\u003c\/h3\u003e\n\u003cp\u003eThe integrated rubber seal supports sealing when the connection is clean, compatible and undamaged.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64338222940509,"sku":"1626","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchkupplung-pvcjpg-11821655.jpg?v=1777033959"},{"product_id":"storz-schlauchkupplung-tuelle-lang-genormtes-storz-system","title":"Storz hose coupling with long hose tail – Bradas","description":"\u003cp\u003eThe Bradas Storz coupling with a long hose tail is used to connect flexible hoses to a coupling of the same size. The tail provides additional insertion length for securing the hose with a suitable clamp or hose clamp. The symmetrical plug-in system is closed by inserting and twisting.\u003c\/p\u003e\n\u003ch2\u003eLong hose tail for flexible hoses\u003c\/h2\u003e\n\u003cp\u003eThe tail is inserted into the hose and then secured with a suitable hose clamp or clamp. This version is suitable for hose lines without a threaded connection.\u003c\/p\u003e\n\u003ch2\u003eChoose the correct size\u003c\/h2\u003e\n\u003cp\u003eThe versions correspond to Storz sizes A, B, C and D. When purchasing, the mating Storz connection and hose receptacle must match the existing line.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Storz, symmetrical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Long hose tail\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e A, B, C and D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection method:\u003c\/strong\u003e Symmetrical coupling locked by twisting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSurface:\u003c\/strong\u003e Corrosion-resistant treated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push the hose on and secure it with a hose clamp or clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eSize\u003c\/th\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003cth\u003eTail length\u003c\/th\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eA\u003c\/td\u003e\u003ctd\u003e4 inches\u003c\/td\u003e\u003ctd\u003e138 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eB\u003c\/td\u003e\u003ctd\u003e3 inches\u003c\/td\u003e\u003ctd\u003e100 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eC\u003c\/td\u003e\u003ctd\u003e2 inches\u003c\/td\u003e\u003ctd\u003e65 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eD\u003c\/td\u003e\u003ctd\u003e1 inch\u003c\/td\u003e\u003ctd\u003e42 mm\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the hose tail secured to the hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose is pushed over the tail and secured with a suitable clamp or hose clamp.\u003c\/p\u003e\n\u003ch3\u003eWhich connections must match when purchasing?\u003c\/h3\u003e\n\u003cp\u003eThe mating Storz connection must match the coupling size. The tail must also be suitable for the hose\u0026#x27;s internal diameter.\u003c\/p\u003e\n\u003ch3\u003eWhat is the purpose of the long hose tail?\u003c\/h3\u003e\n\u003cp\u003eIt provides a longer insertion surface for the hose and its fastening.\u003c\/p\u003e\n\u003ch3\u003eWhich sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe coupling is available in sizes A, B, C and D.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"D Coupling Hose Tail 42mm","offer_id":64594606686557,"sku":"1099-0001","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"C Coupling Hose Tail 65mm","offer_id":64595126419805,"sku":"1099-0002","price":5.49,"currency_code":"EUR","in_stock":true},{"title":"B Coupling Hose Tail 100mm","offer_id":64595126452573,"sku":"1099-0003","price":8.49,"currency_code":"EUR","in_stock":true},{"title":"A Coupling Hose Tail 138mm","offer_id":64595126518109,"sku":"1099-0004","price":23.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/storz-schlauchkupplungjpg-11941548.jpg?v=1777921352"},{"product_id":"bradas-geka-kompatibler-auslaufhahn-aus-vernickeltem-messing-pn-10-1-2-oder-3-4-zoll","title":"GEKA-compatible nickel-plated brass tap, PN 10, 1\/2 or 3\/4 inch – Bradas","description":"\u003cp\u003eThis nickel-plated brass tap is suitable for water connections on water butts, in gardens, in agriculture and in commercial environments. The model is GEKA-compatible and is available with either a 1\/2-inch or 3\/4-inch male thread, depending on the version. The pressure rating is PN 10.\u003c\/p\u003e\n\u003ch2\u003eConnection and version\u003c\/h2\u003e\n\u003cp\u003eChoose the thread size to match the existing connection. Depending on the version, the male thread is 1\/2 or 3\/4 inch; a suitable hose union is included with the relevant version. A GEKA-compatible coupling system is used for the connection.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe tap is intended for outdoor water connections, water butts and irrigation systems. The specified temperature range is from −10 °C to +110 °C. Before periods of frost, drain the tap to prevent standing water from freezing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel-plated brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e GEKA-compatible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/2 or 3\/4 inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure rating:\u003c\/strong\u003e PN 10\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e −10 °C to +110 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of supply:\u003c\/strong\u003e Tap with suitable hose union for each version\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich thread sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe tap is available with a 1\/2-inch or 3\/4-inch male thread. Choose the version that matches your connection.\u003c\/p\u003e\n\u003ch3\u003eWhich couplings fit the tap?\u003c\/h3\u003e\n\u003cp\u003eThe tap is intended for GEKA-compatible couplings.\u003c\/p\u003e\n\u003ch3\u003eCan the tap be used on a water butt?\u003c\/h3\u003e\n\u003cp\u003eYes, the tap is suitable for drawing water from a water butt provided the thread and installation conditions match.\u003c\/p\u003e\n\u003ch3\u003eWhat is the tap made of?\u003c\/h3\u003e\n\u003cp\u003eThe tap is made of nickel-plated brass.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"3\/4 inch","offer_id":64595124912477,"sku":"GKK033419","price":6.49,"currency_code":"EUR","in_stock":true},{"title":"1\/2 inch","offer_id":64594606981469,"sku":"GKK031213","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/1424676jpg-11941739.jpg?v=1777921695"},{"product_id":"bradas-t-stueckverteiler-fuer-tropf-und-perlschlaeuche-aussengewinde","title":"T-Piece Distributor for Drip and Soaker Hoses, Male Thread – Bradas","description":"\u003cp\u003eThe T-piece distributor divides an irrigation line in two directions, making it suitable for building or extending drip and soaker hose systems. The one-piece design has three connections. Depending on hose diameter and mating part, variants are available for 16 mm, 20 mm or 25 mm and with 1\/2- or 3\/4-inch male thread.\u003c\/p\u003e\n\u003ch2\u003eT-Junction in an Irrigation System\u003c\/h2\u003e\n\u003cp\u003eThe component continues a main line into two branches, for example to two bed areas or an additional row of plants. For a straight extension without a branch, a straight push-fit connector is the suitable design.\u003c\/p\u003e\n\u003ch2\u003eSize and Installation\u003c\/h2\u003e\n\u003cp\u003eMeasure the hose diameter and check the female thread of the mating part before selecting a variant. The connection is made as a push-fit connection and can be installed without specialist tools.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e T-piece with 3 connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Drip hoses and soaker hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose diameter:\u003c\/strong\u003e 16 mm, 20 mm or 25 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/2-inch or 3\/4-inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacture:\u003c\/strong\u003e One-piece, made as a single component\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push-fit connection, tool-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 5 versions: 16 mm with 1\/2 inch, 20 mm with 1\/2 inch, 20 mm with 3\/4 inch, 25 mm with 1\/2 inch and 25 mm with 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I choose the right version?\u003c\/h3\u003e\n\u003cp\u003eChoose according to the hose diameter of 16 mm, 20 mm or 25 mm and the required male thread of 1\/2 or 3\/4 inch.\u003c\/p\u003e\n\u003ch3\u003eWhat is a T-piece distributor used for?\u003c\/h3\u003e\n\u003cp\u003eIt divides an irrigation line in two directions, for example to supply two bed areas.\u003c\/p\u003e\n\u003ch3\u003eAre tools required for installation?\u003c\/h3\u003e\n\u003cp\u003eNo. The hose connections are installed as push-fit connections.\u003c\/p\u003e\n\u003ch3\u003eIs this component intended for standard garden hoses?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for drip and soaker hoses. Use suitable hose couplings for standard garden hoses.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"25mm 1\/2\"","offer_id":64595133825373,"sku":"1282-251\/2","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"25mm 3\/4\"","offer_id":64595133890909,"sku":"1282-253\/4","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"16mm 1\/2\"","offer_id":64594608128349,"sku":"1282-161\/2","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"20mm 1\/2\"","offer_id":64595133727069,"sku":"1282-201\/2","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"20mm 3\/4\"","offer_id":64595133759837,"sku":"1282-203\/4","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941938.jpg?v=1777922027"},{"product_id":"steckverbinder-16-25-mm-aussengewinde","title":"Push-Fit Connector for Drip and Soaker Hoses, Male Thread – Bradas","description":"\u003cp\u003eThe one-piece Bradas push-fit connector joins drip or soaker hoses to a fitting with a female thread. It is available in five combinations: 16 mm with 1\/2 or 3\/4 inch, 20 mm with 1\/2 or 3\/4 inch, and 25 mm with 1 inch. Choose the version to match the hose and the female thread of the mating part.\u003c\/p\u003e\n\u003ch2\u003eStraight Threaded Connection\u003c\/h2\u003e\n\u003cp\u003ePush the hose onto the ribbed push-fit end and screw the threaded end into a suitable female thread. The connector is manufactured as a single component.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Version\u003c\/h2\u003e\n\u003cp\u003eChoose exactly between 16 mm × 1\/2 inch, 16 mm × 3\/4 inch, 20 mm × 1\/2 inch, 20 mm × 3\/4 inch and 25 mm × 1 inch. The hose size and the mating thread must match.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece straight push-fit connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Drip and soaker hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 16 mm × 1\/2 inch; 16 mm × 3\/4 inch; 20 mm × 1\/2 inch; 20 mm × 3\/4 inch; 25 mm × 1 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push on the hose and screw in the thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hose sizes is the connector designed for?\u003c\/h3\u003e\n\u003cp\u003eThe options are 16 mm × 1\/2 inch, 16 mm × 3\/4 inch, 20 mm × 1\/2 inch, 20 mm × 3\/4 inch and 25 mm × 1 inch.\u003c\/p\u003e\n\u003ch3\u003eHow are the hose and fitting connected?\u003c\/h3\u003e\n\u003cp\u003ePush the hose over the ribbed barb. Screw the male thread on the other side into a suitable female thread.\u003c\/p\u003e\n\u003ch3\u003eWhich dimensions must match before purchase?\u003c\/h3\u003e\n\u003cp\u003eChoose the barb to match the hose and the male thread to match the fitting’s female thread size.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"20mm 3\/4\"","offer_id":64595134284125,"sku":"1284-203\/4","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"25mm 1\"","offer_id":64595134316893,"sku":"1284-251","price":0.49,"currency_code":"EUR","in_stock":false},{"title":"16mm 1\/2\"","offer_id":64594609373533,"sku":"1284-161\/2","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"16mm 3\/4\"","offer_id":64595133956445,"sku":"1284-163\/4","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"20mm 1\/2\"","offer_id":64595133989213,"sku":"1284-201\/2","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/auengewinde-steckverbinderjpg-11942014.jpg?v=1777922039"},{"product_id":"bradas-schlauchverbinder-1-zoll-dn25-mit-tuellen","title":"1-inch DN25 hose connector with hose tails – Bradas","description":"\u003cp\u003eThe Bradas hose connector joins two 1-inch garden hoses with DN25 or 25 mm internal diameter. Insert the hose tails on both sides into the hose ends; circumferential profile ribs help grip the inside of the hose wall. The component is suitable for extending a line and repairing damaged hose sections.\u003c\/p\u003e\n\u003ch2\u003eInstalling the hose-tail connection\u003c\/h2\u003e\n\u003cp\u003eCut the undamaged hose ends square and push them fully over the hose tails. If required, warm water makes fitting easier. Secure each hose side with a clamp suited to the hose’s outside size, particularly for pump operation and permanent installations.\u003c\/p\u003e\n\u003ch2\u003eMaterial and connection size\u003c\/h2\u003e\n\u003cp\u003eThe connector is made from impact-resistant PVC and designed for 1-inch hoses. It is a push-fit hose-tail connector and is not intended for a click-fit coupling system. The stated rating is up to approximately 8 bar working pressure.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 1-inch hose tail on both sides for DN25 \/ 25 mm hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection type:\u003c\/strong\u003e Push-fit hose-tail connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant PVC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProfile:\u003c\/strong\u003e Circumferential anti-slip profile ribs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push on without tools; hose clamp recommended\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e Stated up to approximately 8 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange \/ grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Hose extension and repair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e UV- and weather-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hoses fit this connector?\u003c\/h3\u003e\n\u003cp\u003eThe connector is designed for two 1-inch hoses with DN25 or 25 mm internal diameter.\u003c\/p\u003e\n\u003ch3\u003eHow is the connector installed?\u003c\/h3\u003e\n\u003cp\u003eCut the hose ends cleanly and square, then push them onto both hose tails. If required, warm water can make fitting easier.\u003c\/p\u003e\n\u003ch3\u003eIs a hose clamp required?\u003c\/h3\u003e\n\u003cp\u003eAdditional suitable clamps are particularly recommended for pump systems and permanent installations. Secure both sides separately. Check the connection for leaks and secure seating before use.\u003c\/p\u003e\n\u003ch3\u003eDoes the connector fit a 3\/4-inch hose?\u003c\/h3\u003e\n\u003cp\u003eNo. Both sides are designed for 1-inch hoses. A suitable reducing connector is required for different hose sizes.\u003c\/p\u003e\n\u003ch3\u003eIs the connector intended for a click system?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a push-fit hose-tail connector, not a click coupling.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595042730333,"sku":"324","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940473.jpg?v=1777919974"},{"product_id":"bradas-hahnanschluss-34-zoll-mit-12-zoll-reduzierung","title":"Tap Connector ¾ Inch with ½-Inch Reducer – Bradas","description":"\u003cp\u003eThe Bradas tap connector has a 3\/4-inch female thread with a removable 1\/2-inch reducing ring. It connects a compatible tap to a hose coupling from a compatible click system. The body is made from orange and grey PP plastic.\u003c\/p\u003e\n\u003ch2\u003eTwo thread sizes\u003c\/h2\u003e\n\u003cp\u003eFor a tap with a ½-inch male thread, leave the reducing ring in place. For a ¾-inch male thread, remove it. Position the connector straight and tighten it by hand. The rubber ring seals against the end face of the tap connector; do not overtighten the plastic thread with pliers.\u003c\/p\u003e\n\u003ch2\u003eClick connection for the hose\u003c\/h2\u003e\n\u003cp\u003ePush a suitable standard garden hose coupling onto the plug until it clicks into place. The orange and grey body is made from glass-fibre-reinforced PP plastic with UV and impact resistance. Before frost, remove and empty the connector and reducing ring, then store them in a frost-free place.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/4-inch female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReducing ring:\u003c\/strong\u003e 1\/2 inch, removable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Glass-fibre-reinforced PP (polypropylene)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling:\u003c\/strong\u003e Plug for standard garden hose couplings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Rubber internal ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange\/grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free, by hand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the connector used with a 1\/2-inch tap?\u003c\/h3\u003e\n\u003cp\u003eLeave the 1\/2-inch reducing ring in place and screw the connector hand-tight onto the matching male thread.\u003c\/p\u003e\n\u003ch3\u003eWhen should the reducing ring be removed?\u003c\/h3\u003e\n\u003cp\u003eFor a 3\/4-inch male thread, unscrew the reducing ring so that the connector fits directly onto the larger thread.\u003c\/p\u003e\n\u003ch3\u003eIs a sealing ring included?\u003c\/h3\u003e\n\u003cp\u003eYes, a rubber ring seals the connection. If it drips, first turn off the water and check the seal and sealing surfaces for dirt, damage and correct seating. Replace a damaged seal; additional thread-sealing tape is normally not required for this flat-sealing connection.\u003c\/p\u003e\n\u003ch3\u003eWhich hose connector is required?\u003c\/h3\u003e\n\u003cp\u003eA standard garden hose coupling that matches the plug. Push it on until it clicks into place. The hose diameter determines the coupling on the hose side and is not the same as the tap thread size.\u003c\/p\u003e\n\u003ch3\u003eHow can I identify my tap thread size?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameter of the tap’s male thread: a ¾-inch pipe thread measures approximately 26.4 mm, while a ½-inch pipe thread measures approximately 21 mm. The inch designation does not correspond to the directly measured diameter in inches.\u003c\/p\u003e\n\u003ch3\u003eCan the connector remain fitted over winter?\u003c\/h3\u003e\n\u003cp\u003eRemove it before the first frost, empty it completely and store it in a frost-free place. Freezing residual water can damage the body or sealing surfaces.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595048890717,"sku":"216","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/hahnanschluss-11940434_a5694577-12c2-4976-a7c5-221d475aac67.jpg?v=1780575431"},{"product_id":"reduzier-verbinder-1-2-3-4-bradas-auf","title":"Reducing connector GL5708 1\/2 to 3\/4 inch – Bradas","description":"\u003cp\u003eThe Bradas GL5708 Gold Line connects a 1\/2-inch hose to a 3\/4-inch hose. Its design has two different-sized connection sides with orange union nuts. Insert the hose ends and clamp them with the nuts. The reducing hose connector is suitable for assembling or repairing an irrigation line when two hose diameters need to be joined.\u003c\/p\u003e\n\u003ch2\u003eConnect two hose sizes\u003c\/h2\u003e\n\u003cp\u003eThe two connection sides are designed for 1\/2 and 3\/4 inch. Cut the hose ends cleanly and straight, insert them fully and tighten the union nuts by hand. Check the connection before turning on the water.\u003c\/p\u003e\n\u003ch2\u003ePlastic screw-clamp connection\u003c\/h2\u003e\n\u003cp\u003eThe GL5708 is a plastic reducing hose connector with union nuts. It is not a click coupling and has no water-stop function. The clamping design is intended for irrigation and sprinkler lines using the stated hose sizes.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bradas Gold Line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e GL5708\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\/2 inch and 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Screw-clamp reducing hose connector with union nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hose sizes does the GL5708 connect?\u003c\/h3\u003e\n\u003cp\u003eIt connects 1\/2-inch and 3\/4-inch hose.\u003c\/p\u003e\n\u003ch3\u003eIs the GL5708 a quick coupling?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a plastic reducing hose connector with union nuts, not a click coupling.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595051053405,"sku":"GL5708","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940443_15701ef7-28ef-4bb2-b2ed-0d5aeda39997.jpg?v=1780651120"},{"product_id":"geka-kompatible-messing-klauenkupplung-1-2-zoll","title":"GEKA-Compatible Brass Claw Coupling 1\/2 Inch","description":"\u003cp\u003eThe GEKA-compatible claw coupling has a ribbed 1\/2-inch hose tail, a brass housing and an NBR seal. Two compatible coupling parts are joined by engaging their claws and locking them with a quarter turn. The hose tail is secured with a suitable hose clamp or ferrule.\u003c\/p\u003e\n\u003ch2\u003eHose and mating part\u003c\/h2\u003e\n\u003cp\u003eThe hose tail is specified for a hose with an internal diameter of approximately 13 mm. The decisive factors are the hose-tail geometry, hose wall and the actual claw profile used.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e GEKA-compatible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose size:\u003c\/strong\u003e 1\/2 inch, approximately 13 mm internal diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocking:\u003c\/strong\u003e Claw profile, quarter turn\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose tail:\u003c\/strong\u003e Ribbed profile\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e NBR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hose clamp or ferrule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hose size fits?\u003c\/h3\u003e\n\u003cp\u003eThe hose tail is designed for 1\/2-inch hoses with an internal diameter of approximately 13 mm; the hose-tail geometry must match the hose.\u003c\/p\u003e\n\u003ch3\u003eHow is the coupling connected?\u003c\/h3\u003e\n\u003cp\u003eCompatible coupling parts are joined using their claws and locked with a quarter turn.\u003c\/p\u003e\n\u003ch3\u003eHow is the hose tail secured?\u003c\/h3\u003e\n\u003cp\u003eWith a hose clamp or ferrule suitable for the hose construction.\u003c\/p\u003e\n\u003ch3\u003eWhat is important for maintenance and winter storage?\u003c\/h3\u003e\n\u003cp\u003eBefore freezing weather, depressurise the system, drain it completely and store it in a frost-free place. Check the seal for damage and maintain it only with approved products.\u003c\/p\u003e\n\u003ch3\u003eDoes the coupling connect directly to a click plug-in system?\u003c\/h3\u003e\n\u003cp\u003eNo. Claw couplings and click plug-in couplings have different connection geometries. A suitable adapter is required.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595051938141,"sku":"298","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940461.jpg?v=1777919938"},{"product_id":"geka-kompatible-klauenkupplung-3-4-zoll-19-mm","title":"GEKA-Compatible Claw Coupling 3\/4 Inch, 19 mm","description":"\u003cp\u003eThe GEKA-compatible brass claw coupling has a ribbed hose tail for hoses with a 19 mm internal diameter. On the coupling side, it connects by twisting it together with a compatible claw coupling. On the hose side, it is secured with a suitable hose clamp or ferrule.\u003c\/p\u003e\n\u003ch2\u003eClaw connection for quick changes\u003c\/h2\u003e\n\u003cp\u003eTwo compatible claw couplings are engaged and connected with a quarter turn. The connection locks at the coupling point without additional tools.\u003c\/p\u003e\n\u003ch2\u003eHose-side fastening\u003c\/h2\u003e\n\u003cp\u003eThe ribbed hose tail is inserted into a hose with a 19 mm internal diameter. Depending on the application, a suitable hose clamp or ferrule is used to secure it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e GEKA-compatible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose size:\u003c\/strong\u003e 3\/4 inch, 19 mm internal diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocking:\u003c\/strong\u003e Claw locking by twisting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e Ribbed hose tail\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e NBR internal seal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hose clamp or ferrule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hose is the coupling suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe hose tail is designed for hoses measuring 3\/4 inch or 19 mm in internal diameter.\u003c\/p\u003e\n\u003ch3\u003eHow is the claw coupling connected?\u003c\/h3\u003e\n\u003cp\u003eCompatible claws are engaged and locked with a quarter turn.\u003c\/p\u003e\n\u003ch3\u003eHow is the hose tail secured to the hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose tail is inserted into the hose and secured with a suitable hose clamp or ferrule.\u003c\/p\u003e\n\u003ch3\u003eCan the coupling be combined with a click plug-in system?\u003c\/h3\u003e\n\u003cp\u003eNot directly. A suitable adapter is required to connect to another coupling system.\u003c\/p\u003e\n\u003ch3\u003eHow should the coupling be stored over winter?\u003c\/h3\u003e\n\u003cp\u003eDepressurise before frost, drain completely and store in a frost-free place. Check the seal for wear and maintain it only with products approved for the sealing material.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595051970909,"sku":"299","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940461.jpg?v=1777919938"},{"product_id":"schnellkupplung-1-25-mm-bradas-tuelle","title":"Brass quick coupling 1 inch with 25 mm hose tail – Bradas","description":"\u003cp\u003eThe Bradas brass quick coupling connects a water hose with a 25 mm internal diameter to a GEKA-compatible two-claw connection. The ribbed hose tail is secured to the hose using a suitable hose clamp or crimp sleeve.\u003c\/p\u003e\n\u003ch2\u003eHose tail for 25 mm hoses\u003c\/h2\u003e\n\u003cp\u003eThe Christmas-tree ribbed profile sits inside the hose. A hose clamp or crimp sleeve suitable for the hose construction is used for fastening.\u003c\/p\u003e\n\u003ch2\u003eTwo-claw connection\u003c\/h2\u003e\n\u003cp\u003eThe GEKA-compatible connection is joined to a matching counterpart. The NBR seal supports sealing of the connection.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose side:\u003c\/strong\u003e Hose tail for 1 inch or 25 mm internal diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProfile:\u003c\/strong\u003e Christmas-tree ribbed profile\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling side:\u003c\/strong\u003e GEKA-compatible two-claw connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e NBR rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Hose clamp or crimp sleeve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hose is the hose tail designed for?\u003c\/h3\u003e\n\u003cp\u003eFor a flexible water hose with a 25 mm internal diameter. The hose must also be secured with a suitable clamp or crimp sleeve.\u003c\/p\u003e\n\u003ch3\u003eCan I use a hose clamp or a crimp sleeve?\u003c\/h3\u003e\n\u003cp\u003eYes. The hose clamp is removable and can be retightened, while the crimp sleeve is intended for a permanent crimped connection.\u003c\/p\u003e\n\u003ch3\u003eDoes the coupling fit every click system?\u003c\/h3\u003e\n\u003cp\u003eNo. It is designed for a GEKA-compatible two-claw connection. Other click systems may have different geometry.\u003c\/p\u003e\n\u003ch3\u003eWhat seal is fitted?\u003c\/h3\u003e\n\u003cp\u003eThe coupling has an NBR rubber seal. If it becomes worn, it should be replaced with a suitable spare part with the same geometry.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595052003677,"sku":"301","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940461.jpg?v=1777919938"},{"product_id":"bradas-innengewindestueck-1-zoll-geka-kompatibel-messing","title":"1-inch female-thread adapter, GEKA-compatible, brass – Bradas","description":"\u003cp\u003eThe Bradas female-thread adapter connects a component with a 1-inch male thread to a GEKA-compatible claw coupling. The brass body is suitable for pumps, domestic waterworks, manifolds and larger irrigation pipes, provided that the connection size and thread match. Suitable hose and irrigation components can be changed quickly via the claw coupling.\u003c\/p\u003e\n\u003ch2\u003eFor larger water connections\u003c\/h2\u003e\n\u003cp\u003eThe cylindrical G-1 female thread is designed for a compatible 1-inch male thread. The DN25 designation refers to the nominal connection size; actual flow performance depends on the complete pipe system.\u003c\/p\u003e\n\u003ch2\u003eQuick coupling with NBR seal\u003c\/h2\u003e\n\u003cp\u003eThe other side has a GEKA-compatible claw connection with an NBR seal. After installing the threaded side, suitable mating components can be changed without repeatedly unscrewing the connection.\u003c\/p\u003e\n\u003ch2\u003ePressure and care\u003c\/h2\u003e\n\u003cp\u003eObserve the stated continuous pressure of approximately 8 bar. The burst pressure of approximately 10 bar is not an operating approval. Depressurise the pipe before uncoupling. Drain completely for winter storage and follow the installation instructions for the tap or pump.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1-inch female thread, DN25\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread standard:\u003c\/strong\u003e G 1, cylindrical, according to DIN ISO 228\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling side:\u003c\/strong\u003e GEKA-compatible claw connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e NBR rubber seal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sealing:\u003c\/strong\u003e Hemp with sealing paste or PTFE tape\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTypical applications:\u003c\/strong\u003e Pumps, domestic waterworks, manifolds and irrigation pipes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContinuous pressure:\u003c\/strong\u003e Approx. 8 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBurst pressure:\u003c\/strong\u003e Approx. 10 bar; not an allowable operating pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connection does the adapter fit?\u003c\/h3\u003e\n\u003cp\u003eThe adapter fits a corresponding G-1 male thread. Its external diameter is approximately 33.3 mm. The connection type and operating conditions of the pump or manifold must also be suitable.\u003c\/p\u003e\n\u003ch3\u003eWhat connection is on the coupling side?\u003c\/h3\u003e\n\u003cp\u003eThe coupling side is a GEKA-compatible claw connection with an NBR seal.\u003c\/p\u003e\n\u003ch3\u003eCan the adapter be used with a garden pump?\u003c\/h3\u003e\n\u003cp\u003eYes, provided that the pump has a compatible 1-inch male thread and the operating conditions are suitable for the adapter.\u003c\/p\u003e\n\u003ch3\u003eHow is the female thread sealed?\u003c\/h3\u003e\n\u003cp\u003eHemp with sealing paste or PTFE tape is suitable for the threaded side. The specific installation depends on the mating component and system.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595052069213,"sku":"304","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tsclientcusersstevedesktopgeka-innengewindejpg-11940466.jpg?v=1777919949"},{"product_id":"bradas-messing-klauenkupplung-1-zoll-aussengewinde-geka-kompatibel","title":"Brass claw coupling with 1-inch male thread, GEKA-compatible – Bradas","description":"\u003cp\u003eBradas’s 1-inch male-threaded fitting connects to a matching female-threaded outlet and provides a GEKA-compatible claw system. The brass body is suitable for larger taps, distribution manifolds and pump outlets designed for a 1-inch connection. The claw connection allows matching hose plugs to be connected quickly; an NBR sealing ring supports the seal.\u003c\/p\u003e\n\u003ch2\u003eFor larger connections\u003c\/h2\u003e\n\u003cp\u003eThe 1-inch male thread requires a matching female thread. The inch specification refers to the nominal thread size; it does not indicate a clear internal diameter of exactly 25.4 mm. The available flow rate depends on the complete pipework and delivery capacity.\u003c\/p\u003e\n\u003ch2\u003eGEKA-compatible outdoor connection\u003c\/h2\u003e\n\u003cp\u003eThe brass body and GEKA-compatible claw connection are intended for outdoor irrigation lines. Drain the connection before frost. Reducing it to smaller connections requires a suitable adapter.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eConnection thread:\u003c\/strong\u003e 1-inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e GEKA-compatible claw connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSealing ring:\u003c\/strong\u003e NBR rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInternal passage:\u003c\/strong\u003e Designed for a 1-inch connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Larger taps, distributors, pump outlets and irrigation systems\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Tool-free coupling via two claws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhen is a 1-inch connection required?\u003c\/h3\u003e\n\u003cp\u003eWhen the existing tap, distributor or pump outlet has a 1-inch female thread. A suitable smaller version is required for a typical 3\/4-inch connection.\u003c\/p\u003e\n\u003ch3\u003eCan the connection be reduced to 3\/4 inch?\u003c\/h3\u003e\n\u003cp\u003eThis is possible with a suitable reducing adapter. The adapter's thread and claw connection must match the existing counterparts.\u003c\/p\u003e\n\u003ch3\u003eHow is the thread sealed?\u003c\/h3\u003e\n\u003cp\u003eDepending on the counterpart, a suitable thread sealant such as PTFE tape or hemp with sealing paste may be required. The sealing surfaces of the specific connection are decisive.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider in frost?\u003c\/h3\u003e\n\u003cp\u003eRemove the connection before frost and drain it completely. Freezing residual water can damage both the brass body and the seal. Check the sealing ring before refitting.\u003c\/p\u003e\n\u003ch3\u003eWhich GEKA components fit?\u003c\/h3\u003e\n\u003cp\u003eHose plugs and accessories with a matching GEKA-compatible claw system are intended. The seal depends on the condition and dimensional accuracy of all connected parts.\u003c\/p\u003e\n\u003ch3\u003eHow do I disconnect the claw coupling?\u003c\/h3\u003e\n\u003cp\u003eFirst shut off the water supply and depressurise the line. Press and turn the coupling halves against each other until the claws disengage. There is no claw ring to pull back.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595054428509,"sku":"322","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940467.jpg?v=1777919954"},{"product_id":"schlauchverbinder-1-2-bradas-von","title":"Double connector GL5804 Gold Line for couplings – Bradas","description":"\u003cp\u003eThe Bradas GL5804 Gold Line is a nipple for connecting two compatible quick couplings. It is inserted between two couplings to create a detachable connection within the irrigation system. The part is intended for coupling-to-coupling connections, not for sliding directly onto two bare hose ends.\u003c\/p\u003e\n\u003ch2\u003eConnect two couplings\u003c\/h2\u003e\n\u003cp\u003eInsert the double connector fully into both matching quick couplings. Check that it is seated correctly before opening the tap. To modify the system, the connection can be released again once the line is depressurised.\u003c\/p\u003e\n\u003ch2\u003eGold Line plastic nipple\u003c\/h2\u003e\n\u003cp\u003eThe GL5804 is made from plastic and belongs to the Gold Line range. The nipple has no water-stop function and no direct hose tail. Both mating couplings must be compatible with the plug-in system.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bradas Gold Line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e GL5804\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Nipple or double connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection function:\u003c\/strong\u003e Connects two compatible quick couplings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the GL5804 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to connect two matching quick couplings in an irrigation system.\u003c\/p\u003e\n\u003ch3\u003eCan I use it to connect two bare hoses directly?\u003c\/h3\u003e\n\u003cp\u003eNo. The GL5804 is a double connector for couplings; bare hose ends require a suitable hose repair connector.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595054887261,"sku":"GL5804","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940598.jpg?v=1777920060"},{"product_id":"messing-schlauchkupplung-32-mm-1-1-4-zoll-geka-kompatibel","title":"Brass hose coupling 32 mm (1 1\/4 inch), GEKA-compatible","description":"\u003cp\u003eThe GEKA-compatible quick coupling with brass hose tail is designed for hoses with a 32 mm internal diameter or 1 1\/4 inch. The ribbed profile supports a secure hose fit; use a hose clamp or press sleeve for fastening.\u003c\/p\u003e\n\u003ch2\u003eMaterial and hose connection\u003c\/h2\u003e\n\u003cp\u003eThe hose-tail body is made from solid brass. The tail is designed for hoses with a 32 mm internal diameter; 1 1\/4 inch corresponds here to a 32 mm hose internal diameter.\u003c\/p\u003e\n\u003ch2\u003eRibbed profile and fastening\u003c\/h2\u003e\n\u003cp\u003eThe ribbed profile supports the fit of the hose pushed onto it. Secure the hose with a suitable hose clamp or press sleeve.\u003c\/p\u003e\n\u003ch2\u003eCoupling and limits of use\u003c\/h2\u003e\n\u003cp\u003eTo connect, bring the claws of two matching couplings together and turn the couplings against each other. Before connecting, check seals and sealing surfaces for dirt or damage. Depressurise the connection before disconnecting.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e GEKA-compatible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eComponent:\u003c\/strong\u003e Quick coupling with hose tail\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Solid brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose size:\u003c\/strong\u003e 1 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose internal diameter:\u003c\/strong\u003e 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProfile:\u003c\/strong\u003e Ribbed profile\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Hose clamp or press sleeve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling:\u003c\/strong\u003e Connect GEKA claws by bringing them together and turning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill a hose with a 32 mm outside diameter fit?\u003c\/h3\u003e\n\u003cp\u003eThe internal diameter is decisive: the tail is intended for 32 mm internal diameter or hose size 1 1\/4 inch. The outside diameter is additionally required to select a suitable hose clamp.\u003c\/p\u003e\n\u003ch3\u003eHow do I secure the hose to the tail?\u003c\/h3\u003e\n\u003cp\u003ePush the suitable hose fully over the ribbed profile and secure it with an appropriate hose clamp or press sleeve. The fastening must suit the hose material, wall thickness and operating pressure.\u003c\/p\u003e\n\u003ch3\u003eHow are the coupling halves connected and disconnected?\u003c\/h3\u003e\n\u003cp\u003eBring the matching claws together and turn the couplings against each other. To disconnect, first close the water supply and release the pressure, then turn the couplings back.\u003c\/p\u003e\n\u003ch3\u003eWhat operating pressure may I use?\u003c\/h3\u003e\n\u003cp\u003eNo reliable pressure rating is available for this version. Before using it under pressure, establish the permissible values for the coupling, hose and fastening; the lowest value limits the connection.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595055706461,"sku":"482","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940663.jpg?v=1777920269"},{"product_id":"y-verteiler-fuer-gartenschlaeuche-mit-zwei-regelbaren-abgaengen","title":"Y-splitter for garden hoses with two adjustable outlets","description":"\u003cp\u003eThe Y-splitter divides one tap connection into two separately controlled outlets. Each outlet is opened or closed with its own rotary lever. This allows, for example, a garden hose and a second irrigation line to remain connected without refitting them for every changeover.\u003c\/p\u003e\n\u003ch2\u003eControl two outlets independently\u003c\/h2\u003e\n\u003cp\u003eEach outlet can be shut off and adjusted continuously using its rotary lever. Both can be open at the same time. The available water is divided between the connected outlets; the pressure does not automatically halve. Line lengths and water demand affect the supply.\u003c\/p\u003e\n\u003ch2\u003eConnection with 1\/2- and 3\/4-inch threads\u003c\/h2\u003e\n\u003cp\u003eThe valve has a 1\/2-inch female thread and a screw-on 3\/4-inch adapter. Actual compatibility depends on the male thread and design of the existing tap.\u003c\/p\u003e\n\u003ch2\u003eFor irrigation lines\u003c\/h2\u003e\n\u003cp\u003eThe two outlets are intended for hoses or irrigation lines. The matching click connectors must fit the relevant hose coupling.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Y-splitter, 2-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTap connection:\u003c\/strong\u003e 1\/2-inch female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdapter:\u003c\/strong\u003e 3\/4 inch to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2, separately adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e One rotary lever per outlet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e Rubber O-rings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1\/2-inch click connection each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the splitter fit a 1\/2- or 3\/4-inch tap?\u003c\/h3\u003e\n\u003cp\u003eYes, for suitable taps with a 1\/2- or 3\/4-inch male thread. The splitter has a 1\/2-inch female thread; the 3\/4-inch adapter is included. Check the thread and available space on the tap before purchase.\u003c\/p\u003e\n\u003ch3\u003eCan both outlets be used at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. Both outlets can be opened independently. The available water must be sufficient for both consumers; high total demand may reduce flow pressure.\u003c\/p\u003e\n\u003ch3\u003eCan a garden hose be connected?\u003c\/h3\u003e\n\u003cp\u003eYes, the outlets are intended for suitable 1\/2-inch click connectors or compatible hose couplings.\u003c\/p\u003e\n\u003ch3\u003eWhat should I do in frosty conditions?\u003c\/h3\u003e\n\u003cp\u003eBefore frost, remove the valve, drain it completely and store it somewhere frost-free, as freezing water may damage the housing.\u003c\/p\u003e\n\u003ch3\u003eCan I connect an irrigation timer?\u003c\/h3\u003e\n\u003cp\u003eGenerally yes, with suitable connectors and sufficient space. The outlets have click connections; an irrigation timer with a threaded connection may require a suitable adapter. Do not load the connection with a heavy, freely hanging device.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595073401181,"sku":"328","price":4.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940590.jpg?v=1777920042"},{"product_id":"bradas-storz-d-kupplung-stf100a-mit-1-zoll-innengewinde","title":"Storz-D coupling STF100A with 1-inch female thread – Bradas","description":"\u003cp\u003eThe Bradas STF100A is a symmetrical Storz D coupling made of aluminium with a 1-inch female thread. It connects to a compatible Storz D coupling half by aligning, fitting together and making a short twisting movement. The female thread is intended for a matching 1-inch male thread; a suitable hose tail is required for a hose.\u003c\/p\u003e\n\u003ch2\u003eStorz D connection\u003c\/h2\u003e\n\u003cp\u003eThe matching coupling halves are aligned and connected with a short twisting movement. The Storz size and connection geometry must match.\u003c\/p\u003e\n\u003ch2\u003e1-inch female thread for compatible fittings\u003c\/h2\u003e\n\u003cp\u003eThe product has a 1-inch female thread. This thread is not a direct hose connection; a suitable hose tail or corresponding adaptor is required for a hose.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe coupling body is made of aluminium and has a rubber seal. After use, the coupling can be rinsed with clean water and the seal checked for wear.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STF100A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443035\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1-inch female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Rubber seal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Symmetrical coupling, connected by a short twisting movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 1-inch female thread connect to?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for a matching 1-inch male thread on a pipe, valve or fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes Storz D connect directly to a Storz C coupling?\u003c\/h3\u003e\n\u003cp\u003eNo. D and C are different coupling sizes. A suitable reducing coupling is required for the transition.\u003c\/p\u003e\n\u003ch3\u003eHow is the coupling connected?\u003c\/h3\u003e\n\u003cp\u003eThe matching coupling halves are aligned and connected with a short twisting movement.\u003c\/p\u003e\n\u003ch3\u003eCan I attach a hose directly to the female thread?\u003c\/h3\u003e\n\u003cp\u003eNo. This version has a female thread and no hose tail. A suitable connector with a hose tail or a suitable Storz hose coupling is required for the hose connection.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097223517,"sku":"810","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941331.jpg?v=1777920730"},{"product_id":"bradas-storz-c-kupplung-mit-2-zoll-innengewinde","title":"Storz C Coupling with 2-Inch Female Thread – Bradas","description":"\u003cp\u003eThe Bradas STF200A connects a fitting with a matching 2-inch male thread to a Storz C system. The aluminium coupling has a female thread on one side and a symmetrical C coupling head on the other. Both connection sides must match the existing components.\u003c\/p\u003e\n\u003ch2\u003eThread and coupling side\u003c\/h2\u003e\n\u003cp\u003eThe 2-inch female thread is screwed onto a matching male thread on a pipe, pump, valve or fitting. The other side is a symmetrical Storz C coupling for a compatible counterpart.\u003c\/p\u003e\n\u003ch2\u003eSelect the C size\u003c\/h2\u003e\n\u003cp\u003eStorz C is a distinct coupling size. The Storz size and counterpart must match for a connection; the thread size describes only the threaded connection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe coupling body is made of aluminium. Sealing surfaces and the seal should be kept clean and checked for damage or wear before use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STF200A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443042\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 2-inch female thread (GW)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling side:\u003c\/strong\u003e Storz C, symmetrical coupling half\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated in the coupling seat\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Industry, agriculture, irrigation and construction-site drainage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 2-inch female thread connect to?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed onto a matching 2-inch male thread on a pipe, pump, valve or fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes this coupling connect directly to Storz D?\u003c\/h3\u003e\n\u003cp\u003eNo. C and D are different Storz sizes. A suitable C-to-D reducing coupling is required.\u003c\/p\u003e\n\u003ch3\u003eAre the thread size and Storz size the same?\u003c\/h3\u003e\n\u003cp\u003eNo. The 2-inch measurement describes the female thread; Storz size C describes the coupling side. Both specifications must match the connection.\u003c\/p\u003e\n\u003ch3\u003eHow is another Storz type connected?\u003c\/h3\u003e\n\u003cp\u003eA suitable adaptor is required to transition between different Storz sizes.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097354589,"sku":"811","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941331.jpg?v=1777920730"},{"product_id":"bradas-storz-b-kupplung-mit-3-zoll-innengewinde","title":"Storz B coupling with 3-inch female thread – Bradas","description":"\u003cp\u003eThe Bradas STF300A connects a compatible 3-inch threaded fitting to a Storz B coupling half. Made from aluminium, it is screwed onto the matching male thread using its female thread. The B coupling head accepts the second Storz half.\u003c\/p\u003e\n\u003ch2\u003eFemale thread and mating part\u003c\/h2\u003e\n\u003cp\u003eThe 3-inch female thread is screwed onto a matching male thread on a pipe, pump, valve or fitting. The symmetrical Storz B side accepts a mating coupling of the same size.\u003c\/p\u003e\n\u003ch2\u003eChoosing size B\u003c\/h2\u003e\n\u003cp\u003eStorz B is a separate coupling size. Check the size of the mating coupling separately from the thread measurement before assembling a connection.\u003c\/p\u003e\n\u003ch2\u003eAluminium and care\u003c\/h2\u003e\n\u003cp\u003eThe cast aluminium body is lightweight. Keep the sealing surfaces and seal clean, and check them for damage or wear before use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STF300A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443059\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 3-inch female thread (GW)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling side:\u003c\/strong\u003e Storz B, symmetrical mating coupling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated in the coupling seat\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Industry, agriculture, irrigation and construction-site drainage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 3-inch female thread connect to?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed onto a matching 3-inch male thread on a pipe, pump, valve or fitting.\u003c\/p\u003e\n\u003ch3\u003eCan I push a hose directly onto this coupling?\u003c\/h3\u003e\n\u003cp\u003eNo. The STF300A has a female thread and no hose tail. A suitable connector or Storz B hose coupling is required for the hose.\u003c\/p\u003e\n\u003ch3\u003eWhy must the thread and Storz size be checked separately?\u003c\/h3\u003e\n\u003cp\u003eThe 3-inch measurement describes the female thread. The mating coupling, however, is selected by its Storz size.\u003c\/p\u003e\n\u003ch3\u003eHow can I connect a different Storz type?\u003c\/h3\u003e\n\u003cp\u003eA suitable adaptor or reducing coupling is required to transition between different Storz sizes.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097420125,"sku":"812","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941331.jpg?v=1777920730"},{"product_id":"bradas-storz-a-kupplung-mit-4-zoll-innengewinde","title":"Storz A coupling with 4-inch female thread – Bradas","description":"\u003cp\u003eThe Bradas STF400A is designed to transition from a compatible 4-inch male thread to Storz A. Its aluminium body has an A coupling head with an integrated seal. The threaded side and Storz side must each match the existing mating part.\u003c\/p\u003e\n\u003ch2\u003e4-inch threaded connection for pipe or fitting\u003c\/h2\u003e\n\u003cp\u003eThe 4-inch female thread is screwed onto a matching male thread on a pump, valve, fitting or pipe. The symmetrical Storz A side is designed for a matching mating part of size A.\u003c\/p\u003e\n\u003ch2\u003eDistinguishing thread and Storz size\u003c\/h2\u003e\n\u003cp\u003eThe thread measurement and Storz size describe different connection sides. Both specifications must match the existing mating part for a suitable selection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe cast aluminium body keeps the weight of this large coupling relatively low. Keep the sealing surfaces and seal clean and check them for wear.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STF400A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443066\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 4-inch female thread (GW)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling side:\u003c\/strong\u003e Storz A, symmetrical mating coupling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated in the coupling seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 4-inch female thread connect to?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed onto a matching 4-inch male thread on a pump, fitting, valve or pipe.\u003c\/p\u003e\n\u003ch3\u003eWhat does Storz A mean?\u003c\/h3\u003e\n\u003cp\u003eStorz A identifies the size of the symmetrical coupling side. The mating part must also be size A.\u003c\/p\u003e\n\u003ch3\u003eIs the 4-inch thread the Storz size?\u003c\/h3\u003e\n\u003cp\u003eNo. The 4-inch measurement describes the female thread; Storz A describes the coupling size.\u003c\/p\u003e\n\u003ch3\u003eHow is a connection to Storz B made?\u003c\/h3\u003e\n\u003cp\u003eStorz A and Storz B cannot be connected directly. A suitable adaptor is required.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097551197,"sku":"813","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941331.jpg?v=1777920730"},{"product_id":"bradas-storz-c-kupplung-mit-2-zoll-aussengewinde","title":"Storz C coupling with 2-inch male thread – Bradas","description":"\u003cp\u003eThe Bradas STM200A provides a transition between a Storz C mating coupling and a fitting with a matching 2-inch female thread. It combines a C coupling head with a male thread. The body is made from aluminium and the seal is located on the Storz side.\u003c\/p\u003e\n\u003ch2\u003eMale thread and mating connection\u003c\/h2\u003e\n\u003cp\u003eThe 2-inch male thread is screwed into a matching female thread on a pipe, pump, valve or fitting. The coupling side is designed as a Storz C mating part for the corresponding size.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Storz size\u003c\/h2\u003e\n\u003cp\u003eStorz C identifies the coupling size and must be considered separately from the 2-inch thread measurement. Both specifications must match the existing connection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe coupling body is made from aluminium. Keep the thread, sealing surfaces and seal clean, and check them for damage or wear before use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STM200A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443080\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 2-inch male thread (GZ)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated on the Storz side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the 2-inch male thread differ from the Storz size?\u003c\/h3\u003e\n\u003cp\u003eThe 2-inch measurement describes the male thread. Storz C describes the coupling size; both specifications must match for the connection.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 2-inch male thread screw into?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed into a matching female thread on a pipe, pump, valve or fitting.\u003c\/p\u003e\n\u003ch3\u003eWhich mating coupling fits the Storz C side?\u003c\/h3\u003e\n\u003cp\u003eA mating coupling of the same Storz size C is required. A matching thread alone is not sufficient.\u003c\/p\u003e\n\u003ch3\u003eCan I push a hose directly onto the male thread?\u003c\/h3\u003e\n\u003cp\u003eNo. The threaded side is screwed into a matching female thread. A suitable hose connector is required to attach a hose.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097780573,"sku":"815","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941335.jpg?v=1777920740"},{"product_id":"bradas-storz-b-kupplung-mit-3-zoll-aussengewinde","title":"Storz B coupling with 3-inch male thread – Bradas","description":"\u003cp\u003eThe Bradas STM300A provides a transition from a compatible 3-inch female thread to Storz B. The male thread is screwed in, while the matching B mating coupling attaches at the other end. The coupling body and integrated Storz seal connect the two systems.\u003c\/p\u003e\n\u003ch2\u003eMale thread and mating connection\u003c\/h2\u003e\n\u003cp\u003eThe 3-inch male thread is screwed into a matching female thread on a pipe, pump, valve or fitting. The coupling side is designed as a Storz B mating part for the corresponding size.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Storz size\u003c\/h2\u003e\n\u003cp\u003eStorz B identifies the coupling size and must be considered separately from the 3-inch thread measurement. Both specifications must match the existing connection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe coupling body is made from aluminium. Keep the thread, sealing surfaces and seal clean, and check them for damage or wear before use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STM300A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443097\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 3-inch male thread (GZ)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated on the Storz side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the 3-inch male thread differ from the Storz size?\u003c\/h3\u003e\n\u003cp\u003eThe 3-inch measurement describes the male thread. Storz B describes the coupling size; both specifications must match for the connection.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 3-inch male thread screw into?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed into a matching female thread on a pipe, pump, valve or fitting.\u003c\/p\u003e\n\u003ch3\u003eWhich mating coupling fits the Storz B side?\u003c\/h3\u003e\n\u003cp\u003eA mating coupling of the same Storz size B is required. A matching thread alone is not sufficient.\u003c\/p\u003e\n\u003ch3\u003eCan I push a hose directly onto the male thread?\u003c\/h3\u003e\n\u003cp\u003eNo. The threaded side is screwed into a matching female thread. A suitable hose connector is required to attach a hose.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595097813341,"sku":"816","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941335.jpg?v=1777920740"},{"product_id":"bradas-storz-reduzierkupplung-c-auf-d-aus-aluminium","title":"Storz reducing coupling C to D, aluminium – Bradas","description":"\u003cp\u003eThe Bradas STRE1020A connects a Storz C side to a Storz D side. It is designed for compatible Storz mating parts of both sizes; this transition has no screw thread. The coupling body is made from aluminium.\u003c\/p\u003e\n\u003ch2\u003eStorz C to D\u003c\/h2\u003e\n\u003cp\u003eThe Storz adaptor connects a mating part of size C with one of size D. The 2 to 1 inch size designation refers to the two connection sizes; the component has no threaded connections.\u003c\/p\u003e\n\u003ch2\u003eCompatible connection\u003c\/h2\u003e\n\u003cp\u003eFit the size C and size D mating couplings to their respective connection sides and lock the Storz connections. Coupling seats and seals must be clean and undamaged.\u003c\/p\u003e\n\u003ch2\u003eMaterial and distinction\u003c\/h2\u003e\n\u003cp\u003eThe component is made from aluminium and reduces between two Storz sizes. It is not a blanking coupling: a blanking coupling closes a connection, whereas this reducer connects two different sizes.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STRE1020A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5907544409120\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReduction:\u003c\/strong\u003e Storz C to D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e Storz coupling on both sides, sizes C and D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e No screw thread; Storz coupling on both sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize designation:\u003c\/strong\u003e 2 to 1 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich mating parts fit Storz C to D?\u003c\/h3\u003e\n\u003cp\u003eA compatible Storz mating part of size C belongs on the C side, and a compatible size D mating part on the D side. Check the sizes before coupling.\u003c\/p\u003e\n\u003ch3\u003eDoes the reducer have a threaded connection?\u003c\/h3\u003e\n\u003cp\u003eNo. Both sides are Storz couplings. The designation describes the two Storz sizes, not a screw thread.\u003c\/p\u003e\n\u003ch3\u003eHow does it differ from a blanking coupling?\u003c\/h3\u003e\n\u003cp\u003eA reducing coupling connects two different Storz sizes. A blanking coupling closes a single connection.\u003c\/p\u003e\n\u003ch3\u003eCan I connect any Storz sizes with it?\u003c\/h3\u003e\n\u003cp\u003eNo. This model is designed for the Storz C to D combination. A reducer designed for the required sizes is needed for other combinations.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595098272093,"sku":"818","price":11.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941339.jpg?v=1777920750"},{"product_id":"bradas-storz-reduzierkupplung-b-auf-c-aus-aluminium","title":"Storz reducing coupling B to C, aluminium – Bradas","description":"\u003cp\u003eThe Bradas STRE2030A connects Storz B and Storz C connections. This aluminium reducing coupling has two different-sized coupling sides with seals. It is fitted between the compatible mating parts and requires no threaded connection.\u003c\/p\u003e\n\u003ch2\u003eStorz B to C\u003c\/h2\u003e\n\u003cp\u003eThe Storz adaptor connects a mating part of size B with one of size C. The 3 to 2 inch size designation refers to the two connection sizes; the component has no threaded connections.\u003c\/p\u003e\n\u003ch2\u003eCompatible connection\u003c\/h2\u003e\n\u003cp\u003eFit the size B and size C mating couplings to their respective connection sides and lock the Storz connections. Coupling seats and seals must be clean and undamaged.\u003c\/p\u003e\n\u003ch2\u003eMaterial and distinction\u003c\/h2\u003e\n\u003cp\u003eThe component is made from aluminium and reduces between two Storz sizes. It is not a blanking coupling: a blanking coupling closes a connection, whereas this reducer connects two different sizes.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STRE2030A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5907544409137\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReduction:\u003c\/strong\u003e Storz B to C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e Storz coupling on both sides, sizes B and C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e No screw thread; Storz coupling on both sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize designation:\u003c\/strong\u003e 3 to 2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich mating parts fit Storz B to C?\u003c\/h3\u003e\n\u003cp\u003eA compatible Storz mating part of size B belongs on the B side, and a compatible size C mating part on the C side. Check the sizes before coupling.\u003c\/p\u003e\n\u003ch3\u003eDoes the reducer have a threaded connection?\u003c\/h3\u003e\n\u003cp\u003eNo. Both sides are Storz couplings. The designation describes the two Storz sizes, not a screw thread.\u003c\/p\u003e\n\u003ch3\u003eHow does it differ from a blanking coupling?\u003c\/h3\u003e\n\u003cp\u003eA reducing coupling connects two different Storz sizes. A blanking coupling closes a single connection.\u003c\/p\u003e\n\u003ch3\u003eCan I connect any Storz sizes with it?\u003c\/h3\u003e\n\u003cp\u003eNo. This model is designed for the Storz B to C combination. A reducer designed for the required sizes is needed for other combinations.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595098435933,"sku":"819","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941339.jpg?v=1777920750"},{"product_id":"bradas-storz-reduzierkupplung-a-auf-b-aus-aluminium","title":"Storz A-to-B reducing coupling, aluminium – Bradas","description":"\u003cp\u003eThe Bradas STRE3040A bridges the size difference between Storz A and Storz B. Its aluminium body combines both coupling sizes in one component with an integrated seal. The transition is designed for this connection combination.\u003c\/p\u003e\n\u003ch2\u003eStorz A to B\u003c\/h2\u003e\n\u003cp\u003eThe Storz adapter connects a size A counterpart to a size B counterpart. The designation 4 to 3 inches refers to the two connection sizes; the component has no threaded connections.\u003c\/p\u003e\n\u003ch2\u003eMatching connection\u003c\/h2\u003e\n\u003cp\u003eFit the size A and size B counterpart couplings to the relevant connection side and lock the Storz connections. Coupling seats and seals must be clean and undamaged.\u003c\/p\u003e\n\u003ch2\u003eMaterial and distinction\u003c\/h2\u003e\n\u003cp\u003eThe component is made from aluminium and reduces between two Storz sizes. It does not replace a blank coupling: a blank coupling closes a connection, whereas this reducer connects two different sizes.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STRE3040A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5907544418351\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReduction:\u003c\/strong\u003e Storz A to B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e Storz coupling on both sides, sizes A and B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e No screw thread; Storz coupling on both sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize designation:\u003c\/strong\u003e 4 to 3 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich counterparts fit Storz A to B?\u003c\/h3\u003e\n\u003cp\u003eA matching size A Storz counterpart belongs on side A; a matching size B counterpart belongs on side B. Check the sizes before coupling.\u003c\/p\u003e\n\u003ch3\u003eDoes the reducer have a threaded connection?\u003c\/h3\u003e\n\u003cp\u003eNo. Both sides are designed as Storz couplings. The designation describes the two Storz sizes, not a screw thread.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from a blank coupling?\u003c\/h3\u003e\n\u003cp\u003eA reducing coupling connects two different Storz sizes. A blank coupling, by contrast, closes a single connection.\u003c\/p\u003e\n\u003ch3\u003eCan I connect any Storz sizes with it?\u003c\/h3\u003e\n\u003cp\u003eNo. This model is designed for the Storz A-to-B combination. For other sizes, you need a suitable reducer.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595098501469,"sku":"820","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/storz-schnellkupplungjpg-11941341.jpg?v=1777920754"},{"product_id":"bradas-storz-d-blindkupplung-1-zoll-aluminium-mit-kette","title":"Storz D blank coupling 1 inch, aluminium with chain – Bradas","description":"\u003cp\u003eThe Bradas STB100A is a blank closure for a matching Storz D connection. The aluminium cap with integrated seal covers the opening and keeps dirt away from the coupling seat. The supplied chain secures the cap to the connection so that it cannot be lost when removed.\u003c\/p\u003e\n\u003ch2\u003eBlank cap for Storz D\u003c\/h2\u003e\n\u003cp\u003eThe blank coupling is attached to a matching Storz D counterpart. The 1-inch designation describes this version; the matching Storz size is decisive when selecting it. The cap has no hose passage.\u003c\/p\u003e\n\u003ch2\u003eChain to prevent loss\u003c\/h2\u003e\n\u003cp\u003eAttach the free end of the chain to a suitable point on the connection. When disconnected, the blank cap remains within reach. The chain does not contribute to sealing.\u003c\/p\u003e\n\u003ch2\u003eKeep the seal and coupling seat clean\u003c\/h2\u003e\n\u003cp\u003eRemove dirt from the sealing surface and coupling seat before fitting the cap. Check the integrated seal for damage. The connection must be fully depressurised before loosening it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz D, bayonet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Storz D (1-inch designation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLoss prevention:\u003c\/strong\u003e Attached chain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STB100A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connections is the blank coupling intended for?\u003c\/h3\u003e\n\u003cp\u003eIt fits a Storz D counterpart. Compare the marking and design of the existing connection; the inch size alone is not sufficient for selection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the purpose of the chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain keeps the removed blank coupling attached to the hose or fitting, reducing the risk of loss.\u003c\/p\u003e\n\u003ch3\u003eCan I remove the cap while residual pressure remains?\u003c\/h3\u003e\n\u003cp\u003eNo. The connection must be fully depressurised before removing the blank coupling.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from an open hose coupling?\u003c\/h3\u003e\n\u003cp\u003eThe blank coupling closes a matching open Storz D connection. A hose coupling, by contrast, connects a hose or another counterpart.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595098599773,"sku":"821","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blindkupplungjpg-11941342.jpg?v=1777920760"},{"product_id":"bradas-storz-c-blindkupplung-2-zoll-aluminium-mit-kette","title":"Storz C blank coupling 2 inches, aluminium with chain – Bradas","description":"\u003cp\u003eThe Bradas STB200A is a blank closure for a matching Storz C connection. The aluminium cap with integrated seal covers the opening and keeps dirt away from the coupling seat. The supplied chain secures the cap to the connection so that it cannot be lost when removed.\u003c\/p\u003e\n\u003ch2\u003eBlank cap for Storz C\u003c\/h2\u003e\n\u003cp\u003eThe blank coupling is attached to a matching Storz C counterpart. The 2-inch designation describes this version; the matching Storz size is decisive when selecting it. The cap has no hose passage.\u003c\/p\u003e\n\u003ch2\u003eChain to prevent loss\u003c\/h2\u003e\n\u003cp\u003eAttach the free end of the chain to a suitable point on the connection. When disconnected, the blank cap remains within reach. The chain does not contribute to sealing.\u003c\/p\u003e\n\u003ch2\u003eKeep the seal and coupling seat clean\u003c\/h2\u003e\n\u003cp\u003eRemove dirt from the sealing surface and coupling seat before fitting the cap. Check the integrated seal for damage. The connection must be fully depressurised before loosening it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz C, bayonet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Storz C (2-inch designation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLoss prevention:\u003c\/strong\u003e Attached chain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STB200A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443110\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connections is the blank coupling intended for?\u003c\/h3\u003e\n\u003cp\u003eIt fits a Storz C counterpart. Compare the marking and design of the existing connection; the inch size alone is not sufficient for selection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the purpose of the chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain keeps the removed blank coupling attached to the hose or fitting, reducing the risk of loss.\u003c\/p\u003e\n\u003ch3\u003eCan I remove the cap while residual pressure remains?\u003c\/h3\u003e\n\u003cp\u003eNo. The connection must be fully depressurised before removing the blank coupling.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from an open hose coupling?\u003c\/h3\u003e\n\u003cp\u003eThe blank coupling closes a matching open Storz C connection. A hose coupling, by contrast, connects a hose or another counterpart.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595099779421,"sku":"822","price":7.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blindkupplungjpg-11941342.jpg?v=1777920760"},{"product_id":"bradas-storz-b-blindkupplung-3-zoll-aluminium-mit-kette","title":"Storz B blank coupling 3 inches, aluminium with chain – Bradas","description":"\u003cp\u003eThe Bradas STB300A is a blank closure for a matching Storz B connection. The aluminium cap with integrated seal covers the opening and keeps dirt away from the coupling seat. The supplied chain secures the cap to the connection so that it cannot be lost when removed.\u003c\/p\u003e\n\u003ch2\u003eBlank cap for Storz B\u003c\/h2\u003e\n\u003cp\u003eThe blank coupling is attached to a matching Storz B counterpart. The 3-inch designation describes this version; the matching Storz size is decisive when selecting it. The cap has no hose passage.\u003c\/p\u003e\n\u003ch2\u003eChain to prevent loss\u003c\/h2\u003e\n\u003cp\u003eAttach the free end of the chain to a suitable point on the connection. When disconnected, the blank cap remains within reach. The chain does not contribute to sealing.\u003c\/p\u003e\n\u003ch2\u003eKeep the seal and coupling seat clean\u003c\/h2\u003e\n\u003cp\u003eRemove dirt from the sealing surface and coupling seat before fitting the cap. Check the integrated seal for damage. The connection must be fully depressurised before loosening it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz B, bayonet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Storz B (3-inch designation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLoss prevention:\u003c\/strong\u003e Attached chain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STB300A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443127\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connections is the blank coupling intended for?\u003c\/h3\u003e\n\u003cp\u003eIt fits a Storz B counterpart. Compare the marking and design of the existing connection; the inch size alone is not sufficient for selection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the purpose of the chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain keeps the removed blank coupling attached to the hose or fitting, reducing the risk of loss.\u003c\/p\u003e\n\u003ch3\u003eCan I remove the cap while residual pressure remains?\u003c\/h3\u003e\n\u003cp\u003eNo. The connection must be fully depressurised before removing the blank coupling.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from an open hose coupling?\u003c\/h3\u003e\n\u003cp\u003eThe blank coupling closes a matching open Storz B connection. A hose coupling, by contrast, connects a hose or another counterpart.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595099812189,"sku":"823","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blindkupplungjpg-11941342.jpg?v=1777920760"},{"product_id":"blindkupplung-4-storz-a-mit-kette","title":"Storz A blind coupling, 4 inches, with chain – Bradas","description":"\u003cp\u003eThe Bradas Storz A blind coupling in size 4 inches closes a compatible open connection. It is made of aluminium, has an integrated seal and is supplied with a chain to prevent loss.\u003c\/p\u003e\n\u003ch2\u003eBlind closure for Storz A\u003c\/h2\u003e\n\u003cp\u003eThe blind coupling is intended for a compatible Storz A mating part. This version has no hose passage.\u003c\/p\u003e\n\u003ch2\u003eChain to prevent loss\u003c\/h2\u003e\n\u003cp\u003eThe supplied chain keeps the removed blind cap within reach and reduces the risk of loss.\u003c\/p\u003e\n\u003ch2\u003eSeal and coupling seat\u003c\/h2\u003e\n\u003cp\u003eThe sealing surface and coupling seat should be clean and undamaged before installation. The connection must be depressurised before loosening.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e Storz A, bayonet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Storz A (size designation 4 inches)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLoss prevention:\u003c\/strong\u003e Attached chain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e STB400A\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5904182443134\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connection is the blind coupling intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for a mating part of Storz size A. The available size must be checked before selection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the chain for?\u003c\/h3\u003e\n\u003cp\u003eThe chain keeps the removed blind coupling attached to the hose or fitting and reduces the risk of loss.\u003c\/p\u003e\n\u003ch3\u003eCan the blind coupling be removed under residual pressure?\u003c\/h3\u003e\n\u003cp\u003eNo. The connection must be completely depressurised before removal.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a blind coupling and a hose coupling?\u003c\/h3\u003e\n\u003cp\u003eA blind coupling closes a compatible open connection. A hose coupling, by contrast, connects a hose or mating part.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595099844957,"sku":"824","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blindkupplungjpg-11941342.jpg?v=1777920760"},{"product_id":"bradas-4-fach-wasserverteiler-einzeln-absperrbar-34-1-zoll","title":"4-way water distributor, individually shut-off, ¾ \/ 1 inch – Bradas","description":"\u003cp\u003eThe Bradas water distributor turns one tap into four separately controlled hose outlets. Each outlet can be opened, throttled or fully shut off. The inlet has a 1-inch female thread with an adapter to ¾ inch. This allows the distributor to fit taps with the corresponding male thread.\u003c\/p\u003e\n\u003ch2\u003eControl four lines separately\u003c\/h2\u003e\n\u003cp\u003eEach outlet can be operated individually using its rotary valve. Unneeded lines can be closed while other connections remain in use.\u003c\/p\u003e\n\u003ch2\u003eFitting to the tap\u003c\/h2\u003e\n\u003cp\u003eScrew the distributor’s female thread onto a tap with the matching male thread and use the supplied adapter with ¾-inch taps. Connect suitable garden hose quick connectors to the four outlets. Remove and fully drain the distributor before frost.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlets:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlet connections:\u003c\/strong\u003e 4 connections for quick connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves:\u003c\/strong\u003e 4 rotary valves, individually adjustable and shut-off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTap connection:\u003c\/strong\u003e ¾- and 1-inch female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdapter:\u003c\/strong\u003e ¾-inch to 1-inch reducing adapter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden irrigation, multiple hoses, sprinkler systems, irrigation timers, pressure washer supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan several outlets be used at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes, several or all four outlets can be opened at the same time. The available water flow can be distributed between the open lines. Pressure is not divided by the number of outlets; the actual pressure depends on the water source, installation and line resistance.\u003c\/p\u003e\n\u003ch3\u003eWhich tap threads fit?\u003c\/h3\u003e\n\u003cp\u003eTaps with ¾- or 1-inch male threads. The distributor has the matching female thread; the reducing adapter is included.\u003c\/p\u003e\n\u003ch3\u003eCan the outlets be shut off individually?\u003c\/h3\u003e\n\u003cp\u003eYes, each of the four outlets has its own rotary valve and can be adjusted separately or fully closed.\u003c\/p\u003e\n\u003ch3\u003eWhich connections are used at the outlets?\u003c\/h3\u003e\n\u003cp\u003eThe outlets accept suitable garden hose quick connectors. Check secure fit and watertightness before use; special connectors with a different connection profile require a suitable adaptor.\u003c\/p\u003e\n\u003ch3\u003eCan the distributor be used for several irrigation devices?\u003c\/h3\u003e\n\u003cp\u003eYes, for example for a spray gun and lawn sprinkler. When several devices operate at once, the water source and supply line must provide the combined flow. If capacity is insufficient, use the devices one after another.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595100107101,"sku":"878","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941393.jpg?v=1777920872"},{"product_id":"bradas-white-line-schlauchkupplung-1-2-zoll-mit-wasserstopp","title":"Hose coupling White Line 1\/2 inch with water stop – Bradas","description":"\u003cp\u003eThe White Line hose coupling with water stop makes it easier to change between a spray nozzle, sprinkler and other irrigation accessories. When the connected device is removed, the integrated stop valve interrupts the water flow at the coupling. This version is designed for 1\/2-inch hoses and is secured to the hose end with a screw nut.\u003c\/p\u003e\n\u003ch2\u003eStopping the Water Flow When Changing Devices\u003c\/h2\u003e\n\u003cp\u003eThe coupling is particularly useful at the hose end when irrigation devices are changed frequently. The mating part is plugged into the coupling connection; when it is removed, the valve closes automatically.\u003c\/p\u003e\n\u003ch2\u003eFitting to the Hose\u003c\/h2\u003e\n\u003cp\u003ePush the hose end into the coupling and secure it with the screw nut. Before installation, check that the hose diameter and plug-in system match the existing accessories. The coupling is made from plastic and has a white\/grey finish.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Automatic water stop when disconnected\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling body:\u003c\/strong\u003e Plastic with stop valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose fastening:\u003c\/strong\u003e Screw nut\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e White \/ Grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free fastening by pushing on and tightening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhen does the water stop close?\u003c\/h3\u003e\n\u003cp\u003eThe integrated valve closes when the connected device is removed, thereby interrupting the water flow at the coupling.\u003c\/p\u003e\n\u003ch3\u003eWhich hose is the coupling designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for standard 1\/2-inch garden hoses with a 12.5 mm internal diameter.\u003c\/p\u003e\n\u003ch3\u003eHow is the coupling secured?\u003c\/h3\u003e\n\u003cp\u003eInsert the hose end and secure it with the screw nut. No tools are required.\u003c\/p\u003e\n\u003ch3\u003eDo I also need a water stop at the tap connection?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily. The water stop is mainly useful where irrigation devices are changed frequently.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":64595131400541,"sku":"1286","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/1422691jpg-11942025.jpg?v=1777922061"},{"product_id":"duo-zapfventil-mit-doppelanschluss-und-separatem-durchflussregler","title":"Duo Water Tap Valve with Double Connection and Separate Flow Regulator","description":"\u003cp\u003eThe duo tap valve provides two separately controllable water connections at one outlet. This allows, for example, a garden hose and an irrigation system to be connected in parallel. The lower outlet has its own flow regulator. The body is made of nickel-plated brass; the large orange lever and blue regulator lever clearly distinguish the two controls.\u003c\/p\u003e\n\u003ch2\u003eOperating two outlets independently\u003c\/h2\u003e\n\u003cp\u003eThe main lever controls the upper connection, while the smaller regulator operates the lower outlet. This allows two users to operate simultaneously and the water flow at the lower connection to be adjusted separately.\u003c\/p\u003e\n\u003ch2\u003eVariable connection solution\u003c\/h2\u003e\n\u003cp\u003eThe coupling connection can be unscrewed to reveal a larger male thread. On the 1\/2-inch version, this exposes a 3\/4-inch connection; on the 3\/4-inch version, it exposes a 1-inch connection. The appropriate version depends on the existing pipe.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValve type:\u003c\/strong\u003e Duo tap valve with double connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Nickel-plated brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVersions:\u003c\/strong\u003e 1\/2 inch and 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlets:\u003c\/strong\u003e Two, independently controllable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLower outlet:\u003c\/strong\u003e Separate flow regulator\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain lever:\u003c\/strong\u003e Steel with orange rubber coating\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRegulator lever:\u003c\/strong\u003e Blue, plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling connection:\u003c\/strong\u003e Removable by unscrewing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional thread:\u003c\/strong\u003e 1\/2 to 3\/4 inch or 3\/4 to 1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan both outlets be used at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. The two outlets can be controlled independently, and the lower connection also has its own flow regulator.\u003c\/p\u003e\n\u003ch3\u003eWhich sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe valve is specified in 1\/2 inch and 3\/4 inch.\u003c\/p\u003e\n\u003ch3\u003eWhat does the removable coupling connection do?\u003c\/h3\u003e\n\u003cp\u003eUnscrewing it reveals a larger male thread: 3\/4 inch on the 1\/2-inch version or 1 inch on the 3\/4-inch version.\u003c\/p\u003e\n\u003ch3\u003eIs the valve frost-proof?\u003c\/h3\u003e\n\u003cp\u003eNo. In frost conditions, the valve must be drained or protected.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"1\/2\"","offer_id":65814863184221,"sku":"1242","price":9.49,"currency_code":"EUR","in_stock":true},{"title":"3\/4\"","offer_id":65815551312221,"sku":"1244","price":10.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941863.jpg?v=1788693621"},{"product_id":"bradas-spritzduese-mit-geka-kompatibler-schnellkupplung-1-2-oder-3-4-zoll","title":"Spray nozzle with GEKA-compatible quick coupling, 1\/2 or 3\/4 inch – Bradas","description":"\u003cp\u003eThis spray nozzle combines an adjustable water jet with a quick coupling for watering and cleaning tasks. Turn the nozzle head to switch between a concentrated full jet and a fine mist. The nozzle is available in selectable 1\/2 or 3\/4 inch versions. Before buying, check that the connection profile and seal match the existing counterpart.\u003c\/p\u003e\n\u003ch2\u003eAdjust the spray pattern to suit the task\u003c\/h2\u003e\n\u003cp\u003eA full jet directs water at one concentrated point, while the fine mist provides softer distribution. This makes the nozzle suitable for beds, shrubs, potted plants and appropriate cleaning tasks.\u003c\/p\u003e\n\u003ch2\u003eQuick coupling and size selection\u003c\/h2\u003e\n\u003cp\u003eThe GEKA-compatible coupling is designed for quick, tool-free changes of nozzle and accessories. Choose 1\/2 or 3\/4 inch to match the existing connection. Before fitting, check that the coupling profile and seal match the counterpart.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling system:\u003c\/strong\u003e GEKA-compatible quick coupling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection sizes:\u003c\/strong\u003e 1\/2 inch or 3\/4 inch selectable versions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNozzle head:\u003c\/strong\u003e Adjustable from full jet to fine mist\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Plastic \/ metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting:\u003c\/strong\u003e Tool-free connection and changeover\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden watering and suitable cleaning tasks\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does GEKA-compatible mean?\u003c\/h3\u003e\n\u003cp\u003eThe nozzle is designed for use with a suitable GEKA-compatible quick-coupling profile. Before buying, compare the profile, size and seal of the existing counterpart.\u003c\/p\u003e\n\u003ch3\u003eWhich connection sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe nozzle is available in selectable 1\/2 and 3\/4 inch versions.\u003c\/p\u003e\n\u003ch3\u003eCan the spray pattern be adjusted?\u003c\/h3\u003e\n\u003cp\u003eYes. Turning the nozzle head adjusts the water jet between a full jet and a fine mist.\u003c\/p\u003e\n\u003ch3\u003eIs the nozzle suitable for cleaning tasks?\u003c\/h3\u003e\n\u003cp\u003eThe full jet can be used for suitable cleaning tasks on outdoor surfaces. The actual effect depends on water pressure and distance.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"1\/2\"","offer_id":65814872392029,"sku":"1312-1\/2","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"3\/4\"","offer_id":65815540564317,"sku":"1312-3\/4","price":11.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11942083.jpg?v=1788693903"},{"product_id":"schlauchkupplung-mit-automatik-wasserstop-1-2-oder-3-4","title":"Hose connector with automatic water stop 1\/2\" or 3\/4\"","description":"\u003cp\u003eThe hose connector with automatic water stop interrupts the water flow when the connected device is disconnected. This makes it possible to switch between a spray gun, lawn sprinkler or watering wand without disconnecting the hose from the tap each time. The connector is secured to the hose with a screw sleeve and is available in two sizes.\u003c\/p\u003e\n\u003ch2\u003eWater stop and click connection\u003c\/h2\u003e\n\u003cp\u003eWhen the connected device is pulled off, the integrated valve closes the water passage. To continue working, insert the next device into the click connection. The hose connection is made with the hand-tightened screw sleeve.\u003c\/p\u003e\n\u003ch2\u003eChoose the right hose size\u003c\/h2\u003e\n\u003cp\u003eThe smaller version is intended for 1\/2\" hoses with an internal diameter of approximately 12.5 mm. The 3\/4\" version fits hoses with an internal diameter of approximately 19 mm. The hose’s internal diameter is decisive.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Automatic water stop\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDevice connection:\u003c\/strong\u003e Click system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose sizes:\u003c\/strong\u003e 1\/2\" and 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApproximate internal diameters:\u003c\/strong\u003e 1\/2\": approx. 12.5 mm; 3\/4\": approx. 19 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose fastening:\u003c\/strong\u003e Tool-free screw sleeve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\/orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat happens when the device is disconnected?\u003c\/h3\u003e\n\u003cp\u003eThe integrated water-stop valve closes the water passage when the device is disconnected.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my hose?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/2\" version is specified for an internal diameter of approximately 12.5 mm, while the 3\/4\" version is specified for approximately 19 mm.\u003c\/p\u003e\n\u003ch3\u003eHow is the connector fitted?\u003c\/h3\u003e\n\u003cp\u003eThe hose is secured with the screw sleeve, which is tightened by hand. No tools are required.\u003c\/p\u003e\n\u003ch3\u003eCan the connector be used with a lawn sprinkler?\u003c\/h3\u003e\n\u003cp\u003eYes, provided that the lawn sprinkler has a compatible click connection.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"1\/2 inch","offer_id":65814915121501,"sku":"1664-12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"3\/4 inch","offer_id":65815539155293,"sku":"1664-34","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchkupplungenjpg-12415484.jpg?v=1788694354"},{"product_id":"schlauchverbinder-1-2-3-4-auf-power-jet","title":"Adapter POWER JET to standard quick coupling – Bradas","description":"\u003cp\u003eThe Bradas ECO-PWB2202 connects a POWER JET quick-connect coupling to a standard quick-connect coupling. Its two different plug profiles provide the transition between the coupling systems.\u003c\/p\u003e\n\u003ch2\u003eConnect compatible plug profiles\u003c\/h2\u003e\n\u003cp\u003ePOWER JET and standard systems cannot be connected directly because their plug profiles differ. This adapter has the appropriate connection form for each side.\u003c\/p\u003e\n\u003ch2\u003eDistinguish hose size from coupling\u003c\/h2\u003e\n\u003cp\u003eThe adapter is inserted between the couplings. The hoses themselves are secured in the couplings' hose grips. Selection of the adapter therefore depends on the plug system; each hose coupling must also match the hose diameter.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e BLACK LINE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ECO-PWB2202\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug profiles:\u003c\/strong\u003e 1 × POWER JET and 1 × Standard\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Between two compatible quick-connect couplings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the hose pushed directly onto the connector?\u003c\/h3\u003e\n\u003cp\u003eNo. Compatible quick-connect couplings are required at both hose ends.\u003c\/p\u003e\n\u003ch3\u003eDoes a standard quick-connect coupling fit?\u003c\/h3\u003e\n\u003cp\u003eYes, on the standard side. The other side is designed for a POWER JET coupling.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815436067165,"sku":"1629","price":2.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchverbinder-pvcjpg-12415591.jpg?v=1788695586"},{"product_id":"schlauchverbinder-power-jet-3-4","title":"Double connector POWER JET for two quick couplings – Bradas","description":"\u003cp\u003eThe Bradas ECO-PWB2201 connects two hoses fitted with POWER JET quick-connect couplings. The double plug has the larger POWER JET plug profile on both sides.\u003c\/p\u003e\n\u003ch2\u003eConnect compatible plug profiles\u003c\/h2\u003e\n\u003cp\u003eBoth connected couplings must belong to the POWER JET system. Standard quick-connect couplings do not fit this double plug.\u003c\/p\u003e\n\u003ch2\u003eDistinguish hose size from coupling\u003c\/h2\u003e\n\u003cp\u003eThe connector is inserted between the couplings. The hoses themselves are secured in the couplings' hose grips. Selection of the connector therefore depends on the plug system; each hose coupling must also match the hose diameter.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e BLACK LINE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ECO-PWB2201\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug profiles:\u003c\/strong\u003e 2 × POWER JET\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Between two compatible quick-connect couplings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the hose pushed directly onto the connector?\u003c\/h3\u003e\n\u003cp\u003eNo. Compatible quick-connect couplings are required at both hose ends.\u003c\/p\u003e\n\u003ch3\u003eDoes a standard quick-connect coupling fit?\u003c\/h3\u003e\n\u003cp\u003eNo. Both sides are designed for POWER JET quick-connect couplings.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815436296541,"sku":"1630","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tsclientcusersstevedesktopsteckkupplungjpg-12415592.jpg?v=1788695589"},{"product_id":"y-schlauchverbinder-power-jet-3-4","title":"POWER-JET-Y distributor for two irrigation lines – Bradas","description":"\u003cp\u003eThe Bradas POWER-JET Y hose connector splits one irrigation line into two parallel lines. The inlet and outlets have POWER-JET plug ends that are inserted into compatible couplings at the hose ends.\u003c\/p\u003e\n\u003ch2\u003eOne inlet, two outlets\u003c\/h2\u003e\n\u003cp\u003eThe Y-shaped distributor routes one inlet to two outlets. The outlets cannot be shut off separately with this distributor.\u003c\/p\u003e\n\u003ch2\u003ePOWER-JET plug ends\u003c\/h2\u003e\n\u003cp\u003eThe three plug ends are inserted into compatible POWER-JET couplings at the hose ends. The POWER-JET series is compatible exclusively with POWER-JET components.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Y-distributor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug ends:\u003c\/strong\u003e 1 inlet and 2 outlets, each POWER-JET\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e Integrated rubber seals at the connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\/orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Push-fit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e POWER JET\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow are the three plug ends connected?\u003c\/h3\u003e\n\u003cp\u003eThe three plug ends of the Y-distributor are inserted into compatible POWER-JET couplings at the hose ends.\u003c\/p\u003e\n\u003ch3\u003eCan the distributor supply two lines?\u003c\/h3\u003e\n\u003cp\u003eYes. The inlet is split into two parallel outlets.\u003c\/p\u003e\n\u003ch3\u003eCan the two outlets be shut off separately?\u003c\/h3\u003e\n\u003cp\u003eNo. The Y-distributor has no shut-off valves.\u003c\/p\u003e\n\u003ch3\u003eAre standard couplings compatible?\u003c\/h3\u003e\n\u003cp\u003eNo. The distributor is intended for POWER-JET components; standard push-fit couplings from other series do not fit.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815436591453,"sku":"1631","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/y-schlauchverbinderjpg-12415593.jpg?v=1788695593"},{"product_id":"schlauchverbinder-3-4-aussengewinde-power-jet","title":"POWER JET Hose Connector with 3\/4-inch Male Thread","description":"\u003cp\u003eThis hose connector connects a hose with a POWER JET coupling to watering equipment, distributors or taps with a compatible 3\/4-inch female thread. The threaded side is screwed on permanently, while the hose connects via the POWER JET plug connection. Integrated seals help provide a reliable connection for permanently installed watering systems.\u003c\/p\u003e\n\u003ch2\u003eInstallation and connection\u003c\/h2\u003e\n\u003cp\u003eThe adapter is screwed into a compatible female thread using its 3\/4-inch male-thread side. The hose is then connected via the POWER JET plug connection and can be disconnected there when required. The threaded connection remains permanently installed on the appliance.\u003c\/p\u003e\n\u003ch2\u003eCompatible components\u003c\/h2\u003e\n\u003cp\u003eThe plug side is intended exclusively for POWER JET couplings. Before buying, check whether the existing hose system uses POWER JET components. The thread fits equipment with a corresponding 3\/4-inch female thread.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/4-inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug side:\u003c\/strong\u003e POWER JET\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant plastic, black\/orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fixed threaded installation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread seal:\u003c\/strong\u003e Rubber ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug-side seal:\u003c\/strong\u003e Integrated POWER JET seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich equipment fits the threaded side?\u003c\/h3\u003e\n\u003cp\u003eIt fits equipment with a 3\/4-inch female thread, such as compatible sprinklers, distributors or taps.\u003c\/p\u003e\n\u003ch3\u003eIs the plug side compatible with every hose coupling?\u003c\/h3\u003e\n\u003cp\u003eNo. The plug side is intended exclusively for POWER JET couplings.\u003c\/p\u003e\n\u003ch3\u003eCan the adapter be used on a tap?\u003c\/h3\u003e\n\u003cp\u003eYes, provided the tap has a compatible 3\/4-inch female thread. A tap without a thread also requires a suitable tap adapter.\u003c\/p\u003e\n\u003ch3\u003eAre seals included?\u003c\/h3\u003e\n\u003cp\u003eYes. The adapter has a rubber ring on the threaded side and an integrated seal on the POWER JET plug side.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815436919133,"sku":"1633","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/auengewinde-schlauchverbinderjpg-12415594.jpg?v=1788695597"},{"product_id":"bradas-tropfbewaesserungsset-50-m-tropfschlauch-und-67-zubehoerteile","title":"Drip irrigation kit, 50 m drip hose and 67 accessories – Bradas","description":"\u003cp\u003eThe 50 m drip hose and 67 accessories allow water supply to be arranged along rows of plants. The drippers are spaced 33 cm apart and each delivers 1.6 litres per hour at 1 bar. Hose stakes, elbows and T-pieces support installation in beds or greenhouses.\u003c\/p\u003e\n\u003ch2\u003eKit contents and installation\u003c\/h2\u003e\n\u003cp\u003eThe kit includes the 50 m hose, 40 hose stakes, 5 elbows, 10 T-pieces, 10 plugs, one tap adapter and one valve. The hose system has a nominal size of 16 mm; the hose wall is 1 mm thick. Plugs close open line ends, T-pieces connect branches and hose stakes secure the installed runs.\u003c\/p\u003e\n\u003ch2\u003eWater connection and operating pressure\u003c\/h2\u003e\n\u003cp\u003eThe tap adapter has a ½-inch female thread and the valve has a ½-inch male thread. Bradas specifies an operating pressure of 0.5 to 3.5 bar for the drip hose. If the supply pressure is higher, a suitable pressure reducer is required. With a pump, also check its delivery rate and connection compatibility. A watering timer is available separately.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHose length:\u003c\/strong\u003e 50 m\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e 67 parts in addition to the hose: 40 hose stakes, 5 elbows, 10 T-pieces, 10 plugs, 1 tap adapter and 1 valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDripper spacing:\u003c\/strong\u003e 33 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFlow rate:\u003c\/strong\u003e 1.6 l\/h per dripper at 1 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose and accessories:\u003c\/strong\u003e 16 mm nominal size, hose wall thickness 1 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTap adapter:\u003c\/strong\u003e 1\/2-inch female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e 1\/2-inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose stakes:\u003c\/strong\u003e 40 pieces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElbows:\u003c\/strong\u003e 5 pieces, each for 16 mm hose\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eT-pieces:\u003c\/strong\u003e 10 pieces, each for 16 mm hose\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlugs:\u003c\/strong\u003e 10 pieces, each for 16 mm hose\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrip hose operating pressure:\u003c\/strong\u003e 0.5–3.5 bar according to the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 50 m hose included in the 67 parts?\u003c\/h3\u003e\n\u003cp\u003eNo. The kit contains 50 m of drip hose plus 67 accessories: 40 stakes, 5 elbows, 10 T-pieces, 10 plugs, plus one tap adapter and one valve.\u003c\/p\u003e\n\u003ch3\u003eHow much water does the entire hose need approximately?\u003c\/h3\u003e\n\u003cp\u003e50 m of hose with 33 cm dripper spacing corresponds to roughly 150 drippers mathematically. At 1.6 l\/h each, this gives approximately 240 litres per hour at 1 bar. The actual water volume depends, among other things, on pressure distribution, line layout and the number of drippers used.\u003c\/p\u003e\n\u003ch3\u003eIs 1 bar the maximum permitted operating pressure?\u003c\/h3\u003e\n\u003cp\u003eNo. 1 bar is the reference pressure for the stated delivery of 1.6 l\/h per dripper. The manufacturer specifies an operating range of 0.5 to 3.5 bar for the drip hose.\u003c\/p\u003e\n\u003ch3\u003eHow should I lay the drip line between the plants?\u003c\/h3\u003e\n\u003cp\u003eRun the line along the rows to be watered and secure it with the stakes. Position the drippers so that water reaches the root area. Soil type and plant spacing affect how many line runs are appropriate.\u003c\/p\u003e\n\u003ch3\u003eCan a watering timer be connected?\u003c\/h3\u003e\n\u003cp\u003eYes, using a timer and, if necessary, adapters whose connections and pressure range suit the installation. The timer is not included.\u003c\/p\u003e\n\u003ch3\u003eHow do I make the kit ready for winter?\u003c\/h3\u003e\n\u003cp\u003eShut off the water supply and drain the hose, valve and connections before frost. Then protect open line ends from entering dirt.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815455924573,"sku":"4458","price":27.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tropfbewsserungssystem-12415743.jpg?v=1788696375"},{"product_id":"bradas-schlauchkupplung-fuer-1-2-und-5-8-zoll-schlaeuche-1-2-zoll-schnellkupplung","title":"Hose connector for 1\/2-inch and 5\/8-inch hoses, 1\/2-inch quick connector – Bradas","description":"\u003cp\u003eThis hose connector joins garden hoses with 1\/2 inch or 5\/8 inch, respectively approximately 13 mm or 16 mm, internal diameter, to a 1\/2-inch quick-connector system. Insert the hose end into the socket and secure it with the union nut. The connector is designed for tool-free connection of watering accessories.\u003c\/p\u003e\n\u003ch2\u003eFor two hose sizes\u003c\/h2\u003e\n\u003cp\u003eThe hose socket is designed for 1\/2-inch hoses with approximately 13 mm and 5\/8-inch hoses with approximately 16 mm internal diameter. The connector side uses a 1\/2-inch quick-connector connection.\u003c\/p\u003e\n\u003ch2\u003eDesign without water stop\u003c\/h2\u003e\n\u003cp\u003eThis connector has no integrated water stop. When it is disconnected, water therefore continues to flow unless a shut-off mechanism is fitted elsewhere.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Black Line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose socket:\u003c\/strong\u003e For 1\/2-inch and 5\/8-inch hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnector side:\u003c\/strong\u003e 1\/2-inch quick connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\/orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater stop:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hoses fit the connector?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for hoses with 1\/2 inch, respectively approximately 13 mm, or 5\/8 inch, respectively approximately 16 mm, internal diameter.\u003c\/p\u003e\n\u003ch3\u003eWhich connection does the connector side have?\u003c\/h3\u003e\n\u003cp\u003eThe connector side is designed for a 1\/2-inch quick-connector system.\u003c\/p\u003e\n\u003ch3\u003eAre tools required for installation?\u003c\/h3\u003e\n\u003cp\u003eNo. Insert the hose end and tighten the union nut by hand.\u003c\/p\u003e\n\u003ch3\u003eDoes the connector have a water stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This version has no stop function; disconnecting it does not automatically interrupt the water flow.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815499768157,"sku":"1579","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersarbeitsbedarf24picturesbilderbradasschlauchkupplungenjpg-12415460.jpg?v=1788694309"},{"product_id":"adapter-3-4-geraetestueck-aussengewinde","title":"Hose connector nipple WL-2185 with 3\/4-inch male thread – Bradas","description":"\u003cp\u003eThe Bradas WL-2185 adds a standard plug connection to watering equipment with a 3\/4-inch female thread. Once screwed in, a compatible hose coupling can be locked onto the nipple.\u003c\/p\u003e\n\u003ch2\u003eConvert a threaded connection to a plug system\u003c\/h2\u003e\n\u003cp\u003eThe threaded side has a 3\/4-inch male thread. It fits a corresponding female thread, for example on a sprinkler or garden shower.\u003c\/p\u003e\n\u003ch2\u003eChoose the hose coupling\u003c\/h2\u003e\n\u003cp\u003eThe opposite side has a nipple for the standard plug system. The corresponding coupling on the hose must have this plug profile, and its hose socket must match the hose diameter.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e WL-2185\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e WHITE LINE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 3\/4 inch, male\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug side:\u003c\/strong\u003e Standard plug nipple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the nipple fit a 3\/4-inch male thread?\u003c\/h3\u003e\n\u003cp\u003eNo. A compatible female thread is required for screwing it in.\u003c\/p\u003e\n\u003ch3\u003eWhat does 3\/4 inch refer to?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the screw thread on the nipple, not to the connected garden hose.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815508320605,"sku":"1636","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/gerteadapterjpg-12415470.jpg?v=1788694330"},{"product_id":"bradas-gummidichtungsringe-fuer-geka-kompatible-schlauchkupplungen","title":"Rubber Sealing Rings for GEKA-Compatible Hose Couplings – Bradas","description":"\u003cp\u003eBradas rubber sealing rings replace worn or hardened seals in GEKA-compatible hose couplings. The ring is placed in the designated groove and can be replaced without tools. This restores suitable hose connections for irrigation, workshop use and other applications.\u003c\/p\u003e\n\u003ch2\u003eReplacing the Seal\u003c\/h2\u003e\n\u003cp\u003eTo replace the ring, first remove the old ring from the coupling. The groove should be free from dirt and residue before fitting the new seal. The coupling can then be reconnected; sealing performance also depends on the condition of the coupling and correct installation.\u003c\/p\u003e\n\u003ch2\u003eMaterial and Use\u003c\/h2\u003e\n\u003cp\u003eThe flexible rubber forms the sealing surface inside the coupling. When replacing it, check the fit and condition of the seating areas. Damaged coupling components may still leak even with a new sealing ring.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Rubber sealing ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GEKA-compatible quick-release couplings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free fitting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e Flexible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich couplings are the rings designed for?\u003c\/h3\u003e\n\u003cp\u003eThey are designed for GEKA-compatible quick-release couplings. Before fitting, compare the design with the existing coupling.\u003c\/p\u003e\n\u003ch3\u003eHow is the sealing ring replaced?\u003c\/h3\u003e\n\u003cp\u003eRemove the old ring from the groove, clean the seating area and fit the new ring correctly. This normally requires no tools.\u003c\/p\u003e\n\u003ch3\u003eWhen should the seal be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplacement is advisable when the ring has hardened or become damaged, or when the coupling leaks despite being correctly connected.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815544365405,"sku":"1261","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941870.jpg?v=1788693634"},{"product_id":"bradas-druckluftkupplung-mit-aussengewinde","title":"Pneumatic coupling with male thread – Bradas","description":"\u003cp\u003eThis pneumatic coupling is screwed into a matching female thread on a compressor, manifold or permanently installed line. The hose or tool's plug-in nipple can then be inserted and secured with the spring locking mechanism. It is available in 1\/4, 3\/8 and 1\/2 inch.\u003c\/p\u003e\n\u003ch2\u003eFitting to a female thread\u003c\/h2\u003e\n\u003cp\u003eThe male thread is intended for components with a matching female thread. Before fitting, ensure that the thread size and sealing method match the existing connection. The coupling then forms the fixed counterpart for a compatible plug-in nipple.\u003c\/p\u003e\n\u003ch2\u003eQuick changes in the pneumatic system\u003c\/h2\u003e\n\u003cp\u003eConnect and disconnect a hose or tool using the matching plug-in nipple. The integrated spring locking mechanism holds the inserted connection during use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/4, 3\/8 and 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling type:\u003c\/strong\u003e Quick coupling with spring locking mechanism\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoupling body:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCounterpart:\u003c\/strong\u003e Matching plug-in nipple\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Compressor connection, pneumatic manifold, workshop installation and pneumatics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is the coupling with male thread fitted?\u003c\/h3\u003e\n\u003cp\u003eIt is screwed into a matching female thread, for example at a compressor outlet, manifold or T-piece.\u003c\/p\u003e\n\u003ch3\u003eWhich thread sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe options are 1\/4, 3\/8 and 1\/2 inch. The size of the existing female thread is decisive.\u003c\/p\u003e\n\u003ch3\u003eWhich connection fits into the coupling?\u003c\/h3\u003e\n\u003cp\u003eUse a compatible plug-in nipple from the corresponding coupling system and with the matching nominal size.\u003c\/p\u003e\n\u003ch3\u003eHow does this version differ from a coupling with a female thread?\u003c\/h3\u003e\n\u003cp\u003eThe male-thread version is screwed into a female thread. A female-thread coupling is instead fitted onto a male thread.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"1\/4\"","offer_id":65819467252061,"sku":"2004-1\/4","price":3.49,"currency_code":"EUR","in_stock":false},{"title":"3\/8\"","offer_id":65819467284829,"sku":"2004-3\/8","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"1\/2\"","offer_id":65817588564317,"sku":"2004-1\/2","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersarbeitsbedarf24picturesbilderbradasdruckluftkupplung-auengewindejpg-12404027.jpg?v=1788694895"},{"product_id":"bradas-druckluftkupplung-mit-innengewinde-und-stecknippel","title":"Pneumatic coupling with female thread and plug-in nipple – Bradas","description":"\u003cp\u003eThis compact pneumatic coupling combines a female thread with a plug-in nipple. It is screwed onto a matching male thread and provides a detachable plug-in connection to a compatible quick coupling on the other side. It is available in 1\/4, 3\/8 and 1\/2 inch and is suitable for confined installation spaces.\u003c\/p\u003e\n\u003ch2\u003eTwo connection types in one component\u003c\/h2\u003e\n\u003cp\u003eThe female thread accepts a matching threaded connection on a hose, tool or manifold. The plug-in nipple is then inserted into a compatible quick coupling. This allows the component to bridge a threaded connection and a plug-in connection.\u003c\/p\u003e\n\u003ch2\u003eCompact design\u003c\/h2\u003e\n\u003cp\u003eThe space-saving design is intended for installations where a longer or multi-part connection would be inconvenient. Check the thread size and coupling profile of the existing pneumatic system before fitting.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection side 1:\u003c\/strong\u003e Female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection side 2:\u003c\/strong\u003e Plug-in nipple for quick coupling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/4, 3\/8 and 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Compact and space-saving\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Pneumatic tools, workshop installation, automotive operations, industrial pneumatics and adapter applications\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the combination of female thread and plug-in nipple work?\u003c\/h3\u003e\n\u003cp\u003eScrew the female thread onto a matching male thread. Insert the plug-in nipple on the other side into a compatible quick coupling.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my tool?\u003c\/h3\u003e\n\u003cp\u003eCheck the existing thread on the tool or connecting component. The available sizes are 1\/4, 3\/8 and 1\/2 inch.\u003c\/p\u003e\n\u003ch3\u003eCan the coupling be used as an adapter?\u003c\/h3\u003e\n\u003cp\u003eYes, the combination of female thread and plug-in nipple bridges a suitable threaded connection and a quick coupling.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eCompare the required thread size and plug-in nipple profile with the connections on your pneumatic system.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"1\/2\"","offer_id":65817588924765,"sku":"2005-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"3\/8\"","offer_id":65819467317597,"sku":"2005-3\/8","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"1\/4\"","offer_id":65819467350365,"sku":"2005-1\/4","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/druckluftkupplung-innengewinde-mit-stecknippeljpg-12404031.jpg?v=1788694901"},{"product_id":"bradas-schlauchschelle-w1-aus-glanzverzinktem-stahl","title":"W1 hose clamp made from bright zinc-plated steel – Bradas","description":"\u003cp\u003eThe W1 hose clamp secures hoses and flexible lines using a worm-drive housing and slotted screw. The smooth band with rounded edges supports even contact with the hose. Depending on the version, 9 or 12 mm band widths and clamping ranges from 8 to 260 mm are available.\u003c\/p\u003e\n\u003ch2\u003eFitting with a slotted screwdriver\u003c\/h2\u003e\n\u003cp\u003ePosition the clamp over the hose connection and tighten the slotted screw gradually. The worm-drive housing guides the band around the hose. Tension the clamp evenly and avoid overtightening, which could damage the hose material.\u003c\/p\u003e\n\u003ch2\u003eChoose the band width and size\u003c\/h2\u003e\n\u003cp\u003eThe 9 mm version is intended for smaller and medium diameters. For larger hoses, the 12 mm band width can distribute the contact pressure more broadly. The actual outside diameter and the clamping range of the selected version are decisive.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e W1 hose clamp with worm-drive housing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bright zinc-plated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBand widths:\u003c\/strong\u003e 9 mm or 12 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClamping ranges:\u003c\/strong\u003e 25 sizes with clamping ranges within 8 to 260 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScrew:\u003c\/strong\u003e Slotted screw\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInner surface of band:\u003c\/strong\u003e Smooth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEdges:\u003c\/strong\u003e Rounded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacture:\u003c\/strong\u003e Made in one piece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does W1 mean for this hose clamp?\u003c\/h3\u003e\n\u003cp\u003eHere, W1 refers to the version made from bright zinc-plated steel.\u003c\/p\u003e\n\u003ch3\u003eHow do I find the right size?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameter of the assembled connection and choose a clamping range that covers this value.\u003c\/p\u003e\n\u003ch3\u003eWhich tool is required?\u003c\/h3\u003e\n\u003cp\u003eA slotted screwdriver is sufficient for tightening and loosening.\u003c\/p\u003e\n\u003ch3\u003eWhen is the 12 mm version useful?\u003c\/h3\u003e\n\u003cp\u003eThe 12 mm band width is intended for larger hose diameters and can distribute the contact pressure more broadly.\u003c\/p\u003e\n\u003ch3\u003eCan the clamp be used outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe bright zinc plating provides corrosion protection for normal applications. Suitability should be checked separately for continuous moisture, salty air or aggressive media.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"140-160 mm \/ 12 mm","offer_id":65819469513053,"sku":"2013-140x160\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"150-170 mm \/ 12 mm","offer_id":65819469545821,"sku":"2013-150x170\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"160-180 mm \/ 12 mm","offer_id":65819469578589,"sku":"2013-160x180\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"170-200 mm \/ 12 mm","offer_id":65819469611357,"sku":"2013-170x200\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"190-220 mm \/ 12 mm","offer_id":65819469644125,"sku":"2013-190x220\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"80-100mm \/ 12 mm","offer_id":65819469218141,"sku":"2013-80x100\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"90-110 mm \/ 12 mm","offer_id":65819469250909,"sku":"2013-90x110\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"210-240 mm \/ 12 mm","offer_id":65819469283677,"sku":"2013-210x240\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"130-150 mm \/ 12 mm","offer_id":65819469316445,"sku":"2013-130x150\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"230-260 mm \/ 12 mm","offer_id":65819469349213,"sku":"2013-230x260\/12","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"70-90 mm \/ 12 mm","offer_id":65819468628317,"sku":"2013-70x90\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"32-50 mm \/ 12 mm","offer_id":65819468661085,"sku":"2013-32x50\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"110-130 mm \/ 12 mm","offer_id":65819468693853,"sku":"2013-110x130\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"120-140 mm \/ 12 mm","offer_id":65819468726621,"sku":"2013-120x140\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"60-80 mm \/ 9 mm","offer_id":65819468136797,"sku":"2013-60x80\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"70-90 mm \/ 9 mm","offer_id":65819468169565,"sku":"2013-70x90\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"40-60 mm \/ 12 mm","offer_id":65819468202333,"sku":"2013-40x60\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"50-70 mm \/ 12 mm","offer_id":65819468235101,"sku":"2013-50x70\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"60-80 mm \/ 12 mm","offer_id":65819468267869,"sku":"2013-60x80\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"90-110 mm \/ 9 mm","offer_id":65819467809117,"sku":"2013-90x110\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"40-60 mm \/ 9 mm","offer_id":65819467841885,"sku":"2013-40\/60\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"50-70 mm \/ 9 mm","offer_id":65819467874653,"sku":"2013-50x70\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"25-40 mm \/ 12 mm","offer_id":65819467907421,"sku":"2013-25x40\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"16-25 mm \/ 12 mm","offer_id":65819467940189,"sku":"2013-16x25\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"20-32 mm \/ 9 mm","offer_id":65819467579741,"sku":"2013-20x32\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"11-18 mm \/ 9 mm","offer_id":65819467612509,"sku":"2013-11x18\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"12-22 mm \/ 9 mm","offer_id":65819467645277,"sku":"2013-12x22\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"80-100mm \/ 9 mm","offer_id":65819467678045,"sku":"2013-80x100\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"20-32 mm \/ 12 mm","offer_id":65819467710813,"sku":"2013-20x32\/12","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"32-50 mm \/ 9 mm","offer_id":65819467383133,"sku":"2013-32x50\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"25-40 mm \/ 9 mm","offer_id":65819467415901,"sku":"2013-25x40\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"16-25 mm \/ 9 mm","offer_id":65819467448669,"sku":"2013-16x25\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"8-12 mm \/ 9 mm","offer_id":65819467481437,"sku":"2013-8x12\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"10-16 mm \/ 9 mm","offer_id":65819467514205,"sku":"2013-10x16\/9","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"100-120 mm \/ 12 mm","offer_id":65817589514589,"sku":"2013-100x120\/12","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersarbeitsbedarf24picturesbilderbradasschlauchschellen-w1jpg-12404044.jpg?v=1788694907"},{"product_id":"druckluftkupplung-aussengewinde-mit-stecknippel-system","title":"Compressed-air coupling made of chrome-plated steel with male thread – Bradas","description":"\u003cp\u003eThe Bradas compressed-air coupling made of chrome-plated steel has a male thread and a plug-in side. Thread sizes of 1\/4, 3\/8 and 1\/2 inch are available. Both the thread and plug-in profile must match the existing compressed-air system components.\u003c\/p\u003e\n\u003ch2\u003eCheck the connection before ordering\u003c\/h2\u003e\n\u003cp\u003eThe male thread requires a matching female thread on the compressor, compressed-air tool or distributor. The thread type and inch size must match. Available sizes are 1\/4, 3\/8 and 1\/2 inch.\u003c\/p\u003e\n\u003ch2\u003eChrome-plated steel body\u003c\/h2\u003e\n\u003cp\u003eThe connector body is made of chrome-plated steel. The smooth surface can be cleaned when required. Keep the connection surfaces clean before connecting compatible components.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome-plated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlug-in system:\u003c\/strong\u003e Plug-in connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/4 inch, 3\/8 inch and 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Compressed-air lines, compressors, compressed-air tools and distributors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich thread does the counterpart require?\u003c\/h3\u003e\n\u003cp\u003eThe male thread is screwed into a female thread of the same inch size. The thread type and size must match.\u003c\/p\u003e\n\u003ch3\u003eHow is the compressed-air line connected?\u003c\/h3\u003e\n\u003cp\u003eThe plug-in side and its counterpart must match. Check the specific plug-in profile before use.\u003c\/p\u003e\n\u003ch3\u003eWhich sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe compressed-air coupling is available in 1\/4 inch, 3\/8 inch and 1\/2 inch.\u003c\/p\u003e\n\u003ch3\u003eIs the coupling suitable for every compressed-air device?\u003c\/h3\u003e\n\u003cp\u003eOnly if the connection type, inch size and plug-in profile match the device and existing system.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"3\/8\"","offer_id":65819447525725,"sku":"2123-3\/8","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"1\/4\"","offer_id":65819447558493,"sku":"2123-1\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"1\/2\"","offer_id":65817591644509,"sku":"2123-1\/2","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersarbeitsbedarf24picturesbilderbradasdruckluftkupplung-stahljpg-12404642.jpg?v=1788695194"},{"product_id":"verto-schlauchkupplung-1-2-und-5-8-zoll-mit-oder-ohne-wasserstopp","title":"VERTO Hose Connector 1\/2 and 5\/8 Inch with or without Water Stop","description":"\u003cp\u003eThe VERTO hose connector accepts garden hoses with an internal diameter of 1\/2 or 5\/8 inch. Both hose sizes fit the same connector type. Versions with and without water stop are available. The click profile must match the connected watering attachment.\u003c\/p\u003e\n\u003ch2\u003eTwo connection sizes\u003c\/h2\u003e\n\u003cp\u003eThe connector is designed for hoses with 1\/2- and 5\/8-inch internal diameters. Before fitting, compare the diameter of the hose with the selected connector.\u003c\/p\u003e\n\u003ch2\u003eWith or without water stop\u003c\/h2\u003e\n\u003cp\u003eThe stop version interrupts the water flow when disconnected. With the version without a stop, the water flow generally continues when the connector is pulled off.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Verto\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Quick connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible hose internal diameter:\u003c\/strong\u003e 1\/2 or 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVersions:\u003c\/strong\u003e With water stop or without water stop\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting:\u003c\/strong\u003e Tool-free click system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hose internal diameter is the connector designed for?\u003c\/h3\u003e\n\u003cp\u003eThe connector is designed for hoses with a 1\/2- or 5\/8-inch internal diameter.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the versions with and without a stop?\u003c\/h3\u003e\n\u003cp\u003eThe stop version interrupts the water flow when disconnected. Without a stop, the water flow generally continues when the connector is pulled off.\u003c\/p\u003e\n\u003ch3\u003eIs any tool required for fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. The click system is designed for tool-free fitting.\u003c\/p\u003e\n\u003ch3\u003eWhat should be checked when choosing an attachment?\u003c\/h3\u003e\n\u003cp\u003eThe attachment's click profile must match the connector. The hose size alone does not define the plug-in profile.\u003c\/p\u003e","brand":"VERTO","offers":[{"title":"without water stop","offer_id":65819429634397,"sku":"2629-1","price":1.99,"currency_code":"EUR","in_stock":true},{"title":"with water stop","offer_id":65817601507677,"sku":"2629-2","price":1.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchkupplungjpg-12415711.jpg?v=1788695931"},{"product_id":"bradas-pe-t-stueck-mit-reduzierung-25-20-bis-32-25-mm","title":"PE reducing tee, 25\/20 to 32\/25 mm – Bradas","description":"\u003cp\u003eThe Bradas tee connects a continuous PE main line to a smaller branch. The branch and reduction are combined in one fitting, eliminating an additional connection point.\u003c\/p\u003e\n\u003ch2\u003eConnections and variants\u003c\/h2\u003e\n\u003cp\u003eThe main-line passage is 25 or 32 mm, depending on the version. The reduced branch is 20 or 25 mm. Available variants are 25×20×25, 32×20×32 and 32×25×32 mm.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp\u003eInsert the PE pipes and tighten the three union nuts by hand. The integrated O-rings seal the connections. The fitting is suitable for garden irrigation, distribution pipes, lawn sprinklers and drip irrigation, as well as above-ground and underground installation.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Reducing tee\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality plastic, T-shaped\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain passage:\u003c\/strong\u003e 25 or 32 mm, depending on the variant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBranch:\u003c\/strong\u003e 20 or 25 mm, reduced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 25×20×25, 32×20×32 and 32×25×32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nuts:\u003c\/strong\u003e 3 pieces, suitable for hand tightening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e 3 integrated O-rings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e UV-resistant, weather-resistant and corrosion-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Above-ground and underground installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich pipe measurements do I need to compare?\u003c\/h3\u003e\n\u003cp\u003eThe specifications refer to the outside diameter of the PE pipe. Available versions are 25 × 20 × 25, 32 × 20 × 32 and 32 × 25 × 32 mm. The two matching measurements belong to the continuous main line.\u003c\/p\u003e\n\u003ch3\u003eWhat does 32×20×32 mm mean?\u003c\/h3\u003e\n\u003cp\u003eThe two outer 32 mm measurements indicate the passage of the main line. The middle 20 mm measurement indicates the reduced branch.\u003c\/p\u003e\n\u003ch3\u003eDoes the tee divide the water volume evenly?\u003c\/h3\u003e\n\u003cp\u003eNo. Distribution depends on pipe diameter, line length, changes in height and connected consumers. The reduced branch does not replace flow or pressure regulation.\u003c\/p\u003e\n\u003ch3\u003eIs additional sealant required?\u003c\/h3\u003e\n\u003cp\u003eNo. The three integrated O-rings are intended to seal the connections.\u003c\/p\u003e\n\u003ch3\u003eCan the tee be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The fitting is specified for above-ground and underground installation.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32x20x32 mm","offer_id":65819254653277,"sku":"3513-2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32x25x32 mm","offer_id":65819254686045,"sku":"3513-3","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25x20x25 mm","offer_id":65817630146909,"sku":"3513-1","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-fr-verlegerohr-12298446.jpg?v=1788698242"},{"product_id":"bradas-90-winkel-fuer-pe-rohre-mit-innengewinde","title":"90° elbow for PE pipes with female thread – Bradas","description":"\u003cp\u003eThis Bradas PE pipe elbow turns a line through 90° while providing a threaded connection. A PE pipe is secured by compression on one side; the female thread on the other accepts a matching male thread. Nine combinations connect pipe diameters from 20 to 50 mm with threads from ½ to 1½ inch.\u003c\/p\u003e\n\u003ch2\u003eChange of direction with threaded transition\u003c\/h2\u003e\n\u003cp\u003eThe elbow allows a fitting to be connected without tightly bending the pipe to change direction. It is suitable for appropriately designed irrigation and distribution systems.\u003c\/p\u003e\n\u003ch2\u003eConnection sides and dimensions\u003c\/h2\u003e\n\u003cp\u003eThe millimetre measurement refers to the PE pipe outside diameter. The inch designation identifies the female thread for the mating component. Select both measurements separately; a larger nominal thread size does not change the stated PE compression size.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eCut the pipe straight, clean the cut edge and prepare it according to the installation instructions. Loosen the union nut, insert the pipe fully into the matching compression socket and tighten the nut according to the manufacturer’s instructions. The compression ring holds the pipe; the O-ring provides the seal.\u003c\/p\u003e\n\u003ch2\u003eSeal and material\u003c\/h2\u003e\n\u003cp\u003eThe housing is made from impact-resistant, corrosion-resistant plastic. No additional thread sealant is required on the PE side. Sealing at the threaded connection depends on its design and mating component; use only sealing compounds suitable for this plastic connection.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAngle:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe diameter:\u003c\/strong\u003e 20–50 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInlet side:\u003c\/strong\u003e Compression connection for PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlet side:\u003c\/strong\u003e BSP female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2\" to 6\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring on the compression side\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Corrosion-resistant, Removable PE compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvailable combinations:\u003c\/strong\u003e 20 mm–1\/2\", 20 mm–3\/4\", 25 mm–1\/2\", 25 mm–3\/4\", 25 mm–1\", 32 mm–3\/4\", 32 mm–1\", 40 mm–5\/4\", 50 mm–6\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden irrigation, Distribution systems, Agriculture, Domestic connections, Greenhouses, Pool systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich dimensions should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eCheck the PE pipe outside diameter and the nominal thread size of the component to be connected. For example, 25 mm \/ ¾ inch means a compression socket for 25 mm pipe and a ¾-inch female thread.\u003c\/p\u003e\n\u003ch3\u003eIs a 1-inch thread exactly 25.4 mm?\u003c\/h3\u003e\n\u003cp\u003eThe inch designation for pipe threads is a nominal size. It cannot be converted into the measured thread diameter by multiplying by 25.4. Use the mating component’s thread specification or a suitable thread table.\u003c\/p\u003e\n\u003ch3\u003eDoes the pipe compression side also need PTFE tape?\u003c\/h3\u003e\n\u003cp\u003eNo. The O-ring seals the pipe side. Seal the threaded connection separately according to its design; sealing material does not belong in the PE compression socket.\u003c\/p\u003e\n\u003ch3\u003eCan I install the elbow underground after assembly?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for underground installation. Check the assembled connection for leaks before backfilling and install the line without stress. Frost protection must suit the system and local conditions.\u003c\/p\u003e\n\u003ch3\u003eWill a flexible garden hose fit in the PE compression socket?\u003c\/h3\u003e\n\u003cp\u003eThe compression socket is intended for PE irrigation pipe with the matching outside diameter. A soft garden hose needs a suitable connector.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm - 1\"","offer_id":65819247935837,"sku":"4332-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65819248755037,"sku":"4332-40-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65819248787805,"sku":"4332-50-6\/4","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65819247804765,"sku":"4332-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65819247837533,"sku":"4332-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65819247870301,"sku":"4332-25-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 3\/4\"","offer_id":65819247903069,"sku":"4332-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2","offer_id":65817650200925,"sku":"4332-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65819247182173,"sku":"4332-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkel-schlauchverbinder-innengewinde-12298646.jpg?v=1788699201"},{"product_id":"bradas-t-stueck-fuer-pe-rohre-mit-innengewinde","title":"T-piece for PE pipes with female thread – Bradas","description":"\u003cp\u003eThe Bradas T-piece adds a lateral female-threaded connection to a PE line. The main line continues through the two straight PE compression sides. Suitable valves, outlet taps or other male-threaded components can be connected to the 90° branch.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eThe straight connections secure the PE pipes with compression rings and union nuts. O-rings seal at the pipes. The lateral BSP female thread forms a separate threaded connection.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFor retrofitting, isolate and depressurise the line. Allow for the installation length and required insertion depths, prepare the pipe ends and secure them according to the installation instructions. Seal the threaded side using a method suitable for its design and this plastic connection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and resistance\u003c\/h2\u003e\n\u003cp\u003eThe plastic housing is corrosion-resistant and intended for underground installation. If fertiliser or other substances are added to the irrigation water, check their compatibility with all components at the concentration used.\u003c\/p\u003e\n\u003ch2\u003eVariants and applications\u003c\/h2\u003e\n\u003cp\u003eTen size combinations cover PE pipe diameters from 20 to 50 mm and nominal thread sizes from ½ to 1½ inch. Select the version according to the existing connections and the irrigation system design.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e T-piece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e T-shaped, 90° branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe diameter:\u003c\/strong\u003e 20–50 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e BSP female thread on the lateral branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2 inch–6\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 10 size combinations\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Pressure-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThrough connection:\u003c\/strong\u003e 2 compression connections for PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBranch:\u003c\/strong\u003e Female thread for male-threaded components\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e O-rings on the PE compression connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Removable compression connections on the PE pipe sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e Corrosion-resistant; check compatibility with water additives for the application\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Irrigation, gardening and landscaping, draw-off points, agriculture, drainage and greenhouses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan a pressure gauge be connected directly?\u003c\/h3\u003e\n\u003cp\u003eIf its connection has a male thread matching the version, it can be fitted to the lateral female thread. The nominal thread size, thread type and sealing design must match.\u003c\/p\u003e\n\u003ch3\u003eHow much pipe must I remove for retrofitting?\u003c\/h3\u003e\n\u003cp\u003eThis depends on the T-piece installation length and the insertion depths of its compression sockets. Before cutting, follow the installation instructions and check the actual dimensions; do not use a standard spacing.\u003c\/p\u003e\n\u003ch3\u003eDo the O-rings also seal the threaded side?\u003c\/h3\u003e\n\u003cp\u003eThe stated O-rings are located at the PE compression connections. The threaded side needs sealing suited to its design. The pipe seals do not indicate sealing for the connected fitting.\u003c\/p\u003e\n\u003ch3\u003eCan I pass any liquid fertiliser through the T-piece?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the product and its concentration. For metered additives, check the approvals for the fitting, pipe and other system components.\u003c\/p\u003e\n\u003ch3\u003eIs the size selected solely according to garden area?\u003c\/h3\u003e\n\u003cp\u003eNo. The pipe diameter and nominal thread size must match the connections. Water quantity, pipe route and pressure losses form part of system planning.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm - 1\"","offer_id":65819249672541,"sku":"4334-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65819250590045,"sku":"4334-40-5\/4","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65819250622813,"sku":"4334-50-6\/4","price":4.49,"currency_code":"EUR","in_stock":false},{"title":"25 mm - 3\/4\"","offer_id":65819249574237,"sku":"4334-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65819249607005,"sku":"4334-25-1","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"32 mm - 3\/4\"","offer_id":65819249639773,"sku":"4334-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 1\"","offer_id":65819249705309,"sku":"4334-40-1","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2\"","offer_id":65817650954589,"sku":"4334-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65819248820573,"sku":"4334-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"25 mm - 1\/2\"","offer_id":65819248853341,"sku":"4334-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-innengewinde-12298669.jpg?v=1788699215"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-bereich-garten-verbinder.jpg?v=1789138915","url":"https:\/\/brixoro.eu\/en-pt\/collections\/irrigation-fittings-and-connectors.oembed?page=4","provider":"Brixoro","version":"1.0","type":"link"}