{"title":"Irrigation pipes","description":"\u003cp\u003eIrrigation pipes form the permanent runs of an irrigation system. Choose them only once the route, zones, flow requirements and connection system have been established; a diameter alone does not define a complete system.\u003c\/p\u003e\n\u003ch2\u003ePlan the pipe layout before listing materials\u003c\/h2\u003e\n\u003cp\u003eDraw the source, main line, branches, valves and endpoints to scale or with lengths marked. Mark changes in elevation, paths, roots and points that must remain accessible later. Every bend, branch and restriction affects the system. For long or heavily branched runs, pipe sizing should be professionally calculated based on the required flow and permissible pressure losses.\u003c\/p\u003e\n\u003cdiv class=\"table-scroll\" role=\"region\" aria-label=\"Checklist for irrigation pipes in irrigation systems\" tabindex=\"0\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePlanning area\u003c\/th\u003e\n\u003cth\u003eWhat to document\u003c\/th\u003e\n\u003cth\u003eWhy it matters\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe\u003c\/td\u003e\n\u003ctd\u003eExternal and internal dimensions specified for the system, material, permissible operating range\u003c\/td\u003e\n\u003ctd\u003eConnectors and hydraulic calculations rely on defined dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eSystem, insertion depth, seal, assembly instructions\u003c\/td\u003e\n\u003ctd\u003eSimilar diameters are not automatically compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoute\u003c\/td\u003e\n\u003ctd\u003eLength, elevation, bends and branches\u003c\/td\u003e\n\u003ctd\u003eDetermines pressure loss and material requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003eIsolation, drainage, flushing and testing points\u003c\/td\u003e\n\u003ctd\u003eMakes commissioning and seasonal maintenance easier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eDo not equate pipe dimensions with thread sizes\u003c\/h2\u003e\n\u003cp\u003eDepending on the type of pipe system, the stated dimension may refer to the external or internal diameter. Threads follow their own standards and naming conventions. Always take dimensions from the system specifications for the exact pipe and connector. Mixed installations require explicitly compatible adapters; “almost the same” does not provide a reliable fit for sealing surfaces and push-fit connections.\u003c\/p\u003e\n\u003ch2\u003eBefore backfilling the trench\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClean and prepare pipe ends as instructed\u003c\/li\u003e\n\u003cli\u003eFully assemble connections and flush the line\u003c\/li\u003e\n\u003cli\u003eCheck the section for leaks under the intended operating conditions\u003c\/li\u003e\n\u003cli\u003eKeep valves, filters and detachable adapters accessible\u003c\/li\u003e\n\u003cli\u003ePhotograph the pipe route and record dimensions for future work\u003c\/li\u003e\n\u003cli\u003eImplement frost protection and drainage measures according to the manufacturer's instructions and system requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor zones and end devices, visit \u003ca href=\"\/en\/collections\/bewasserungssystem\"\u003eIrrigation systems and accessories\u003c\/a\u003e. Find suitable adapters under \u003ca href=\"\/en\/collections\/bewaesserungsanschluesse\"\u003eIrrigation fittings and connections\u003c\/a\u003e; for the winter shutdown, see \u003ca href=\"\/en\/blogs\/ratgeber\/gartenbewaesserung-winterfest\"\u003eWinterising your garden irrigation system\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"tams-verlegerohr-100-m-aus-pe","title":"TAMS 100 m PE irrigation pipe","description":"\u003cp\u003eThe TAMS PE irrigation pipe forms a main line for garden, drip and sprinkler irrigation. The 100 m roll is available with an outside diameter of 16, 20, 25 or 32 mm. The flexible, UV-stabilised pipe is designed for a working pressure of up to 4 bar.\u003c\/p\u003e\n\u003ch2\u003eLaying and connection\u003c\/h2\u003e\n\u003cp\u003eThe pipe can be used as a main line. Suitable connectors for the relevant outside diameter are required for installation. Observe the manufacturer’s specified minimum bending radius on tight curves and avoid kinks.\u003c\/p\u003e\n\u003ch2\u003ePressure and temperature\u003c\/h2\u003e\n\u003cp\u003eWorking pressure, burst pressure and dimensional stability are different specifications. The burst pressure of up to 17 bar at 20 °C is not an approved operating pressure; the temperature specification is not a general pressure approval.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e TAMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised PE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePack contents:\u003c\/strong\u003e 100 m roll\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutside diameter:\u003c\/strong\u003e 16 \/ 20 \/ 25 \/ 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e Up to 4 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBurst pressure:\u003c\/strong\u003e Up to 17 bar at 20 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensional stability:\u003c\/strong\u003e Up to 40 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Drip, sprinkler and garden irrigation, agriculture, greenhouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich pipe sizes are available?\u003c\/h3\u003e\n\u003cp\u003e16, 20, 25 and 32 mm outside diameter.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure is it designed for in operation?\u003c\/h3\u003e\n\u003cp\u003eUp to 4 bar working pressure and up to 17 bar burst pressure at 20 °C. Burst pressure is not an approved operating pressure.\u003c\/p\u003e\n\u003ch3\u003eCan the pipe be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes, the pipe is suitable for underground installation. Observe the minimum bending radius and installation instructions; avoid kinks and use suitable angle connectors for tight changes of direction.\u003c\/p\u003e\n\u003ch3\u003eHow is the pipe connected?\u003c\/h3\u003e\n\u003cp\u003eUsing PE connectors or compression fittings that match the relevant outside diameter.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for drinking water?\u003c\/h3\u003e\n\u003cp\u003eNo drinking-water approval is specified.\u003c\/p\u003e","brand":"TAMS","offers":[{"title":"25mm","offer_id":65815400055133,"sku":"2967-25","price":104.99,"currency_code":"EUR","in_stock":true},{"title":"32mm","offer_id":65815400087901,"sku":"2967-32","price":136.49,"currency_code":"EUR","in_stock":true},{"title":"40mm","offer_id":65815400120669,"sku":"2967-40","price":199.99,"currency_code":"EUR","in_stock":false},{"title":"16mm","offer_id":65814953001309,"sku":"2967-16","price":31.49,"currency_code":"EUR","in_stock":true},{"title":"20mm","offer_id":65815399858525,"sku":"2967-20","price":41.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/verlegerohr-12298393.jpg?v=1788696704"},{"product_id":"bradas-erdanker-fuer-bewaesserungsschlaeuche-bis-16-mm-100-stueck","title":"Ground pegs for irrigation hoses up to 16 mm, 100 pieces – Bradas","description":"\u003cp\u003eThese U-shaped ground pegs secure drip, soaker and thin irrigation hoses up to 16 mm in the soil. Press the pegs into the ground by hand to keep the hose in position along plant rows, in raised beds or in a greenhouse. The pack contains 100 pieces.\u003c\/p\u003e\n\u003ch2\u003eSecure hoses neatly\u003c\/h2\u003e\n\u003cp\u003ePlace the hose in the U-shaped peg and then fix the peg in the soil. Straight runs can use wider spacing; curves, slopes and transitions benefit from closer spacing.\u003c\/p\u003e\n\u003ch2\u003eInstallation in the soil\u003c\/h2\u003e\n\u003cp\u003eThe pegs can be installed without tools in normal garden soil. Very hard or stony ground may make installation more difficult and may need preparation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e U-shaped ground peg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum hose outside dimension:\u003c\/strong\u003e Up to 16 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 100 pieces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e For pressing into the soil\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Drip hoses, soaker hoses, irrigation hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hose dimensions fit the ground pegs?\u003c\/h3\u003e\n\u003cp\u003eThe suitable hose size must be checked against the actual outside dimension; the stated capacity is up to 16 mm.\u003c\/p\u003e\n\u003ch3\u003eHow are the pegs installed?\u003c\/h3\u003e\n\u003cp\u003ePlace the hose in the U-shaped peg and press the peg into the ground by hand.\u003c\/p\u003e\n\u003ch3\u003eHow many pegs are needed?\u003c\/h3\u003e\n\u003cp\u003eWider spacing can be used on straight runs; curves, slopes and transitions benefit from closer spacing.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65815482302813,"sku":"1587","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/21b8f13a-8868-442c-a5e7-b5e7f0ea8d7cjpg-12298198.jpg?v=1788695281"},{"product_id":"bradas-pe-t-stueck-mit-reduzierung-25-20-bis-32-25-mm","title":"PE reducing tee, 25\/20 to 32\/25 mm – Bradas","description":"\u003cp\u003eThe Bradas tee connects a continuous PE main line to a smaller branch. The branch and reduction are combined in one fitting, eliminating an additional connection point.\u003c\/p\u003e\n\u003ch2\u003eConnections and variants\u003c\/h2\u003e\n\u003cp\u003eThe main-line passage is 25 or 32 mm, depending on the version. The reduced branch is 20 or 25 mm. Available variants are 25×20×25, 32×20×32 and 32×25×32 mm.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp\u003eInsert the PE pipes and tighten the three union nuts by hand. The integrated O-rings seal the connections. The fitting is suitable for garden irrigation, distribution pipes, lawn sprinklers and drip irrigation, as well as above-ground and underground installation.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Reducing tee\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality plastic, T-shaped\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain passage:\u003c\/strong\u003e 25 or 32 mm, depending on the variant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBranch:\u003c\/strong\u003e 20 or 25 mm, reduced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 25×20×25, 32×20×32 and 32×25×32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nuts:\u003c\/strong\u003e 3 pieces, suitable for hand tightening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e 3 integrated O-rings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e UV-resistant, weather-resistant and corrosion-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Above-ground and underground installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich pipe measurements do I need to compare?\u003c\/h3\u003e\n\u003cp\u003eThe specifications refer to the outside diameter of the PE pipe. Available versions are 25 × 20 × 25, 32 × 20 × 32 and 32 × 25 × 32 mm. The two matching measurements belong to the continuous main line.\u003c\/p\u003e\n\u003ch3\u003eWhat does 32×20×32 mm mean?\u003c\/h3\u003e\n\u003cp\u003eThe two outer 32 mm measurements indicate the passage of the main line. The middle 20 mm measurement indicates the reduced branch.\u003c\/p\u003e\n\u003ch3\u003eDoes the tee divide the water volume evenly?\u003c\/h3\u003e\n\u003cp\u003eNo. Distribution depends on pipe diameter, line length, changes in height and connected consumers. The reduced branch does not replace flow or pressure regulation.\u003c\/p\u003e\n\u003ch3\u003eIs additional sealant required?\u003c\/h3\u003e\n\u003cp\u003eNo. The three integrated O-rings are intended to seal the connections.\u003c\/p\u003e\n\u003ch3\u003eCan the tee be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The fitting is specified for above-ground and underground installation.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32x20x32 mm","offer_id":65819254653277,"sku":"3513-2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32x25x32 mm","offer_id":65819254686045,"sku":"3513-3","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25x20x25 mm","offer_id":65817630146909,"sku":"3513-1","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-fr-verlegerohr-12298446.jpg?v=1788698242"},{"product_id":"bradas-pe-rohr-winkel-90-mit-klemmverbindung-und-aussengewinde","title":"90° PE pipe elbow with compression connection and male thread – Bradas","description":"\u003cp\u003eThe Bradas 90° elbow connects a PE distribution pipe to a component with a matching female thread. The pipe side uses a compression connection, while the other side has a male thread. It is available for PE pipes with 20, 25 or 32 mm external diameter.\u003c\/p\u003e\n\u003ch2\u003eRight-angle connection for PE pipes\u003c\/h2\u003e\n\u003cp\u003eThe plastic elbow provides a 90° change of direction in PE distribution pipe and irrigation systems. The male-thread version is suitable for screwing into a matching female thread.\u003c\/p\u003e\n\u003ch2\u003eVersions for different pipe diameters\u003c\/h2\u003e\n\u003cp\u003eThe versions refer to the PE pipe’s external diameter: 20, 25 or 32 mm. Various male threads from 1\/2 to 5\/4 inch are also available. Not every pipe size is combined with every thread size; the selected version is decisive.\u003c\/p\u003e\n\u003ch2\u003eInstalling the compression connection\u003c\/h2\u003e\n\u003cp\u003eCut the PE pipe square, deburr it and push it in to the specified insertion depth according to the installation instructions. The union nut secures the compression connection. Connect the male thread on the other side to the matching female thread and seal it according to the thread pairing. Check the connection for leaks before covering it.\u003c\/p\u003e\n\u003ch2\u003eFor outdoor use\u003c\/h2\u003e\n\u003cp\u003eThe elbow is made of plastic and is UV-resistant. It is suitable for PE distribution pipe systems used in garden irrigation and landscaping.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e 90° elbow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe side:\u003c\/strong\u003e Compression connection for PE pipes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMatching PE pipe external diameters:\u003c\/strong\u003e 20 mm, 25 mm or 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread side:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2 to 5\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperty:\u003c\/strong\u003e UV-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden irrigation, PE distribution pipe systems and landscaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes 25 mm refer to the pipe’s internal or external diameter?\u003c\/h3\u003e\n\u003cp\u003eFor this PE compression fitting, it refers to the external diameter. A PE pipe measuring 25 mm externally requires the 25 mm version. The inch specification alongside it describes the thread at the other end.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 20 mm × ½ inch version mean?\u003c\/h3\u003e\n\u003cp\u003e20 mm is the matching external diameter of the PE pipe. ½ inch denotes the elbow’s male thread. It connects to a matching female thread.\u003c\/p\u003e\n\u003ch3\u003eHow is the pipe side secured?\u003c\/h3\u003e\n\u003cp\u003eInsert the cleanly cut and deburred PE pipe into the compression side to the specified insertion depth. Tighten the union nut to secure the connection. Follow the installation instructions for the order and seating of the sealing and compression parts.\u003c\/p\u003e\n\u003ch3\u003eShould I also use thread seal tape on the pipe compression connection?\u003c\/h3\u003e\n\u003cp\u003eNo. The pipe side seals through the designated sealing elements. Thread sealants are only relevant to the threaded connection, if suitable for the thread pairing and plastic.\u003c\/p\u003e\n\u003ch3\u003eCan I install the elbow underground?\u003c\/h3\u003e\n\u003cp\u003eThe elbow is intended for PE distribution pipe irrigation systems. Check the connection for leaks and ensure it is free from tension before backfilling. Installation depth and frost protection depend on the complete irrigation system.\u003c\/p\u003e\n\u003ch3\u003eCan I use the elbow for drinking water?\u003c\/h3\u003e\n\u003cp\u003eFor drinking water, the specific fitting version and all other components must be suitable. Use in garden irrigation does not prove this suitability. Check the evidence for the specific model before installing it in a drinking-water system.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm - 1\"","offer_id":65819268874589,"sku":"3963-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65819268743517,"sku":"3963-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65819268776285,"sku":"3963-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65819268809053,"sku":"3963-25-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 3\/4\"","offer_id":65819268841821,"sku":"3963-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65819268350301,"sku":"3963-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 5\/4\"","offer_id":65819021082973,"sku":"3963-32-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2\"","offer_id":65817635783005,"sku":"3963-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkelverbinder-12298471.jpg?v=1788698639"},{"product_id":"bradas-90-winkel-fuer-pe-rohre-mit-innengewinde","title":"90° elbow for PE pipes with female thread – Bradas","description":"\u003cp\u003eThis Bradas PE pipe elbow turns a line through 90° while providing a threaded connection. A PE pipe is secured by compression on one side; the female thread on the other accepts a matching male thread. Nine combinations connect pipe diameters from 20 to 50 mm with threads from ½ to 1½ inch.\u003c\/p\u003e\n\u003ch2\u003eChange of direction with threaded transition\u003c\/h2\u003e\n\u003cp\u003eThe elbow allows a fitting to be connected without tightly bending the pipe to change direction. It is suitable for appropriately designed irrigation and distribution systems.\u003c\/p\u003e\n\u003ch2\u003eConnection sides and dimensions\u003c\/h2\u003e\n\u003cp\u003eThe millimetre measurement refers to the PE pipe outside diameter. The inch designation identifies the female thread for the mating component. Select both measurements separately; a larger nominal thread size does not change the stated PE compression size.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eCut the pipe straight, clean the cut edge and prepare it according to the installation instructions. Loosen the union nut, insert the pipe fully into the matching compression socket and tighten the nut according to the manufacturer’s instructions. The compression ring holds the pipe; the O-ring provides the seal.\u003c\/p\u003e\n\u003ch2\u003eSeal and material\u003c\/h2\u003e\n\u003cp\u003eThe housing is made from impact-resistant, corrosion-resistant plastic. No additional thread sealant is required on the PE side. Sealing at the threaded connection depends on its design and mating component; use only sealing compounds suitable for this plastic connection.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAngle:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe diameter:\u003c\/strong\u003e 20–50 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInlet side:\u003c\/strong\u003e Compression connection for PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlet side:\u003c\/strong\u003e BSP female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2\" to 6\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring on the compression side\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Corrosion-resistant, Removable PE compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvailable combinations:\u003c\/strong\u003e 20 mm–1\/2\", 20 mm–3\/4\", 25 mm–1\/2\", 25 mm–3\/4\", 25 mm–1\", 32 mm–3\/4\", 32 mm–1\", 40 mm–5\/4\", 50 mm–6\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden irrigation, Distribution systems, Agriculture, Domestic connections, Greenhouses, Pool systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich dimensions should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eCheck the PE pipe outside diameter and the nominal thread size of the component to be connected. For example, 25 mm \/ ¾ inch means a compression socket for 25 mm pipe and a ¾-inch female thread.\u003c\/p\u003e\n\u003ch3\u003eIs a 1-inch thread exactly 25.4 mm?\u003c\/h3\u003e\n\u003cp\u003eThe inch designation for pipe threads is a nominal size. It cannot be converted into the measured thread diameter by multiplying by 25.4. Use the mating component’s thread specification or a suitable thread table.\u003c\/p\u003e\n\u003ch3\u003eDoes the pipe compression side also need PTFE tape?\u003c\/h3\u003e\n\u003cp\u003eNo. The O-ring seals the pipe side. Seal the threaded connection separately according to its design; sealing material does not belong in the PE compression socket.\u003c\/p\u003e\n\u003ch3\u003eCan I install the elbow underground after assembly?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for underground installation. Check the assembled connection for leaks before backfilling and install the line without stress. Frost protection must suit the system and local conditions.\u003c\/p\u003e\n\u003ch3\u003eWill a flexible garden hose fit in the PE compression socket?\u003c\/h3\u003e\n\u003cp\u003eThe compression socket is intended for PE irrigation pipe with the matching outside diameter. A soft garden hose needs a suitable connector.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm - 1\"","offer_id":65819247935837,"sku":"4332-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65819248755037,"sku":"4332-40-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65819248787805,"sku":"4332-50-6\/4","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65819247804765,"sku":"4332-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65819247837533,"sku":"4332-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65819247870301,"sku":"4332-25-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 3\/4\"","offer_id":65819247903069,"sku":"4332-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2","offer_id":65817650200925,"sku":"4332-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65819247182173,"sku":"4332-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkel-schlauchverbinder-innengewinde-12298646.jpg?v=1788699201"},{"product_id":"bradas-t-stueck-fuer-pe-rohre-mit-innengewinde","title":"T-piece for PE pipes with female thread – Bradas","description":"\u003cp\u003eThe Bradas T-piece adds a lateral female-threaded connection to a PE line. The main line continues through the two straight PE compression sides. Suitable valves, outlet taps or other male-threaded components can be connected to the 90° branch.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eThe straight connections secure the PE pipes with compression rings and union nuts. O-rings seal at the pipes. The lateral BSP female thread forms a separate threaded connection.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFor retrofitting, isolate and depressurise the line. Allow for the installation length and required insertion depths, prepare the pipe ends and secure them according to the installation instructions. Seal the threaded side using a method suitable for its design and this plastic connection.\u003c\/p\u003e\n\u003ch2\u003eMaterial and resistance\u003c\/h2\u003e\n\u003cp\u003eThe plastic housing is corrosion-resistant and intended for underground installation. If fertiliser or other substances are added to the irrigation water, check their compatibility with all components at the concentration used.\u003c\/p\u003e\n\u003ch2\u003eVariants and applications\u003c\/h2\u003e\n\u003cp\u003eTen size combinations cover PE pipe diameters from 20 to 50 mm and nominal thread sizes from ½ to 1½ inch. Select the version according to the existing connections and the irrigation system design.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e T-piece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e T-shaped, 90° branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe diameter:\u003c\/strong\u003e 20–50 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e BSP female thread on the lateral branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2 inch–6\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 10 size combinations\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Pressure-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThrough connection:\u003c\/strong\u003e 2 compression connections for PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBranch:\u003c\/strong\u003e Female thread for male-threaded components\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e O-rings on the PE compression connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Removable compression connections on the PE pipe sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e Corrosion-resistant; check compatibility with water additives for the application\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Irrigation, gardening and landscaping, draw-off points, agriculture, drainage and greenhouses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan a pressure gauge be connected directly?\u003c\/h3\u003e\n\u003cp\u003eIf its connection has a male thread matching the version, it can be fitted to the lateral female thread. The nominal thread size, thread type and sealing design must match.\u003c\/p\u003e\n\u003ch3\u003eHow much pipe must I remove for retrofitting?\u003c\/h3\u003e\n\u003cp\u003eThis depends on the T-piece installation length and the insertion depths of its compression sockets. Before cutting, follow the installation instructions and check the actual dimensions; do not use a standard spacing.\u003c\/p\u003e\n\u003ch3\u003eDo the O-rings also seal the threaded side?\u003c\/h3\u003e\n\u003cp\u003eThe stated O-rings are located at the PE compression connections. The threaded side needs sealing suited to its design. The pipe seals do not indicate sealing for the connected fitting.\u003c\/p\u003e\n\u003ch3\u003eCan I pass any liquid fertiliser through the T-piece?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the product and its concentration. For metered additives, check the approvals for the fitting, pipe and other system components.\u003c\/p\u003e\n\u003ch3\u003eIs the size selected solely according to garden area?\u003c\/h3\u003e\n\u003cp\u003eNo. The pipe diameter and nominal thread size must match the connections. Water quantity, pipe route and pressure losses form part of system planning.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm - 1\"","offer_id":65819249672541,"sku":"4334-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65819250590045,"sku":"4334-40-5\/4","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65819250622813,"sku":"4334-50-6\/4","price":4.49,"currency_code":"EUR","in_stock":false},{"title":"25 mm - 3\/4\"","offer_id":65819249574237,"sku":"4334-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65819249607005,"sku":"4334-25-1","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"32 mm - 3\/4\"","offer_id":65819249639773,"sku":"4334-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 1\"","offer_id":65819249705309,"sku":"4334-40-1","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2\"","offer_id":65817650954589,"sku":"4334-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65819248820573,"sku":"4334-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"25 mm - 1\/2\"","offer_id":65819248853341,"sku":"4334-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-innengewinde-12298669.jpg?v=1788699215"},{"product_id":"auslaufhahn-pe-mit-aussengewinde","title":"PE tap with male thread – Bradas","description":"\u003cp\u003eThe Bradas PE tap is used for drawing water from PE pipework. It has a male thread in 3\/4 inch or 1 inch and is operated by a lever.\u003c\/p\u003e\n\u003ch2\u003eMale thread and sizes\u003c\/h2\u003e\n\u003cp\u003eThe outlet tap is available with a male thread in 3\/4 inch and 1 inch. The thread must match a suitable female thread on the existing connection.\u003c\/p\u003e\n\u003ch2\u003eLever operation\u003c\/h2\u003e\n\u003cp\u003eThe lever is used to open and close the tap.\u003c\/p\u003e\n\u003ch2\u003eFor PE pipework\u003c\/h2\u003e\n\u003cp\u003eThe outlet tap is intended for drawing water from PE pipework. No details of pressure, frost resistance or outlet geometry were carried over.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e 3\/4 inch; 1 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Drawing water from PE pipework\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e Lever handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the outlet tap intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for drawing water from PE pipework.\u003c\/p\u003e\n\u003ch3\u003eWhich connection sizes are available?\u003c\/h3\u003e\n\u003cp\u003eThe outlet tap is available in 3\/4 inch and 1 inch.\u003c\/p\u003e\n\u003ch3\u003eWhich mating part is required?\u003c\/h3\u003e\n\u003cp\u003eThe male thread must match a suitable female thread on the existing connection.\u003c\/p\u003e\n\u003ch3\u003eHow is the tap operated?\u003c\/h3\u003e\n\u003cp\u003eThe lever opens and closes the tap.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"3\/4\"","offer_id":65819102151005,"sku":"4335-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"1\"","offer_id":65817651642717,"sku":"4335-1","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ventil-auengewinde-12298680.jpg?v=1788699230"},{"product_id":"bradas-endtropfer-fuer-tropfbewaesserung-2-4-8-16-l-h","title":"End dripper for drip irrigation, 2\/4\/8\/16 L\/h – Bradas","description":"\u003cp\u003eThe Bradas end drippers deliver water precisely to individual plants or containers. Four versions are available, with nominal flow rates of 2, 4, 8 or 16 L\/h. Each dripper has a labyrinth system and a removable cap for cleaning.\u003c\/p\u003e\n\u003ch2\u003eFlow-rate options and installation\u003c\/h2\u003e\n\u003cp\u003eSelect the nominal flow rate with the product variant; it cannot be adjusted on the dripper. Actual flow depends on the applied pressure. The 1\/4-inch push-in connection is for installation on compatible PE lines with a diameter of 12–32 mm. Use a suitable hole punch for preparation and suitable micro-connectors for onward lines.\u003c\/p\u003e\n\u003ch2\u003eWater flow and cleaning\u003c\/h2\u003e\n\u003cp\u003eThe labyrinth system guides water through a turbulent flow path. The removable cap allows the dripper to be flushed. Clean it with the line depressurised.\u003c\/p\u003e\n\u003ch2\u003eMaterial and working pressure\u003c\/h2\u003e\n\u003cp\u003eThe housing is made from plastic and is UV-, corrosion- and wear-resistant. The pressure range is 0.7–4.5 bar. Install 120 mesh filtration upstream.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal flow rates:\u003c\/strong\u003e 2, 4, 8 or 16 L\/h; actual flow depends on pressure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 1\/4-inch push-in connection for PE line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure range:\u003c\/strong\u003e 0.7–4.5 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible pipes:\u003c\/strong\u003e PE pipes with 12–32 mm diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e Labyrinth technology with turbulent water flow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCap:\u003c\/strong\u003e Removable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e UV-, corrosion- and wear-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFiltration:\u003c\/strong\u003e At least 120 mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the end dripper installed?\u003c\/h3\u003e\n\u003cp\u003eInsert the push-in connection into a suitably prepared opening in a PE line with a diameter of 12–32 mm. The hole must match the connection. Use suitable connectors for outgoing micro-lines; do not equate inlet and outlet dimensions.\u003c\/p\u003e\n\u003ch3\u003eWhich version suits my plant?\u003c\/h3\u003e\n\u003cp\u003eAs well as water requirements, the planned running time determines the choice. Also consider the soil, container size and system pressure. After a trial run, check moisture in the root zone and adjust the running time.\u003c\/p\u003e\n\u003ch3\u003eCan the flow rate be changed on the dripper?\u003c\/h3\u003e\n\u003cp\u003eNo. Select the required version with 2, 4, 8 or 16 L\/h; the dripper is not designed as a four-stage adjustable version.\u003c\/p\u003e\n\u003ch3\u003eHow do I calculate the amount of water delivered?\u003c\/h3\u003e\n\u003cp\u003eMultiply the actual flow in litres per hour by the running time in hours. If the flow is 4 L\/h under the operating conditions, for example, two hours gives approximately 8 litres. The nominal flow rate alone does not guarantee this value at every pressure.\u003c\/p\u003e\n\u003ch3\u003eWhat filtration is required?\u003c\/h3\u003e\n\u003cp\u003eInstall filtration of at least 120 mesh upstream of the dripper.\u003c\/p\u003e\n\u003ch3\u003eHow do I clean a blocked dripper?\u003c\/h3\u003e\n\u003cp\u003eDepressurise the line, remove the cap, flush the dripper under running water and refit the cap.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"2 l\/h","offer_id":65819150877021,"sku":"4641-2","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"4 l\/h","offer_id":65819150909789,"sku":"4641-4","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"8 l\/h","offer_id":65819150942557,"sku":"4641-8","price":0.99,"currency_code":"EUR","in_stock":true},{"title":"16 l\/h","offer_id":65817667076445,"sku":"4641-16","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/55550jpg-12298735.jpg?v=1788699681"},{"product_id":"bradas-2-in-1-stanzwerkzeug-fuer-bewaesserungsrohre-3-oder-8-mm","title":"2-in-1 punch tool for irrigation pipes, 3 or 8 mm – Bradas","description":"\u003cp\u003eThe red Bradas 2-in-1 tool punches an opening and then helps insert a suitable fitting. Versions for 3- or 8-mm openings are available. The hole size, pipe and fitting must be compatible.\u003c\/p\u003e\n\u003ch2\u003ePunching and inserting a fitting\u003c\/h2\u003e\n\u003cp\u003ePlace the punch tip vertically on the pipe, then guide the suitable fitting into the opening using the notch. The hole size, pipe wall and fitting must be compatible for a correct fit.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right variant\u003c\/h2\u003e\n\u003cp\u003eChoose the 3- or 8-mm version according to the requirements of the irrigation system being used. Use the tool only on pipes whose material and wall thickness are suitable for it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Punching and inserting suitable fittings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHole sizes:\u003c\/strong\u003e 3 mm or 8 mm, selectable variant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGuide:\u003c\/strong\u003e Notch for inserting fittings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Irrigation pipes with the matching hole and fitting size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Drip irrigation and other irrigation systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eAre 3 and 8 mm the diameters of the irrigation pipes?\u003c\/h3\u003e\n\u003cp\u003eNo. These specifications describe the openings to be made. The correct hole size depends on the fitting being inserted and the irrigation system’s requirements.\u003c\/p\u003e\n\u003ch3\u003eCan one tool punch both hole sizes?\u003c\/h3\u003e\n\u003cp\u003eThese are separate selectable versions for 3 or 8 mm. You need the appropriate version for each hole size.\u003c\/p\u003e\n\u003ch3\u003eWhat is the notch on the tool for?\u003c\/h3\u003e\n\u003cp\u003eIt helps guide and press a suitable fitting into the prepared opening. The fitting and insertion aid must have compatible designs.\u003c\/p\u003e\n\u003ch3\u003eHow should I prepare the pipe?\u003c\/h3\u003e\n\u003cp\u003eTurn off the water supply, release the pressure and hold the pipe securely. Work only on pipes that the irrigation system specifies for this type of punch installation. Do not damage the opposite pipe wall when punching through.\u003c\/p\u003e\n\u003ch3\u003eDoes the tool seal an opening that is too large?\u003c\/h3\u003e\n\u003cp\u003eNo. The hole punch creates the opening. If it is too large or damaged, repair the area according to the irrigation system’s instructions; pressing the fitting in harder will not correct the fault.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"8 mm","offer_id":65818720469341,"sku":"4958-8","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"3 mm","offer_id":65817679266141,"sku":"4958-3","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/dsa-3302ljpg-12298742.jpg?v=1788700450"},{"product_id":"bradas-tropfbewaesserungsset-50-m-16-mm-mit-bewaesserungsuhr","title":"Drip irrigation kit 50 m, 16 mm, with irrigation timer – Bradas","description":"\u003cp\u003eThe Bradas drip irrigation kit supplies plants directly around the root area. It includes 50 m of black drip hose with a 16 mm diameter, a mechanical irrigation timer and suitable accessories for installation in gardens, along hedges and in greenhouses.\u003c\/p\u003e\n\u003ch2\u003eDrip hose and installation accessories\u003c\/h2\u003e\n\u003cp\u003eThe kit includes 50 m of black drip hose, a mechanical irrigation timer and 87 accessories for assembling the lines. Connectors, T-pieces, elbows and end pieces allow the layout to be divided; fixing spikes secure the route. The included valves can shut off individual line sections.\u003c\/p\u003e\n\u003ch2\u003eTargeted irrigation for many areas\u003c\/h2\u003e\n\u003cp\u003eThe drip hose releases water directly into the planting area along its length. It is suitable for vegetable and flower beds, hedges and greenhouses and can be laid flexibly along the planned route.\u003c\/p\u003e\n\u003ch2\u003eMechanical irrigation timer\u003c\/h2\u003e\n\u003cp\u003eConnect the timer between the tap and irrigation system. Start irrigation by hand and set the running time. Once this has elapsed, the water supply stops. A further irrigation cycle requires another manual start.\u003c\/p\u003e\n\u003ch2\u003eCutting and connecting\u003c\/h2\u003e\n\u003cp\u003eFirst measure the routes and plan the branches. Cut the hose cleanly to length with a suitable cutting tool, join the sections with the appropriate kit connectors and secure them. Extensions must suit the available water volume and pressure; after installation, check water delivery at the plants furthest from the connection.\u003c\/p\u003e\n\u003ch2\u003eConnection and maintenance\u003c\/h2\u003e\n\u003cp\u003eMatch the water supply to the permitted pressure of the kit components and use a suitable pressure reducer if necessary. A suitable filter retains solid particles and helps keep the drip outlets clear. Flush the system before closing the line ends and check for leaking connections after commissioning.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKit:\u003c\/strong\u003e Drip irrigation system with accessories\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrip hose:\u003c\/strong\u003e 50 m, black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 16 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIrrigation timer:\u003c\/strong\u003e Mechanical, manually started, with limited running time\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e 87 pieces for installation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded accessories:\u003c\/strong\u003e Hose connectors, T-pieces, elbows, end pieces, fixing spikes and shut-off valves\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden, hedges and greenhouse\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCutting:\u003c\/strong\u003e Can be cut for the planned installation; use a suitable cutting tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the mechanical irrigation timer work?\u003c\/h3\u003e\n\u003cp\u003eStart irrigation by hand and select the running time. The mechanical timer then stops the water flow. It does not start further irrigation cycles at set times of day.\u003c\/p\u003e\n\u003ch3\u003eWhat area will 50 m of drip hose cover?\u003c\/h3\u003e\n\u003cp\u003eThis depends on the length of the planting rows, spacing and number of parallel lines. Measure the planned hose routes. With several rows, their lengths add together; 50 m of hose therefore cannot be assigned a fixed area in square metres.\u003c\/p\u003e\n\u003ch3\u003eCan the drip hose be cut?\u003c\/h3\u003e\n\u003cp\u003eYes, the hose can be cut for the planned installation. Use a suitable cutting tool and then join the sections with matching kit components.\u003c\/p\u003e\n\u003ch3\u003eDo I need a filter for the system?\u003c\/h3\u003e\n\u003cp\u003eA filter suited to the system helps keep solid dirt particles away from the drip outlets. This is particularly important when using water from tanks or wells. Dissolved lime-forming substances are not removed; maintain the filter and lines according to the water quality.\u003c\/p\u003e\n\u003ch3\u003eHow do I make the kit ready for winter?\u003c\/h3\u003e\n\u003cp\u003eBefore frost, disconnect the irrigation timer and hose from the water connection, drain them completely and store them in a frost-protected place. Also follow the product instructions.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65819223818589,"sku":"3654","price":39.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tropfbewsserungssystem-12298470.jpg?v=1788698283"},{"product_id":"bradas-schlauchanschluss-1-2-zoll-aussengewinde-fuer-16-mm-verlegerohr","title":"Hose connector with 1\/2-inch male thread for 16 mm irrigation pipe – Bradas","description":"\u003cp\u003eThis Bradas connector joins fittings with a 1\/2-inch female thread to 16 mm irrigation pipe. Screw the threaded side into the fitting and secure the pipe to the push-fit socket on the opposite side. The adapter is suitable for smaller valves, indoor fittings, greenhouses and compact irrigation systems.\u003c\/p\u003e\n\u003ch2\u003eThread and pipe connection\u003c\/h2\u003e\n\u003cp\u003eThe 1\/2-inch male thread is the connection side for the fitting. The socket on the opposite side accepts 16 mm irrigation pipe; both connection types are functionally separate and must match their respective counterparts.\u003c\/p\u003e\n\u003ch2\u003eInstallation and sealing\u003c\/h2\u003e\n\u003cp\u003eInstall the plastic thread hand-tight and do not overload it with pliers. Use suitable PTFE tape where the threaded connection is sealed through the thread; observe any existing flat seals and the connection instructions. The corrosion-resistant plastic is intended for frost-free use up to +60 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/2-inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe side:\u003c\/strong\u003e 16 mm push-fit socket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Corrosion-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Screw in and push-fit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sealing:\u003c\/strong\u003e PTFE tape recommended\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e Frost-free up to +60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e 1\/2-inch fittings, smaller valves, greenhouse and balcony systems\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutdoor use:\u003c\/strong\u003e UV-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat counterpart is the connector intended for?\u003c\/h3\u003e\n\u003cp\u003eThe threaded side is designed for fittings or valves with a 1\/2-inch female thread.\u003c\/p\u003e\n\u003ch3\u003eWhich pipe is connected on the other side?\u003c\/h3\u003e\n\u003cp\u003eThe push-fit socket accepts 16 mm irrigation pipe.\u003c\/p\u003e\n\u003ch3\u003eDo I need PTFE tape?\u003c\/h3\u003e\n\u003cp\u003eFor a thread-sealed connection, use suitable PTFE tape according to its instructions. If the counterpart seals via a separate sealing surface or flat seal, use the specified sealing method. Do not spread the plastic thread by applying too much sealing material.\u003c\/p\u003e\n\u003ch3\u003eHow do I distinguish 1\/2 inch from 3\/4 inch?\u003c\/h3\u003e\n\u003cp\u003eAs a guide, male threads are approximately 21 mm for 1\/2 inch and approximately 26.5 mm for 3\/4 inch. Check the existing thread before installation.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain the irrigation system completely before frost. Water trapped in connections can expand when it freezes and damage components.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65819286208861,"sku":"3228","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchverbinder-auengewinde-1jpg-12298415.jpg?v=1788697457"},{"product_id":"bewaesserungstropfer-set-25-teilig-tropfer","title":"Irrigation dripper set with double connection, 25 pieces – Bradas","description":"\u003cp\u003eThe 25-piece Bradas irrigation dripper set contains 25 drippers, 25 adapters and 25 hoses, each 50 cm long. The double connection enables targeted watering of individual plants, pots and planters.\u003c\/p\u003e\n\u003ch2\u003eSet contents and connection\u003c\/h2\u003e\n\u003cp\u003eThe set includes 25 irrigation drippers, 25 adapters and 25 hoses. The hoses are 50 cm long and have a 4 mm connector.\u003c\/p\u003e\n\u003ch2\u003ePressure-dependent water delivery\u003c\/h2\u003e\n\u003cp\u003eWater delivery is 0.9 l\/h at 0.2 bar, 2.2 l\/h at 1 bar and 3.4 l\/h at 2 bar per dripper.\u003c\/p\u003e\n\u003ch2\u003eFor individual plants\u003c\/h2\u003e\n\u003cp\u003eThe drippers direct water to individual plants, pots, hanging baskets or planters. A suitable connection to the supply line is required.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSet contents:\u003c\/strong\u003e 25 drippers, 25 adapters and 25 hoses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose length:\u003c\/strong\u003e 50 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose connector:\u003c\/strong\u003e 4 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV- and chemical-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater delivery per dripper:\u003c\/strong\u003e 0.9 l\/h at 0.2 bar; 2.2 l\/h at 1 bar; 3.4 l\/h at 2 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many drippers does the set contain?\u003c\/h3\u003e\n\u003cp\u003eThe set contains 25 irrigation drippers, plus 25 adapters and 25 hoses.\u003c\/p\u003e\n\u003ch3\u003eHow long are the hoses?\u003c\/h3\u003e\n\u003cp\u003eEach hose is 50 cm long and has a 4 mm connector.\u003c\/p\u003e\n\u003ch3\u003eHow much water does a dripper deliver?\u003c\/h3\u003e\n\u003cp\u003eDelivery depends on pressure: 0.9 l\/h at 0.2 bar, 2.2 l\/h at 1 bar and 3.4 l\/h at 2 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat is the set suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for targeted watering of individual plants, pots, hanging baskets and planters.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65819403092317,"sku":"9166","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/bewsserungssystemjpg-12298215.jpg?v=1788696388"},{"product_id":"bradas-pe-rohrverbinder-gerade-20-25-32-mm","title":"Straight PE pipe connector, 20 \/ 25 \/ 32 mm – Bradas","description":"\u003cp\u003eThe Bradas PE pipe connector joins two straight PE irrigation distribution pipes. Insert the pipe and secure it with the union nut; the integrated O-ring supports sealing without adhesive, welding or specialist tools.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe straight connector joins two PE pipes of the same size in irrigation lines. The UV-resistant plastic is suitable for above-ground and buried lines. Choose the size according to the pipe’s outside diameter: 20, 25 or 32 mm are individual variants, not an adjustable size range.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003ePrepare the pipe ends squarely and cleanly, deburr them and insert them into the connector to the specified insertion depth. Tighten the union nuts by hand. Do not use pipe grips with uncontrolled force, as this could damage the plastic or seal. Check the connection for leaks under operating pressure before covering it with soil.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e PE irrigation distribution pipes with 20, 25 or 32 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection type:\u003c\/strong\u003e Straight pipe-to-pipe connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nut:\u003c\/strong\u003e Plastic, suitable for hand tightening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated O-ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 20, 25 and 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e Corrosion-resistant and UV-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIrrigation operation:\u003c\/strong\u003e For typical garden irrigation pressures of 2–4 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameter of the PE pipe. The available sizes are 20 mm, 25 mm and 32 mm.\u003c\/p\u003e\n\u003ch3\u003eDo I need tools?\u003c\/h3\u003e\n\u003cp\u003eThe union nuts are tightened by hand; adhesive or welding is not required. Suitable tools are needed to cut and deburr the PE pipes cleanly.\u003c\/p\u003e\n\u003ch3\u003eCan the connector be used underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The plastic is corrosion-resistant and intended for buried PE irrigation lines.\u003c\/p\u003e\n\u003ch3\u003eDoes the connector fit PVC pipes?\u003c\/h3\u003e\n\u003cp\u003eNo. The connector is designed for PE pipes made from polyethylene.\u003c\/p\u003e\n\u003ch3\u003eWhat water pressure is the connector suitable for?\u003c\/h3\u003e\n\u003cp\u003eFor typical garden irrigation at 2–4 bar. This range is not a statement of the maximum permissible or burst pressure. For higher pressures, the pressure rating of the specific version must be suitable.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"25 mm","offer_id":65834752344413,"sku":"3512-25","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm","offer_id":65834752377181,"sku":"3512-32","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm","offer_id":65833853649245,"sku":"3512-20","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchverbinder-fr-verlegerohr-12298442.jpg?v=1788728351"},{"product_id":"bradas-pe-kugelhahn-mit-aussengewinde-2032-mm","title":"PE ball valve with male thread, 20–32 mm – Bradas","description":"\u003cp\u003eThe Bradas PE ball valve connects a PE irrigation distribution pipe to an existing female thread and allows the water flow to be shut off. The lever opens or closes the full passage with a 90° turn.\u003c\/p\u003e\n\u003ch2\u003eConnections\u003c\/h2\u003e\n\u003cp\u003eInsert the PE pipe into the compression connection and secure it with the union nut. The male thread is intended for existing female threads on pumps, valve boxes or water connections.\u003c\/p\u003e\n\u003ch2\u003eOperation and installation\u003c\/h2\u003e\n\u003cp\u003eA quarter turn of the lever opens or closes the water flow. The sealing method on the threaded side must suit the mating connection. When installed underground, a valve box keeps the lever accessible for operation and inspection.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Ball valve with male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipes:\u003c\/strong\u003e 20–32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread variants:\u003c\/strong\u003e 1\/2, 3\/4 or 1 inch male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e Quarter turn or 90° turn\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic, corrosion-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBall:\u003c\/strong\u003e Plastic with full passage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE connection:\u003c\/strong\u003e Compression fitting with union nut\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e Male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePassage:\u003c\/strong\u003e Full passage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich combination fits my system?\u003c\/h3\u003e\n\u003cp\u003eThe intended combinations are 20 mm × 1\/2 inch, 25 mm × 3\/4 inch or 32 mm × 1 inch.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a male and female thread?\u003c\/h3\u003e\n\u003cp\u003eThe male thread is on the outside and screws into an existing female thread. A female thread receives a male thread.\u003c\/p\u003e\n\u003ch3\u003eDo I need sealant on the thread?\u003c\/h3\u003e\n\u003cp\u003eThe PE side is sealed by its own seal. For the threaded side, sealing depends on the mating connection. Use only a sealing method suitable and intended for the plastic connection; do not apply hemp or thread tape automatically in addition.\u003c\/p\u003e\n\u003ch3\u003eCan the ball valve be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The plastic is corrosion-resistant. A valve box makes it easier to access the lever later.\u003c\/p\u003e\n\u003ch3\u003eWhich connection measurements are important when choosing?\u003c\/h3\u003e\n\u003cp\u003eOn the PE side, the pipe outside diameter matters. On the threaded side, the thread size and connection type must match the mating part. Nominal inch sizes do not directly correspond to a thread diameter measured in millimetres.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"25mm x 3\/4\"","offer_id":65834752639325,"sku":"3514-25","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"32mm x 1\"","offer_id":65834752672093,"sku":"3514-32","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"20mm x 1\/2\"","offer_id":65833853911389,"sku":"3514-20","price":2.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/kugelhahn-auengewinde-12298450.jpg?v=1788728358"},{"product_id":"bradas-pe-kugelhahn-mit-zwei-klemmanschluessen-2040-mm","title":"PE ball valve with two compression connections, 20–40 mm – Bradas","description":"\u003cp\u003eThe Bradas PE ball valve is fitted directly between two PE irrigation distribution pipes. Both sides have a compression connection with a union nut; the lever opens or closes the water flow with a quarter turn.\u003c\/p\u003e\n\u003ch2\u003eDirect installation in the line\u003c\/h2\u003e\n\u003cp\u003eThe ball valve is designed for a continuous PE line without a thread or additional adapter. It is suitable for shutting off individual irrigation zones, maintenance work and seasonal shutdown.\u003c\/p\u003e\n\u003ch2\u003eInstallation and operation\u003c\/h2\u003e\n\u003cp\u003eInsert the pipes into the two compression connections and tighten the union nuts by hand. The full passage reduces pressure loss when the valve is open. A valve box is recommended for operation when installed underground.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Ball valve with PE connections on both sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipes:\u003c\/strong\u003e 20–40 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 20, 25, 32 and 40 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic, corrosion-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBall valve:\u003c\/strong\u003e Plastic with full passage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating lever:\u003c\/strong\u003e Ergonomic, 90° turn\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 PE compression fittings with union nuts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e Integrated O-rings on both sides\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Zone separation, irrigation distribution systems, winterisation, garden irrigation and agriculture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is this ball valve used for?\u003c\/h3\u003e\n\u003cp\u003eIt shuts off individual lines or irrigation zones, for example for maintenance, winterisation or separate control.\u003c\/p\u003e\n\u003ch3\u003eWhich pipe diameters fit?\u003c\/h3\u003e\n\u003cp\u003eThe ball valve is available for PE pipes with 20, 25, 32 or 40 mm outside diameter.\u003c\/p\u003e\n\u003ch3\u003eDo I need tools for installation?\u003c\/h3\u003e\n\u003cp\u003eNo. Insert the pipes and tighten the union nuts by hand.\u003c\/p\u003e\n\u003ch3\u003eCan the ball valve be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The plastic is corrosion-free. A valve box makes it easier to access the operating lever.\u003c\/p\u003e\n\u003ch3\u003eDoes the water pressure remain the same downstream of the ball valve?\u003c\/h3\u003e\n\u003cp\u003eEven an open ball valve creates flow resistance. The full passage limits the additional restriction; actual pressure loss depends on the flow rate and the complete installation.\u003c\/p\u003e\n\u003ch3\u003eDoes shutting off the valve automatically winterise the line?\u003c\/h3\u003e\n\u003cp\u003eNo. Water can remain in a shut-off line. Before frost, drain the system using its intended procedure, including the ball valve and lower sections.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"25 mm","offer_id":65834697851229,"sku":"3515-25","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"32 mm","offer_id":65834697883997,"sku":"3515-32","price":3.99,"currency_code":"EUR","in_stock":true},{"title":"40 mm","offer_id":65834648928605,"sku":"3515-40","price":4.99,"currency_code":"EUR","in_stock":true},{"title":"20 mm","offer_id":65833854206301,"sku":"3515-20","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/kugelhahn-mit-schlauchverbinderjpg-12298454.jpg?v=1788728364"},{"product_id":"bradas-pe-kugelhahn-mit-innengewinde-2032-mm","title":"PE ball valve with female thread, 20–32 mm – Bradas","description":"\u003cp\u003eThe Bradas PE ball valve connects a PE irrigation distribution pipe to a component with a male thread, such as a tap, adapter, distributor or pump connection. The 90° lever provides quick opening and closing.\u003c\/p\u003e\n\u003ch2\u003ePE compression connection\u003c\/h2\u003e\n\u003cp\u003eInsert the PE pipe into the compression connection and secure it with the union nut and O-ring. Depending on the version, it fits PE pipes with 20, 25 or 32 mm outside diameter.\u003c\/p\u003e\n\u003ch2\u003eFemale thread and ball valve\u003c\/h2\u003e\n\u003cp\u003eThe female thread receives a male thread and is available in 1\/2, 3\/4 or 1 inch. When open, the ball valve provides a full passage and is intended for open\/closed operation.\u003c\/p\u003e\n\u003ch2\u003eSelection and frost protection\u003c\/h2\u003e\n\u003cp\u003eIf the connection point has a visible male thread, a female-thread connection is required. Drain standing water before frost.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Ball valve with female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale thread:\u003c\/strong\u003e 1\/2, 3\/4 or 1 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe sizes:\u003c\/strong\u003e 20, 25 or 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e 90° lever, quarter turn\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE side:\u003c\/strong\u003e Compression fitting with union nut and O-ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic, corrosion-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBall valve:\u003c\/strong\u003e Plastic, full passage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Garden irrigation, tap connection, distributor systems, irrigation distribution systems and agriculture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich PE pipes fit the push-in side?\u003c\/h3\u003e\n\u003cp\u003eDepending on the version, it fits PE irrigation distribution pipes with 20, 25 or 32 mm outside diameter.\u003c\/p\u003e\n\u003ch3\u003eWhat does the female thread connect to?\u003c\/h3\u003e\n\u003cp\u003eThe female thread is intended for male threads on taps, adapters, distributors or pump connections.\u003c\/p\u003e\n\u003ch3\u003eHow is the ball valve operated?\u003c\/h3\u003e\n\u003cp\u003eOpen or close the water flow with the 90° lever and a quarter turn. The ball valve is primarily intended for open\/closed operation.\u003c\/p\u003e\n\u003ch3\u003eDo I need sealant on the thread?\u003c\/h3\u003e\n\u003cp\u003eThe PE side is sealed by its own seal. For the threaded side, sealing depends on the mating connection. Use only a sealing method suitable and intended for the plastic connection; do not apply hemp or thread tape automatically in addition.\u003c\/p\u003e\n\u003ch3\u003eWhat should I do before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain standing water before frost to prevent frost damage.\u003c\/p\u003e\n\u003ch3\u003eWhich connection measurements are important when choosing?\u003c\/h3\u003e\n\u003cp\u003eOn the PE side, the pipe outside diameter matters. On the threaded side, the thread size and connection type must match the mating part. Nominal inch sizes do not directly correspond to a thread diameter measured in millimetres.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32mm x 1\"","offer_id":65834698211677,"sku":"3516-32","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"20mm x 1\/2\"","offer_id":65833856368989,"sku":"3516-20","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25mm x 3\/4\"","offer_id":65834698047837,"sku":"3516-25","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/kugelhahn-mit-innengewinde-12298458.jpg?v=1788728370"},{"product_id":"bradas-pe-t-stueck-ohne-reduzierung-2032-mm","title":"PE equal tee, 20–32 mm – Bradas","description":"\u003cp\u003eThe Bradas tee divides a PE pipe line in two directions without changing the diameter at the branch. All three connections are the same size and intended for identically dimensioned lines.\u003c\/p\u003e\n\u003ch2\u003eEqual pipe diameters\u003c\/h2\u003e\n\u003cp\u003eThe left passage, right passage and upper branch have the same diameter. The tee is available for 20, 25 or 32 mm variants; different connection sizes are not intended for this model.\u003c\/p\u003e\n\u003ch2\u003eInstallation and sealing\u003c\/h2\u003e\n\u003cp\u003eInsert the PE pipes and tighten the union nuts by hand. Three integrated O-rings seal the connections. Adhesive, soldering or specialist tools are not required.\u003c\/p\u003e\n\u003ch2\u003eMaterial and use\u003c\/h2\u003e\n\u003cp\u003eThe plastic body is UV-resistant and corrosion-free. The tee is intended for irrigation lines above or below ground. This does not imply general chemical resistance; check compatibility with the fitting and its seals when using additives.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Equal-diameter tee\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 3 identical PE compression connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe sizes:\u003c\/strong\u003e 20, 25 or 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free with compression fittings and union nuts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e 3 integrated O-rings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain body:\u003c\/strong\u003e Plastic, symmetrical T-shape\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e UV-resistant, corrosion-free plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Garden irrigation, lawn sprinkler systems, irrigation distribution systems, drip irrigation and agriculture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does this tee differ from a reducing version?\u003c\/h3\u003e\n\u003cp\u003eAll three connections on this model have the same diameter. A reducing version has a smaller branch.\u003c\/p\u003e\n\u003ch3\u003eCan I mix different diameters?\u003c\/h3\u003e\n\u003cp\u003eNo. This tee has three identical connections. Different diameters require a reducing tee.\u003c\/p\u003e\n\u003ch3\u003eDo I need tools for installation?\u003c\/h3\u003e\n\u003cp\u003eNo. Insert the PE pipes and tighten the union nuts by hand.\u003c\/p\u003e\n\u003ch3\u003eCan the connector be installed underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The fitting is intended for burying in an irrigation line. Check the connections for leaks before backfilling and install without mechanical strain.\u003c\/p\u003e\n\u003ch3\u003eDo both branches receive the same amount of water?\u003c\/h3\u003e\n\u003cp\u003eEqual connection diameters do not guarantee identical water volumes. Line length, elevation and connected sprinklers or drippers affect distribution. Design the system accordingly and regulate separately if necessary.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"20 mm","offer_id":65833856762205,"sku":"3517-20","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":65834698637661,"sku":"3517-25","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm","offer_id":65834698670429,"sku":"3517-32","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-12298462.jpg?v=1788728378"},{"product_id":"bradas-pe-endkappe-fuer-verlegerohre-2032-mm","title":"PE end cap for irrigation distribution pipes, 20–32 mm – Bradas","description":"\u003cp\u003eThe Bradas end fitting closes open ends of PE irrigation distribution pipes. It is pushed on and secured with the union nut, closing the line without adhesive, soldering or tools.\u003c\/p\u003e\n\u003ch2\u003eSealing and removal\u003c\/h2\u003e\n\u003cp\u003eThe integrated O-ring seals the pipe end. Shut off the water supply and depressurise the line before loosening. The union nut can then be loosened and the end cap removed when extending the line.\u003c\/p\u003e\n\u003ch2\u003eWinterisation\u003c\/h2\u003e\n\u003cp\u003eAn accessible line end can serve as a flushing or drainage opening. Depressurise the line first. Whether all water drains depends on the gradient and other components; opening an end cap alone does not make every system frost-proof.\u003c\/p\u003e\n\u003ch2\u003eMaterial and sizes\u003c\/h2\u003e\n\u003cp\u003eThe end fitting is made from plastic and intended for PE pipes with 20, 25 or 32 mm outside diameter. It is corrosion-free and UV-resistant.\u003c\/p\u003e\n\u003ch2\u003ePreparing the pipe end and checking the connection\u003c\/h2\u003e\n\u003cp\u003eChoose the PE pipe outside diameter to match the version. Cut the pipe squarely, deburr it and clean the sealing area. Insert the pipe and seal according to the installation instructions; the union nut secures the connection. Carry out a leak test before burying it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e End fitting \/ end cap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe sizes:\u003c\/strong\u003e 20, 25 and 32 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free using a PE compression fitting and union nut\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Plastic, closed end\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e Integrated O-ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e Water- and pressure-resistant, corrosion-free, UV-resistant and removable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Garden irrigation, irrigation distribution systems, drip irrigation, lawn sprinklers and winterisation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the end fitting used for?\u003c\/h3\u003e\n\u003cp\u003eIt closes the open end of a PE pipe so that water does not escape and the line remains sealed.\u003c\/p\u003e\n\u003ch3\u003eCan the closure be removed later?\u003c\/h3\u003e\n\u003cp\u003eYes. First shut off the water supply and release the remaining pressure. Then loosen the union nut and remove the end cap. For reinstallation, clean the pipe end and seal and check them for damage.\u003c\/p\u003e\n\u003ch3\u003eHow do I identify the correct size?\u003c\/h3\u003e\n\u003cp\u003eThe end cap must match the outside diameter of the PE pipe. Choose the version for 20, 25 or 32 mm; one cap does not cover all three diameters.\u003c\/p\u003e\n\u003ch3\u003eCan I use the end fitting underground?\u003c\/h3\u003e\n\u003cp\u003eYes. The material is corrosion-resistant and suitable for permanent installation in the ground.\u003c\/p\u003e\n\u003ch3\u003eHow can the end fitting help with winterisation?\u003c\/h3\u003e\n\u003cp\u003eAfter releasing the pressure, an accessible end cap can be opened to drain the line. Low points, closed valves and other fittings may retain residual water. Drain the complete system using its intended winter procedure.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"25 mm","offer_id":65834699161949,"sku":"3518-25","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm","offer_id":65834699194717,"sku":"3518-32","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm","offer_id":65833857089885,"sku":"3518-20","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/endstck-schlauchverbinder-12298466.jpg?v=1788728383"},{"product_id":"bradas-pe-rohr-reduzierkupplung-2050-mm","title":"PE pipe reducing coupler, 20–50 mm – Bradas","description":"\u003cp\u003eConnect two different PE pipe sizes with this Bradas reducing coupler. Both pipe ends are secured by compression and sealed with O-rings. The removable connection is suitable for transitions within irrigation lines.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eThe union nut and compression ring are separate components. The compression ring secures the inserted PE pipe, while the O-ring on the pipe side helps provide the seal.\u003c\/p\u003e\n\u003ch2\u003eSize range\u003c\/h2\u003e\n\u003cp\u003eEight size combinations range from 25\/20 mm to 50\/40 mm. Connection sizes refer to the PE pipe outside diameter; depending on the version, 20, 25, 32, 40 and 50 mm are used.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eCut the pipe end cleanly to length and deburr it. Push the pipe in to the specified insertion depth and tighten the union nut according to the manufacturer’s instructions.\u003c\/p\u003e\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp\u003eThe plastic housing is UV-resistant and corrosion-resistant and is intended for underground installation. Check the completed connection for leaks before backfilling. Protect water-carrying outdoor lines from frost, for example by completely draining seasonal systems.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting type:\u003c\/strong\u003e Reducing coupler\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable pipes:\u003c\/strong\u003e PE irrigation pipes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 20, 25, 32, 40 or 50 mm outside diameter, depending on the version\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize combinations:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize range:\u003c\/strong\u003e 25–20 mm to 50–40 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe side:\u003c\/strong\u003e Compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nut:\u003c\/strong\u003e Secures the compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompression ring:\u003c\/strong\u003e Secures the PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Irrigation systems and gardening and landscaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich two measurements do I need to determine for the reduction?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameters of both PE pipes. For example, a 25\/20 mm version connects a 25 mm pipe to a 20 mm pipe. Both connection sizes must match.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a soft garden hose to a PE pipe with it?\u003c\/h3\u003e\n\u003cp\u003eThe coupler is designed for PE service pipes. A flexible garden hose needs a suitable transition fitting; its inside diameter is not the selection measurement for this PE coupler.\u003c\/p\u003e\n\u003ch3\u003eShould I prepare the pipe ends before installation?\u003c\/h3\u003e\n\u003cp\u003eCut the ends square and clean and deburr the edges according to the installation instructions. Insert the pipe to the required depth so that the compression and seal engage correctly.\u003c\/p\u003e\n\u003ch3\u003eCan the coupler be reused?\u003c\/h3\u003e\n\u003cp\u003eAfter isolating and depressurising the line, the connection can be released. Before reinstalling it, check the seals, compression components and pipe ends for damage.\u003c\/p\u003e\n\u003ch3\u003eDoes UV-resistant plastic also prevent damage from freezing water?\u003c\/h3\u003e\n\u003cp\u003eNo. UV resistance concerns exposure to sunlight. Remaining freezing water can damage the pipe and coupler; provide suitable frost protection.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"40 - 25 mm","offer_id":65834688938333,"sku":"4328-40-25","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 - 32 mm","offer_id":65834688971101,"sku":"4328-40-32","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"50 - 25 mm ","offer_id":65834689003869,"sku":"4328-50-25","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"50 - 32 mm","offer_id":65834689036637,"sku":"4328-50-32","price":2.99,"currency_code":"EUR","in_stock":false},{"title":"50 - 40 mm","offer_id":65834689069405,"sku":"4328-50-40","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"25 - 20 mm","offer_id":65833876816221,"sku":"4328-25-20","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 - 20 mm","offer_id":65834688708957,"sku":"4328-32-20","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 - 25 mm","offer_id":65834688741725,"sku":"4328-32-25","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/reduzierstck-12298479.jpg?v=1788728833"},{"product_id":"bradas-pe-rohr-verbinder-mit-aussengewinde","title":"PE pipe connector with male thread – Bradas","description":"\u003cp\u003eThe Bradas PE pipe connector provides a transition from a pipe run to a threaded connection. Its male-threaded side fits a matching female-threaded component. The PE side secures the pipe with a compression ring and union nut; an O-ring seals the pipe side.\u003c\/p\u003e\n\u003ch2\u003eThread and mating component\u003c\/h2\u003e\n\u003cp\u003eThe male thread must match the nominal size and thread type of the mating female thread. Suitable components include compatible fittings, filters or distributors. The inch designation is a nominal thread size, not a directly convertible pipe outside diameter.\u003c\/p\u003e\n\u003ch2\u003ePipe connection\u003c\/h2\u003e\n\u003cp\u003eThe pipe side is designed for PE service pipes with 20, 25, 32, 40 or 50 mm outside diameter. The compression ring and union nut are separate components; the O-ring helps seal the pipe side.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp\u003eCut the pipe cleanly to length, prepare the edge according to the installation instructions and insert it to the required depth. Tighten the union nut according to the manufacturer’s instructions. The UV-resistant, corrosion-resistant plastic fitting is intended for underground installation. Check the connection before backfilling and protect the system from remaining freezing water.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable pipes:\u003c\/strong\u003e PE irrigation pipes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 20, 25, 32, 40 or 50 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread side:\u003c\/strong\u003e Male thread, 1\/2\" to 6\/4\" nominal size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMating component:\u003c\/strong\u003e Matching female thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 13 variants\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe connection:\u003c\/strong\u003e Compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nut:\u003c\/strong\u003e Secures the compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompression ring:\u003c\/strong\u003e Secures the PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring on the pipe side\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Irrigation systems, gardening and landscaping, and PE pipe systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the connector fit a female-threaded connection?\u003c\/h3\u003e\n\u003cp\u003eYes, provided the nominal thread size and thread type match. This connector’s male thread forms the mating connection. The PE compression size must also match the pipe outside diameter.\u003c\/p\u003e\n\u003ch3\u003eIs the pipe size the inside or outside measurement?\u003c\/h3\u003e\n\u003cp\u003eFor this PE compression connector, the pipe outside diameter applies. The available selection includes 20, 25, 32, 40 and 50 mm; determine the thread’s inch size separately.\u003c\/p\u003e\n\u003ch3\u003eDoes the O-ring also seal the connected thread?\u003c\/h3\u003e\n\u003cp\u003eThe stated O-ring seals the PE pipe side. Thread sealing depends on the connection design. Use only seals or sealing compounds suitable for the plastic connection.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check if the compression connection leaks?\u003c\/h3\u003e\n\u003cp\u003eFirst isolate and depressurise the line. Then check the pipe size, insertion depth, clean cut edge and seal condition. Replace damaged parts rather than compensating with uncontrolled overtightening.\u003c\/p\u003e\n\u003ch3\u003eCan I use the connector in a drinking-water line?\u003c\/h3\u003e\n\u003cp\u003eSuitability for drinking water has not been demonstrated for this product range. The relevant suitability and requirements for all components must be expressly confirmed.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"40 mm - 6\/4\"","offer_id":65834690609501,"sku":"4329-40-6\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 5\/4\"","offer_id":65834690642269,"sku":"4329-50-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65834690675037,"sku":"4329-50-6\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 2\"","offer_id":65834690707805,"sku":"4329-50-2","price":1.99,"currency_code":"EUR","in_stock":false},{"title":"32 mm - 3\/4\"","offer_id":65834689691997,"sku":"4329-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 1\"","offer_id":65834689724765,"sku":"4329-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 5\/4\"","offer_id":65834689757533,"sku":"4329-32-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 1\"","offer_id":65834689790301,"sku":"4329-40-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65834689823069,"sku":"4329-40-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2\"","offer_id":65833876947293,"sku":"4329-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65834689331549,"sku":"4329-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65834689364317,"sku":"4329-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65834689397085,"sku":"4329-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65834689429853,"sku":"4329-25-1","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/endstck-mit-auengewinde-12298610.jpg?v=1788728845"},{"product_id":"bradas-pe-rohr-verbinder-mit-innengewinde","title":"PE pipe connector with female thread – Bradas","description":"\u003cp\u003eThe Bradas PE pipe connector provides a transition from a pipe run to a threaded connection. Its female-threaded side fits a matching male-threaded component. The PE side secures the pipe with a compression ring and union nut; an O-ring seals the pipe side.\u003c\/p\u003e\n\u003ch2\u003eThread and mating component\u003c\/h2\u003e\n\u003cp\u003eThe female thread must match the nominal size and thread type of the mating male thread. Suitable components include compatible fittings, filters or distributors. The inch designation is a nominal thread size, not a directly convertible pipe outside diameter.\u003c\/p\u003e\n\u003ch2\u003ePipe connection\u003c\/h2\u003e\n\u003cp\u003eThe pipe side is designed for PE service pipes with 20, 25, 32, 40 or 50 mm outside diameter. The compression ring and union nut are separate components; the O-ring helps seal the pipe side.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp\u003eCut the pipe cleanly to length, prepare the edge according to the installation instructions and insert it to the required depth. Tighten the union nut according to the manufacturer’s instructions. The UV-resistant, corrosion-resistant plastic fitting is intended for underground installation. Check the connection before backfilling and protect the system from remaining freezing water.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable pipes:\u003c\/strong\u003e PE irrigation pipes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 20, 25, 32, 40 or 50 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread side:\u003c\/strong\u003e Female thread, 1\/2\" to 2\" nominal size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMating component:\u003c\/strong\u003e Matching male thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 14 variants\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe connection:\u003c\/strong\u003e Compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnion nut:\u003c\/strong\u003e Secures the compression connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompression ring:\u003c\/strong\u003e Secures the PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeal:\u003c\/strong\u003e O-ring on the pipe side\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Irrigation systems, pump connections, and gardening and landscaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the connector fit a male-threaded connection?\u003c\/h3\u003e\n\u003cp\u003eYes, provided the nominal thread size and thread type match. This connector’s female thread forms the mating connection. The PE compression size must also match the pipe outside diameter.\u003c\/p\u003e\n\u003ch3\u003eIs the pipe size the inside or outside measurement?\u003c\/h3\u003e\n\u003cp\u003eFor this PE compression connector, the pipe outside diameter applies. The available selection includes 20, 25, 32, 40 and 50 mm; determine the thread’s inch size separately.\u003c\/p\u003e\n\u003ch3\u003eDoes the O-ring also seal the connected thread?\u003c\/h3\u003e\n\u003cp\u003eThe stated O-ring seals the PE pipe side. Thread sealing depends on the connection design. Use only seals or sealing compounds suitable for the plastic connection.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check if the compression connection leaks?\u003c\/h3\u003e\n\u003cp\u003eFirst isolate and depressurise the line. Then check the pipe size, insertion depth, clean cut edge and seal condition. Replace damaged parts rather than compensating with uncontrolled overtightening.\u003c\/p\u003e\n\u003ch3\u003eCan a heavy pump component hang freely from the plastic connector?\u003c\/h3\u003e\n\u003cp\u003eSecure fittings and connected pipes so that they do not transfer avoidable bending or tensile forces to the plastic connection. Connect the thread without stress and according to the installation instructions.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"50 mm - 5\/4\"","offer_id":65834693427549,"sku":"4330-50-5\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65834693460317,"sku":"4330-50-6\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 2\"","offer_id":65834693493085,"sku":"4330-50-2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 1\"","offer_id":65834692673885,"sku":"4330-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 5\/4\"","offer_id":65834692706653,"sku":"4330-32-5\/4","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"40 mm - 1\"","offer_id":65834692739421,"sku":"4330-40-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65834692772189,"sku":"4330-40-5\/4","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"40 mm - 6\/4\"","offer_id":65834692804957,"sku":"4330-40-6\/4","price":2.49,"currency_code":"EUR","in_stock":false},{"title":"20 mm - 3\/4\"","offer_id":65834691658077,"sku":"4330-20-34","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65834691690845,"sku":"4330-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65834691723613,"sku":"4330-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65834691756381,"sku":"4330-25-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 3\/4\"","offer_id":65834691789149,"sku":"4330-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 1\/2\"","offer_id":65833877242205,"sku":"4330-20-12","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/endstck-mit-innengewinde-12298625.jpg?v=1788728866"},{"product_id":"schlauchkupplung-20-50-mm-winkel-fuer-pe-rohre","title":"90° elbow for PE pipes with hose coupling – Bradas","description":"\u003cp\u003eThe Bradas elbow routes PE pipework through 90° and provides a hose coupling. It is intended for pipe diameters from 20 to 50 mm and for garden and irrigation applications.\u003c\/p\u003e\n\u003ch2\u003e90° elbow for PE pipes\u003c\/h2\u003e\n\u003cp\u003eThe fitting changes the direction of the pipe by 90°. The specified pipe range is 20 to 50 mm.\u003c\/p\u003e\n\u003ch2\u003eHose coupling\u003c\/h2\u003e\n\u003cp\u003eThe hose coupling allows a transition from PE pipe to a garden hose. The suitable version must match the existing pipe and hose system.\u003c\/p\u003e\n\u003ch2\u003ePlastic for garden and irrigation use\u003c\/h2\u003e\n\u003cp\u003eThe elbow is made of plastic and is intended for garden and irrigation systems. Details about the specific pressure load or installation method have not been carried over.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFitting type:\u003c\/strong\u003e 90° elbow with hose coupling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe range:\u003c\/strong\u003e 20–50 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Garden and irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich pipe diameters fit?\u003c\/h3\u003e\n\u003cp\u003eThe elbow is specified for PE pipes from 20 to 50 mm. Check the actual pipe diameter before selecting it.\u003c\/p\u003e\n\u003ch3\u003eWhat angle does the fitting have?\u003c\/h3\u003e\n\u003cp\u003eThe pipe route is turned through 90°.\u003c\/p\u003e\n\u003ch3\u003eWhat is the hose coupling for?\u003c\/h3\u003e\n\u003cp\u003eIt allows a transition from PE pipe to a garden hose.\u003c\/p\u003e\n\u003ch3\u003eWhat material is the elbow made of?\u003c\/h3\u003e\n\u003cp\u003eThe elbow is made of plastic.\u003c\/p\u003e\n\u003ch3\u003eWhat applications is the elbow intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for garden and irrigation systems.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"32 mm","offer_id":65834693984605,"sku":"4331-32","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm","offer_id":65834694017373,"sku":"4331-40","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm","offer_id":65834694050141,"sku":"4331-50","price":3.99,"currency_code":"EUR","in_stock":true},{"title":"20 mm","offer_id":65833882288477,"sku":"4331-20","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":65834693787997,"sku":"4331-25","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkel-schlauchverbinder-12298640.jpg?v=1788728885"},{"product_id":"bradas-t-stueck-fuer-pe-rohre-mit-aussengewinde","title":"T-piece for PE pipes with male thread – Bradas","description":"\u003cp\u003eUse this Bradas T-piece to create a threaded branch from a PE pipe run. The two straight compression sides accept pipes with the same outside diameter. The lateral 90° branch has a male thread for a matching female-threaded component.\u003c\/p\u003e\n\u003ch2\u003eConstruction and connections\u003c\/h2\u003e\n\u003cp\u003eThe T-piece has three connections: two straight PE pipe compression connections and a lateral BSP male-threaded branch. The two PE sides connect PE pipes of the same diameter. The threaded branch is independent of them and connects to a female-threaded component.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eIsolate and depressurise the pipe run before work. Insert the prepared pipe ends fully into the compression sockets and tighten the union nuts according to the installation instructions. For the threaded branch, follow the sealing design of the mating component. A fixed number of thread-tape turns is not suitable for every connection.\u003c\/p\u003e\n\u003ch2\u003eVariants and applications\u003c\/h2\u003e\n\u003cp\u003eTwelve size combinations are available for PE pipes from 20 to 50 mm and threads from ½ to 1½ inch. Examples include 20 mm \/ ½ inch, 32 mm \/ 1 inch and 50 mm \/ 1½ inch. The plastic fitting is suitable for appropriately designed irrigation systems and underground installation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e T-piece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e T-shaped, 90° branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePE pipe diameter:\u003c\/strong\u003e 20–50 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThreaded branch:\u003c\/strong\u003e Male thread (BSP)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread sizes:\u003c\/strong\u003e 1\/2 inch–6\/4 inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e 12 size combinations\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant, temperature-resistant and weather-resistant plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThrough connection:\u003c\/strong\u003e Two compression connections for PE pipe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeals:\u003c\/strong\u003e O-rings on the PE compression connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Corrosion-resistant, UV-stable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Irrigation, agriculture, pipe distribution, horticulture, greenhouses and sports-ground maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I branch a thinner PE line directly from it?\u003c\/h3\u003e\n\u003cp\u003eThe lateral connection is a male thread. A suitable transition fitting is required for an additional PE line. The two straight PE compression sides each have the same pipe diameter.\u003c\/p\u003e\n\u003ch3\u003eHow does this T-piece differ from an elbow coupling?\u003c\/h3\u003e\n\u003cp\u003eThe T-piece has three connections and creates a branch while the main line continues. An elbow has two connections and only changes the line direction.\u003c\/p\u003e\n\u003ch3\u003eHow is a fitting installed on the lateral branch?\u003c\/h3\u003e\n\u003cp\u003eIt needs a matching female thread. Check the thread type, nominal size and sealing design before installation. Support heavy fittings so they do not load the plastic fitting in bending.\u003c\/p\u003e\n\u003ch3\u003eCan the T-piece be removed later?\u003c\/h3\u003e\n\u003cp\u003eThe compression connections can be released. Isolate and depressurise the line before loosening them. Check the pipe ends and seals before reinstalling.\u003c\/p\u003e\n\u003ch3\u003eCan pressure resistance be determined from the pipe diameter alone?\u003c\/h3\u003e\n\u003cp\u003eNo. The specifications for the particular fitting version and all connected components are decisive. Also take temperature and operating conditions into account.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"50 mm - 5\/4\"","offer_id":65834694476125,"sku":"4333-50-5\/4","price":4.49,"currency_code":"EUR","in_stock":true},{"title":"50 mm - 6\/4\"","offer_id":65834694508893,"sku":"4333-50-6\/4","price":4.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 5\/4\"","offer_id":65834665476445,"sku":"4333-40-5\/4","price":2.99,"currency_code":"EUR","in_stock":false},{"title":"40 mm - 6\/4\"","offer_id":65834665509213,"sku":"4333-40-6\/4","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 3\/4\"","offer_id":65834665083229,"sku":"4333-25-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\"","offer_id":65834665115997,"sku":"4333-25-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 3\/4\"","offer_id":65834665148765,"sku":"4333-32-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"32 mm - 1\"","offer_id":65834665181533,"sku":"4333-32-1","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"40 mm - 1\"","offer_id":65834665214301,"sku":"4333-40-1","price":2.99,"currency_code":"EUR","in_stock":false},{"title":"20 mm - 1\/2\"","offer_id":65833887301981,"sku":"4333-20-1\/2","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"20 mm - 3\/4\"","offer_id":65834664919389,"sku":"4333-20-3\/4","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"25 mm - 1\/2\"","offer_id":65834664952157,"sku":"4333-25-1\/2","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-schlauchverbinder-auengewinde-12298656.jpg?v=1788728894"},{"product_id":"bewaesserungsschlauch-16-mm-erdanker-fuer-bis","title":"Ground pegs for irrigation hoses up to 16 mm, 18 cm, 50 pieces","description":"\u003cp\u003eThe brown ground pegs hold drip and irrigation hoses up to Ø 16 mm in the planned position. With a total length of 18 cm, they can be pushed into the soil and pulled out again when the layout changes. This keeps the irrigation line stable while filling and along its intended route.\u003c\/p\u003e\n\u003ch2\u003eSecure the hose in the bed\u003c\/h2\u003e\n\u003cp\u003eLay drip or irrigation hoses up to 16 mm in diameter in the desired position and secure them with the 18 cm ground anchors.\u003c\/p\u003e\n\u003ch2\u003eReusable for layout changes\u003c\/h2\u003e\n\u003cp\u003eThe brown plastic anchors can be pulled out and reused when the hose layout changes. Their colour blends unobtrusively into beds and planted areas.\u003c\/p\u003e\n\u003ch2\u003e50 fixing points for hose routing\u003c\/h2\u003e\n\u003cp\u003ePlace the holders wherever the line needs to stay in position, such as at changes of direction. The required spacing depends on the hose routing and soil condition.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e DSA-3118BR50\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Irrigation hoses up to Ø 16 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal length:\u003c\/strong\u003e 18 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Brown\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e Weather-resistant, reusable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePack contents:\u003c\/strong\u003e 50 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich hoses are the ground anchors suitable for?\u003c\/h3\u003e\n\u003cp\u003eThey are suitable for drip and irrigation hoses up to 16 mm in diameter.\u003c\/p\u003e\n\u003ch3\u003eHow long are the ground anchors?\u003c\/h3\u003e\n\u003cp\u003eThe total length is 18 cm.\u003c\/p\u003e\n\u003ch3\u003eHow many pieces are in the pack?\u003c\/h3\u003e\n\u003cp\u003eOne pack contains 50 ground anchors.\u003c\/p\u003e\n\u003ch3\u003eCan the anchors be reused?\u003c\/h3\u003e\n\u003cp\u003eYes. They can be pulled out and used again when the hose route changes.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65833981051229,"sku":"9285","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/1436136png-12298976.png?v=1788739402"},{"product_id":"bradas-tropfbewaesserungs-set-mit-25-stabtropfern","title":"Drip Irrigation Set with 25 Stake Drippers – Bradas","description":"\u003cp\u003eThe 25 stake drippers in this Bradas drip irrigation kit direct water precisely to individual potted and crop plants. Each dripper connects to the PE supply pipe via a 50 cm PVC hose. At 1 bar, the output is approximately 2.2 l\/h per dripper.\u003c\/p\u003e\n\u003ch2\u003eTargeted water delivery\u003c\/h2\u003e\n\u003cp\u003eInsert the stake drippers in the plants’ root area. Choose the straight or angled design to suit the available space. Water delivered through the labyrinth in the dripper replaces broad-area watering from above.\u003c\/p\u003e\n\u003ch2\u003eFlow rate and hose\u003c\/h2\u003e\n\u003cp\u003eThe 50 cm hoses provide space between the supply pipe and the plant. At 1 bar, each dripper delivers approximately 2.2 litres per hour. As the flow depends on pressure, the same water output cannot be guaranteed at every plant.\u003c\/p\u003e\n\u003ch2\u003eConnection to PE pipe\u003c\/h2\u003e\n\u003cp\u003eThe drippers connect directly to PE pipes measuring 16, 20 or 25 mm. Suitable openings in the pipe are required for installation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSet contents:\u003c\/strong\u003e 25 stake drippers, each with a 50 cm PVC hose and connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDripper technology:\u003c\/strong\u003e Labyrinth dripper, turbulent flow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFlow rate:\u003c\/strong\u003e Approx. 2.2 l\/h at 1 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose:\u003c\/strong\u003e PVC, 50 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Straight or angled\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e PE pipe Ø 16\/20\/25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow much water does each plant receive?\u003c\/h3\u003e\n\u003cp\u003eAt 1 bar, each dripper delivers approximately 2.2 litres per hour. The amount of water also depends on the operating time and the actual pressure at the dripper.\u003c\/p\u003e\n\u003ch3\u003eWhich pipes are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe drippers are intended for PE pipes measuring 16, 20 or 25 mm.\u003c\/p\u003e\n\u003ch3\u003eWhen is the angled design useful?\u003c\/h3\u003e\n\u003cp\u003eWhen the dripper needs to be positioned more effectively at a difficult-to-reach or laterally offset plant position.\u003c\/p\u003e\n\u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 25 individual stake drippers with 50 cm PVC hoses; the design is straight or angled.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Straight","offer_id":65833985179997,"sku":"9209-1","price":4.49,"currency_code":"EUR","in_stock":false},{"title":"Angle","offer_id":65834085646685,"sku":"9209-2","price":4.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/tropfbewsserung-winkel-kaufenjpg-12298971.jpg?v=1788738664"},{"product_id":"bradas-endstueck-fuer-16-mm-verlegerohr","title":"End cap for 16 mm irrigation pipe – Bradas","description":"\u003cp\u003eThe Bradas end cap closes open ends of 16 mm irrigation pipe in drip irrigation systems. Push it onto the pipe end, where it is held by clamping action. This keeps the line closed at the end and protects the inside from soil, sand and insects. It is suitable for irrigation solutions in gardens, greenhouses, raised beds and landscaping.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp\u003eInsert the pipe end directly into the end cap's socket; no additional tool or adhesive is required. The pipe end cap can be removed and reused elsewhere when the system is modified.\u003c\/p\u003e\n\u003ch2\u003eMaterial and application area\u003c\/h2\u003e\n\u003cp\u003eThe closure body is made from UV-stabilised plastic and is intended for frost-free use up to +60 °C. Its compact shape takes up little space in the pipe layout.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 16 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Pipe end closure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSealing principle:\u003c\/strong\u003e Press fit \/ clamping\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free push-fit installation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e Frost-free up to +60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReusable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Drip irrigation, raised beds, greenhouses, garden irrigation and landscaping\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e For drip irrigation up to approximately 4 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat pipe diameter is the end cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for 16 mm irrigation pipe with a 16 mm outside diameter.\u003c\/p\u003e\n\u003ch3\u003eHow is the end cap installed?\u003c\/h3\u003e\n\u003cp\u003ePush the end cap onto the open pipe end; it is held by clamping action. No tool or adhesive is required.\u003c\/p\u003e\n\u003ch3\u003eCan the pipe end closure be removed?\u003c\/h3\u003e\n\u003cp\u003eYes. It can be pulled off and reused when the system is modified.\u003c\/p\u003e\n\u003ch3\u003eHow many end caps are required?\u003c\/h3\u003e\n\u003cp\u003eOne end cap is required for each open pipe end.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain the irrigation system completely before frost. Water trapped in connections can expand when it freezes and damage components.\u003c\/p\u003e\n\u003ch3\u003eWhat water pressure is the connector designed for?\u003c\/h3\u003e\n\u003cp\u003eFor drip irrigation systems up to approximately 4 bar. The permitted pressure of the complete system depends on its weakest component. Check connections for secure fit and leaks after installation.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65834727506269,"sku":"3222","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/endstck-16mmjpg-12298409.jpg?v=1788728004"},{"product_id":"bradas-winkelstueck-fuer-16-mm-verlegerohr","title":"Elbow for 16 mm irrigation pipe – Bradas","description":"\u003cp\u003eThis Bradas elbow guides 16 mm irrigation pipe around a right-angle turn. The push-fit sockets connect two pipe sections without bending the pipe. This makes the connector suitable for bed edges, walls, greenhouses and other installation routes requiring a change of direction.\u003c\/p\u003e\n\u003ch2\u003eRoute pipe neatly around corners\u003c\/h2\u003e\n\u003cp\u003eThe elbow guides the line through a fixed 90° bend. Several connectors can be combined with short pipe sections where a system requires an offset or multiple changes of direction.\u003c\/p\u003e\n\u003ch2\u003eInstallation and material\u003c\/h2\u003e\n\u003cp\u003eConnect both pipe ends without adhesive or additional sealant. The UV-stabilised plastic is intended for frost-free use up to +60 °C. For liquid fertilisers and plant protection products, the active substance and concentration must be compatible with the material.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 × 16 mm push-fit socket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDeflection angle:\u003c\/strong\u003e 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSealing principle:\u003c\/strong\u003e Press fit \/ clamping\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free push-fit connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e For liquid fertilisers and plant protection products in irrigation water; check media compatibility\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e Frost-free up to +60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Drip irrigation, raised beds, greenhouses, gardening and landscaping, and balcony systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat change of direction does the elbow provide?\u003c\/h3\u003e\n\u003cp\u003eThe component guides 16 mm irrigation pipe through a 90° angle.\u003c\/p\u003e\n\u003ch3\u003eHow is the elbow installed?\u003c\/h3\u003e\n\u003cp\u003ePush both pipe ends into the push-fit sockets without using tools.\u003c\/p\u003e\n\u003ch3\u003eDoes the elbow cause pressure loss?\u003c\/h3\u003e\n\u003cp\u003eThe connector enables a change of direction without kinking the pipe. A bend can nevertheless cause flow losses. With many bends or long lines, check the available water volume and pressure at the end of the line.\u003c\/p\u003e\n\u003ch3\u003eCan I combine several elbows?\u003c\/h3\u003e\n\u003cp\u003eYes. Several elbows can be connected with short pipe sections for more complex pipe routes.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain the irrigation system completely before frost. Water trapped in connections can expand when it freezes and damage components.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65834728194397,"sku":"3223","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/winkelstck-16mmjpg-12298410.jpg?v=1788728009"},{"product_id":"bradas-schlauchverbinder-fuer-16-mm-verlegerohr","title":"Straight connector for 16 mm irrigation pipe – Bradas","description":"\u003cp\u003eThe straight Bradas connector joins two sections of 16 mm irrigation pipe in a straight line. It is suitable for extending a line, replacing a damaged section or making later changes to an irrigation system. Insert both pipe ends into the push-fit sockets; no additional tool is required.\u003c\/p\u003e\n\u003ch2\u003eFor extensions and repairs\u003c\/h2\u003e\n\u003cp\u003eA single cut in the pipe can be joined with one connector if the sound pipe ends meet without tension. If a longer damaged section must be replaced, one suitable intermediate piece and two connectors are required.\u003c\/p\u003e\n\u003ch2\u003ePush-fit installation without additional materials\u003c\/h2\u003e\n\u003cp\u003eThe connection works by press fit and clamping. The body is made from UV-stabilised plastic and is intended for frost-free use up to +60 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 × 16 mm push-fit socket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection type:\u003c\/strong\u003e Straight \/ inline\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSealing principle:\u003c\/strong\u003e Press fit \/ clamping\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free push-fit connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e Frost-free up to +60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Pipe extension, pipe repair and system expansion\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e For drip irrigation up to approximately 4 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat pipe size does the connector join?\u003c\/h3\u003e\n\u003cp\u003eThe component joins two lengths of 16 mm irrigation pipe.\u003c\/p\u003e\n\u003ch3\u003eWhat is the connector suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt can be used to extend a line, repair a damaged section or modify a system.\u003c\/p\u003e\n\u003ch3\u003eDo I need adhesive or PTFE tape?\u003c\/h3\u003e\n\u003cp\u003eNo. The pipe connection is designed as a push-fit connection with press fit and clamping.\u003c\/p\u003e\n\u003ch3\u003eCan the connection be disconnected?\u003c\/h3\u003e\n\u003cp\u003eThe push-fit connection can be disconnected when modifying the system; the pipe ends may need to be pulled out with some force.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain the irrigation system completely before frost. Water trapped in connections can expand when it freezes and damage components.\u003c\/p\u003e\n\u003ch3\u003eWhat water pressure is the connector designed for?\u003c\/h3\u003e\n\u003cp\u003eFor drip irrigation systems up to approximately 4 bar. The permitted pressure of the complete system depends on its weakest component. Check connections for secure fit and leaks after installation.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65834728423773,"sku":"3224","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schlauchverbinder-1jpg-12298411.jpg?v=1788728012"},{"product_id":"bradas-t-stueck-fuer-16-mm-verlegerohr","title":"T-piece for 16 mm irrigation pipe – Bradas","description":"\u003cp\u003eThe Bradas T-piece adds a side branch to a 16 mm irrigation line. Three equal-sized push-fit sockets accept the pipe ends and enable modular routing to several beds, planting rows or greenhouse areas. Installation is tool-free using the push-fit connections.\u003c\/p\u003e\n\u003ch2\u003eBranches in the pipe network\u003c\/h2\u003e\n\u003cp\u003eTwo connections lie in the main line and the third branches off to the side. A branch that is not yet required can be closed with a short suitable pipe section and an end cap.\u003c\/p\u003e\n\u003ch2\u003eConstruction and installation\u003c\/h2\u003e\n\u003cp\u003eAll three connections are intended for 16 mm irrigation pipe. The push-fit connection is held by press fit and clamping. The UV-stabilised plastic is intended for frost-free use up to +60 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 3 × 16 mm push-fit socket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 2 × 16 mm continuous main line, 1 × 16 mm side branch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSealing principle:\u003c\/strong\u003e Press fit \/ clamping\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Tool-free push-fit installation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e Frost-free up to +60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Drip irrigation, greenhouses, gardening and landscaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat pipe size fits the three connections?\u003c\/h3\u003e\n\u003cp\u003eAll three push-fit sockets are designed for 16 mm irrigation pipe.\u003c\/p\u003e\n\u003ch3\u003eHow does a line become a branch?\u003c\/h3\u003e\n\u003cp\u003eInsert the T-piece at the desired point in the main line; the side connection accepts the additional branch line.\u003c\/p\u003e\n\u003ch3\u003eCan a branch be closed later?\u003c\/h3\u003e\n\u003cp\u003eYes. An unused connection can be closed with a suitable end cap and, if necessary, a short section of pipe.\u003c\/p\u003e\n\u003ch3\u003eCan several T-pieces be used?\u003c\/h3\u003e\n\u003cp\u003eYes. Several T-pieces can be installed at different points in the pipe network. The available water volume and system pressure must suit the planned installation.\u003c\/p\u003e\n\u003ch3\u003eWhat should I consider before winter?\u003c\/h3\u003e\n\u003cp\u003eDrain the irrigation system completely before frost. Water trapped in connections can expand when it freezes and damage components.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Default Title","offer_id":65834729701725,"sku":"3225","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/t-stck-verbinder-1jpg-12298412.jpg?v=1788728016"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-kat-schlauche-sq-750_00fca9dd-7b5b-405a-890d-2bde1d75877c.jpg?v=1789139104","url":"https:\/\/brixoro.eu\/en-lu\/collections\/irrigation-pipes.oembed","provider":"Brixoro","version":"1.0","type":"link"}