{"title":"Workplace safety \u0026 protective equipment","description":"\u003cp\u003eChoosing protective equipment starts with the specific task and its hazards. Compare the documented properties of each product and consider how several pieces of equipment are worn together.\u003c\/p\u003e\u003ch2\u003eHow to narrow down your choice\u003c\/h2\u003e\u003col\u003e \u003cli\u003e \u003cstrong\u003eIdentify the specific hazard:\u003c\/strong\u003e Not just “workshop”, but noise, flying particles or a known dust exposure, for example. The required protective measure follows from the risk assessment.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eIdentify the protection needed:\u003c\/strong\u003e Match suitable equipment to each remaining hazard. More equipment alone does not resolve a conflict between two items worn at the same time.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eAssess the fit together:\u003c\/strong\u003e Glasses and a mask must fit simultaneously; a helmet affects the choice of hearing protection and visor. Look for the intended combinations.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePlan for ongoing use:\u003c\/strong\u003e Consider instruction, storage, spare parts and replacement needs. Buying a filter or internal fitting is different from buying a complete device.\u003c\/li\u003e \u003c\/ol\u003e\u003ch2\u003eFrom the requirement to the right category\u003c\/h2\u003e\u003cdiv class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Find the right category for your requirements\"\u003e\u003ctable\u003e \u003cthead\u003e\u003ctr\u003e \u003cth scope=\"col\"\u003eOption\u003c\/th\u003e \u003cth scope=\"col\"\u003eWhen to consider it\u003c\/th\u003e \u003cth scope=\"col\"\u003eKey comparison\u003c\/th\u003e \u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eEyes and face\u003c\/th\u003e \u003ctd\u003eWhen the task requires eye or face protection\u003c\/td\u003e \u003ctd\u003eCompare coverage, field of vision and compatibility with glasses or a helmet.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eHearing\u003c\/th\u003e \u003ctd\u003eWhen noise protection is required\u003c\/td\u003e \u003ctd\u003eThe required attenuation and other equipment worn at the same time determine the choice.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eBreathing\u003c\/th\u003e \u003ctd\u003eWhere an inhalation exposure has been identified\u003c\/td\u003e \u003ctd\u003eThe substance type, conditions of use and suitable respiratory interface must all be established.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eHead\u003c\/th\u003e \u003ctd\u003eFor the relevant mechanical hazards\u003c\/td\u003e \u003ctd\u003eBump caps and safety helmets meet different requirements; plan accessories as well.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eCommon questions before buying\u003c\/h2\u003e\u003ch3\u003eIs it enough to choose each item to fit individually?\u003c\/h3\u003e\u003cp\u003eNot always. Make a list of all items worn simultaneously and assess them as a combination. This reveals space requirements and possible conflicts at the temples, face or helmet mounting before you buy.\u003c\/p\u003e\u003ch3\u003eIs the strongest or largest model automatically better?\u003c\/h3\u003e\u003cp\u003eThe equipment must suit the assessed requirement and the wearer. A larger design may affect vision or mobility; a single rating does not describe overall suitability.\u003c\/p\u003e\u003ch3\u003eWhat else belongs on the shopping list besides the protective item itself?\u003c\/h3\u003e\u003cp\u003eDepending on the system, approved mounts, filters or spare parts may be needed. Separate complete equipment, accessories and consumables, and check this list against the package contents.\u003c\/p\u003e\u003ch2\u003eRelated categories to explore\u003c\/h2\u003e\u003cul\u003e \u003cli\u003e\u003ca href=\"\/en\/collections\/atemschutz\"\u003eRespiratory protection\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"\/en\/collections\/schutzbrillen-visiere\"\u003eEye and face protection\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"\/en\/collections\/gehorschutz\"\u003eHearing protection\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"\/en\/collections\/schutzhelme-anstosskappen\"\u003eHead protection\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eTechnical reference: \u003ca href=\"https:\/\/www.dguv.de\/ifa\/fachinfos\/persoenliche-schutzausruestungen-psa\/kombinationen-von-persoenlicher-schutzausruestung\/index.jsp\"\u003eDGUV: Combinations of personal protective equipment\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"climax-756-atemschutz-halbmaske-mit-2-a2-filtern","title":"Climax half-face respirator 756 with 2 A2 filters","description":"\u003cp\u003eThe Climax 756 is a reusable half mask with two A2 filters for organic gases and vapours. The cylindrical filters attach via two threaded connections. The flexible TPE mask body covers the nose and mouth, while an exhalation valve directs exhaled air outwards. The filters are replaceable and available separately.\u003c\/p\u003e\n\u003ch2\u003eConstruction and filter system\u003c\/h2\u003e\n\u003cp\u003eThe contents include two A2 filters, each with a diameter of 79 mm. The filters fit onto two threaded connections and can be replaced with suitable replacement filters from the 755\/756 system.\u003c\/p\u003e\n\u003ch2\u003eFit and filter type\u003c\/h2\u003e\n\u003cp\u003eThe half mask must form a close seal against the face; facial hair in the sealing area can impair protection. A2 filters are intended for organic gases and vapours with a boiling point above 65 °C and do not provide particle protection. The device does not supply oxygen and is not suitable for oxygen-deficient environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask material:\u003c\/strong\u003e Thermoplastic elastomer (TPE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e 2 × A2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter diameter:\u003c\/strong\u003e 79 mm, cylindrical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 threaded connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e 1 exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter system:\u003c\/strong\u003e Compatible with 755\/756 filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 141\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are the A2 filters intended for?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for organic gases and vapours with a boiling point above 65 °C, for example from certain solvents or paints. Selection must suit the substance and conditions of use.\u003c\/p\u003e\n\u003ch3\u003eDoes the half mask also protect against dust?\u003c\/h3\u003e\n\u003cp\u003eA2 filters are intended for gases and vapours and do not provide particle protection.\u003c\/p\u003e\n\u003ch3\u003eCan the mask be worn with a full beard?\u003c\/h3\u003e\n\u003cp\u003eA full beard in the sealing area can impair the seal.\u003c\/p\u003e\n\u003ch3\u003eHow are the filters attached?\u003c\/h3\u003e\n\u003cp\u003eThe two cylindrical filters attach via two threaded connections.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A1 and A2 filters?\u003c\/h3\u003e\n\u003cp\u003eBoth filter types are intended for organic gases and vapours with a boiling point above 65 °C. A2 has a higher gas absorption capacity than A1. This does not mean a higher protection factor for the half mask or a fixed service life.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the half-mask seal?\u003c\/h3\u003e\n\u003cp\u003eAdjust the straps correctly and carry out the seal check according to the instructions before each use. The mask edge must remain continuously against the skin; facial hair in the sealing line must not interfere with the seal.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64339074613597,"sku":"1332","price":21.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11821670.jpg?v=1777036430"},{"product_id":"hoegert-schutzbrille-mainz","title":"Högert “Mainz” safety glasses with polycarbonate lenses","description":"\u003cp\u003eThe Högert “Mainz” safety glasses combine polycarbonate lenses with a nylon frame, adjustable arms and a soft PVC nosepiece. EN 166, EN 170 and EN 172, as well as several lens colours, are specified for the model. The particular lens variant must be considered when selecting.\u003c\/p\u003e\n\u003ch2\u003eStandards and filter information\u003c\/h2\u003e\n\u003cp\u003eEN 166, EN 170 and EN 172 are specified for the model. Strength F at 45 m\/s, filter type 5 and shade number 5-3.1 are also listed.\u003c\/p\u003e\n\u003ch2\u003eMaterial and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lenses are made of polycarbonate and have a scratch-resistant coating. The frame is made of nylon. The arms can be adjusted from 5 to 15 mm. A soft PVC nosepiece and rimless lens system complete the design.\u003c\/p\u003e\n\u003ch2\u003eLens colours and use\u003c\/h2\u003e\n\u003cp\u003eClear, yellow and dark or black lenses are listed as variants. The glasses are not suitable for welding work.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Mainz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 166, EN 170, EN 172\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLenses:\u003c\/strong\u003e Polycarbonate, profiled, scratch-resistant coating\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStrength:\u003c\/strong\u003e F, 45 m\/s\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilters:\u003c\/strong\u003e UV filter according to EN 170; solar filter according to EN 172\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e Solar filter 5, shade number 5-3.1 only for the corresponding variant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOptical class:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArms:\u003c\/strong\u003e Adjustable, 5–15 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrame:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNosepiece:\u003c\/strong\u003e Soft PVC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLens system:\u003c\/strong\u003e Rimless\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLens variants:\u003c\/strong\u003e Clear, yellow or dark or black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat protective functions are specified for the glasses?\u003c\/h3\u003e\n\u003cp\u003eMechanical protection according to EN 166 and UV and sun protection according to EN 170 and EN 172 are specified.\u003c\/p\u003e\n\u003ch3\u003eHow can the arms be adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arms can be adjusted in length between 5 and 15 mm.\u003c\/p\u003e\n\u003ch3\u003eWhich lens colour is suitable for the application?\u003c\/h3\u003e\n\u003cp\u003eDepending on the variant, clear, yellow or dark or black lenses are listed. The specific filter assignment depends on the selected variant.\u003c\/p\u003e\n\u003ch3\u003eAre the glasses suitable for welding?\u003c\/h3\u003e\n\u003cp\u003eNo. The glasses are not designed for welding work and do not protect against welding light.\u003c\/p\u003e\n\u003ch3\u003eWhich materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe lenses are made of polycarbonate, the frame of nylon and the nosepiece of soft PVC.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Yellow","offer_id":64339229868381,"sku":"5416-G","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":64339229933917,"sku":"5416-S","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"Clear","offer_id":64339077464413,"sku":"5416-F","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k006jpg-11821669.jpg?v=1777037319"},{"product_id":"tams-bauhelm-mit-drehverschluss-en-397-en-50365-5361-cm","title":"TAMS safety helmet with wheel ratchet, EN 397 \/ EN 50365, 53–61 cm","description":"\u003cp\u003eThe TAMS safety helmet combines an HDPE shell with a six-point suspension. Use the wheel ratchet to adjust the head size from 53 to 61 cm. Three height positions and a fabric-covered sweatband allow adjustment to the head. Weighing 322 g, the helmet complies with EN 397 and EN 50365, class 0.\u003c\/p\u003e\n\u003ch2\u003eAdjusting the fit and wearing height\u003c\/h2\u003e\n\u003cp\u003eAdjust the head size and suspension height so that the helmet sits securely without pressure. The six attachment points connect the suspension to the shell. Keep the intended space between the head and shell clear and do not store objects in it.\u003c\/p\u003e\n\u003ch2\u003eMechanical and electrical head protection\u003c\/h2\u003e\n\u003cp\u003eEN 397 concerns the industrial safety helmet. The model is also specified to EN 50365 as a class 0 electrically insulating helmet for installations up to 1,000 V AC or 1,500 V DC. It is part of the protective equipment appropriate for the work and does not alone protect the whole body from electrical hazards.\u003c\/p\u003e\n\u003ch2\u003eAccessories and temperature range\u003c\/h2\u003e\n\u003cp\u003eThe helmet has a 30 mm accessory slot. Accessories must be expressly suitable for use with this helmet; slot width alone is not sufficient. The stated operating temperature range is −20 to +50 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnchor points:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 322 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wheel ratchet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e Adjustable in three height positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlot:\u003c\/strong\u003e 30 mm accessory slot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0; installations up to 1,000 V AC \/ 1,500 V DC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -20 to +50 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSweatband:\u003c\/strong\u003e Fabric-covered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the helmet to my head?\u003c\/h3\u003e\n\u003cp\u003eUse the wheel ratchet to adjust the head size. The range is 53 to 61 cm. Three height positions are also available. The helmet should remain secure when you tilt your head, without pressure points.\u003c\/p\u003e\n\u003ch3\u003eWill every accessory with a 30 mm mount fit?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount width only describes the mechanical size. Ear defenders, visors and other accessories must be suitable for use with this helmet and fitted according to the relevant instructions.\u003c\/p\u003e\n\u003ch3\u003eIs EN 397 sufficient evidence of electrical insulation?\u003c\/h3\u003e\n\u003cp\u003eNo. This helmet additionally specifies EN 50365, class 0, for that purpose. The suitability of the complete protective equipment and working method must match the electrical hazard.\u003c\/p\u003e\n\u003ch3\u003eMust I replace the helmet after a strong impact?\u003c\/h3\u003e\n\u003cp\u003eYes. Remove the helmet from service after a significant blow or impact, even if no external damage is visible. Otherwise, assess service life and replacement intervals using the manufacturer’s instructions and helmet marking.\u003c\/p\u003e\n\u003ch3\u003eHow should I store the safety helmet after work?\u003c\/h3\u003e\n\u003cp\u003eStore it clean and dry, protected from unnecessary heat and direct sunlight. Do not apply solvents or unauthorised paints or adhesives to the shell. Check the shell, suspension and fastenings before use.\u003c\/p\u003e","brand":"TAMS","offers":[{"title":"White","offer_id":64339100172637,"sku":"9158-w","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":64339095519581,"sku":"9158-ge","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":64339096764765,"sku":"9158-gr","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":64339100041565,"sku":"9158-r","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":64339095978333,"sku":"9158-g","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Arancio","offer_id":64339099976029,"sku":"9158-o","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":64339095585117,"sku":"9158-b","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/yellow-23jpg-11821674.jpg?v=1777037361"},{"product_id":"climax-756-atemschutz-halbmaske-mit-2-p3-filtern","title":"Climax half-face respirator 756 with 2 P3 filters","description":"\u003cp\u003eThe Climax 756 with two P3 filters is a reusable half mask for exposure to particles. Its flexible TPE mask body covers the nose and mouth. An exhalation valve directs exhaled air outwards, while the filters attach via two threaded connections.\u003c\/p\u003e\n\u003ch2\u003eP3 particle filters\u003c\/h2\u003e\n\u003cp\u003eThe two cylindrical P3 filters each have a diameter of 79 mm. P3 is the highest of the three particle-filter classes under EN 143 and is designed for solid and liquid particles. The filters do not retain gases or vapours.\u003c\/p\u003e\n\u003ch2\u003eReusable mask with replaceable filters\u003c\/h2\u003e\n\u003cp\u003eThe half mask can continue to be used with suitable replacement filters from the 755\/756 system. For an effective seal, the mask edge must sit closely against the skin.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask material:\u003c\/strong\u003e Thermoplastic elastomer (TPE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e 2 × P3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter size:\u003c\/strong\u003e Cylindrical, Ø 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 threaded connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e 1 exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 143\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the P3 filter protect against gases?\u003c\/h3\u003e\n\u003cp\u003eNo. P3 filters are intended for particles, not gases and vapours.\u003c\/p\u003e\n\u003ch3\u003eWhat should be considered when wearing the mask with a beard?\u003c\/h3\u003e\n\u003cp\u003eFacial hair in the sealing area can impair the half-mask seal.\u003c\/p\u003e\n\u003ch3\u003eHow are the filters attached?\u003c\/h3\u003e\n\u003cp\u003eThe two filters attach to the half mask via threaded connections.\u003c\/p\u003e\n\u003ch3\u003eAre the filters suitable for every dusty workplace?\u003c\/h3\u003e\n\u003cp\u003eNo. Suitability depends on the type and concentration of particles, the workplace and the risk assessment.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the half-mask seal?\u003c\/h3\u003e\n\u003cp\u003eAdjust the straps correctly and carry out the seal check according to the instructions before each use. The mask edge must remain continuously against the skin; facial hair in the sealing line must not interfere with the seal.\u003c\/p\u003e\n\u003ch3\u003eWhen should the particle filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace them if damaged, heavily soiled or if breathing resistance increases noticeably. The instructions may specify further service limits; there is no fixed service life for all workplaces.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64594663014749,"sku":"1333","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11821670.jpg?v=1777036430"},{"product_id":"climax-761-atemschutz-halbmaske-mit-a1b1e1k1-mehrbereichsgasfilter","title":"Climax half-face respirator 761 with A1B1E1K1 multi-gas filter","description":"\u003cp\u003eThe Climax 761 is a reusable half mask with an A1B1E1K1 multi-purpose gas filter for work areas involving different gases and vapours. The filter attaches centrally via a threaded connection. The flexible TPE mask body covers the nose and mouth, while two exhalation valves direct exhaled air outwards. Replacement filters are available separately.\u003c\/p\u003e\n\u003ch2\u003eMulti-purpose gas filter for several substance groups\u003c\/h2\u003e\n\u003cp\u003eThe filter combines types A1, B1, E1 and K1: A1 for organic gases and vapours with a boiling point above 65 °C, B1 for inorganic gases and vapours except carbon monoxide, E1 for acidic gases, and K1 for ammonia and organic derivatives.\u003c\/p\u003e\n\u003ch2\u003eConstruction and filter replacement\u003c\/h2\u003e\n\u003cp\u003eThe single central threaded connection allows the cylindrical filter to be changed without tools. The half mask must sit closely against the skin; a full beard in the sealing area can impair the seal. The device does not supply oxygen and is not suitable for oxygen-deficient environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 761\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask material:\u003c\/strong\u003e Thermoplastic elastomer (TPE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e A1B1E1K1 multi-purpose gas filter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 1 central threaded connection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExhalation valves:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter system:\u003c\/strong\u003e Climax 760\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 141\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does A1B1E1K1 stand for?\u003c\/h3\u003e\n\u003cp\u003eA1 denotes organic gases and vapours with a boiling point above 65 °C; B1 denotes inorganic gases and vapours except carbon monoxide; E1 denotes acidic gases; K1 denotes ammonia and organic derivatives. Selection must suit the substance and conditions of use.\u003c\/p\u003e\n\u003ch3\u003eDoes the multi-purpose gas filter protect against dust?\u003c\/h3\u003e\n\u003cp\u003eNo. The A1B1E1K1 filter does not provide particle protection. Where there is additional particle exposure, an approved combined gas and particle filter system is required.\u003c\/p\u003e\n\u003ch3\u003eHow is the filter replaced?\u003c\/h3\u003e\n\u003cp\u003eThe filter is fitted to a central threaded connection and can be replaced without tools.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the half-mask seal?\u003c\/h3\u003e\n\u003cp\u003eAdjust the straps correctly and carry out the seal check according to the instructions before each use. The mask edge must remain continuously against the skin; facial hair in the sealing line must not interfere with the seal.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64594663080285,"sku":"1334","price":20.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11942438.jpg?v=1777922345"},{"product_id":"atemschutz-halbmaske-climax-profi-761-mit-a1-filter","title":"Climax half-face respirator 761 with A1 gas filter","description":"\u003cp\u003eThe Climax 761 is a TPE half mask with an A1 filter from the 760 series, a threaded connection and two exhalation valves. Filter type A1 is classified for suitable organic gases and vapours. Filter marking, mask model and instructions for use are decisive when selecting the correct equipment.\u003c\/p\u003e\n\u003ch2\u003eUse the mask and filter together correctly\u003c\/h2\u003e\n\u003cp\u003eThe 761 and 760 filter family are designed to work together. Before use, the filter marking and mask model must match.\u003c\/p\u003e\n\u003ch2\u003eReplacing the filter on the 761\u003c\/h2\u003e\n\u003cp\u003eTo replace it, loosen the used filter from the connection and fit a suitable 760 version. The instructions for use specify the permitted procedure.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMask model:\u003c\/strong\u003e Climax 761\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask material:\u003c\/strong\u003e TPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e A1, 760 series\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExhalation valves:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 140:1998\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich filter family fits the 761?\u003c\/h3\u003e\n\u003cp\u003eThe 760 filter family is intended for the Climax 761. The specific filter class must be suitable for the application.\u003c\/p\u003e\n\u003ch3\u003eHow is the filter replaced?\u003c\/h3\u003e\n\u003cp\u003eLoosen the filter at the connection and replace it with a suitable 760 version. Follow the instructions for use.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe half mask with the specified A1 filter. Additional replacement filters are not automatically included.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64594663145821,"sku":"1335","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11942438.jpg?v=1777922345"},{"product_id":"10-ffp1-atemschutzmasken-mit-ausatmungsventil","title":"10 FFP1 respirator masks with exhalation valve","description":"\u003cp\u003eThese FFP1 respirator masks are designed for exposure to particulate matter. The exhalation valve can reduce heat and moisture under the mask. An adjustable nose clip with foam padding and flexible elastic straps support adjustment to the face.\u003c\/p\u003e\n\u003ch2\u003eFeatures and fit\u003c\/h2\u003e\n\u003cp\u003eThe nose clip can be adjusted to the shape of the face and has foam padding. The exhalation valve directs exhaled air outwards. The masks are disposable and supplied in a pack of ten.\u003c\/p\u003e\n\u003ch2\u003eParticle filtration\u003c\/h2\u003e\n\u003cp\u003eFFP1 is intended for exposure to particulate matter. Whether this protection class is sufficient for a particular workplace depends on the hazardous substance, concentration and risk assessment. Gases and oxygen deficiency are not covered.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProtection class:\u003c\/strong\u003e FFP1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 149\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNose clip:\u003c\/strong\u003e Adjustable, with foam padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetention:\u003c\/strong\u003e Flexible elastic straps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Disposable product\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePack contents:\u003c\/strong\u003e 10 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hazards is FFP1 designed for?\u003c\/h3\u003e\n\u003cp\u003eFFP1 is intended for exposure to particulate matter, provided the risk assessment permits this protection class.\u003c\/p\u003e\n\u003ch3\u003eWhat does the exhalation valve do?\u003c\/h3\u003e\n\u003cp\u003eThe valve directs warm, moist exhaled air outwards; exhaled air is not passed through the filter layer. The seal must comply with the manufacturer's instructions. Facial hair can impair the seal.\u003c\/p\u003e\n\u003ch3\u003eHow many masks are in the pack?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains ten disposable masks.\u003c\/p\u003e\n\u003ch3\u003eWhen must the mask be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace the disposable mask after use and if it becomes wet, damaged or noticeably harder to breathe through.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":64595051577693,"sku":"288","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940449.jpg?v=1777919874"},{"product_id":"ventil-ffp3-10-stk-atemschutzmasken","title":"10 FFP3 respirator masks with exhalation valve","description":"\u003cp\u003eThese FFP3 respirator masks are intended for particulate hazards. The exhalation valve can reduce heat and moisture beneath the mask. An adjustable nose bridge with foam padding supports an individual fit.\u003c\/p\u003e\n\u003ch2\u003eConstruction and fit\u003c\/h2\u003e\n\u003cp\u003eThe nose bridge can be adjusted to the shape of the face. The exhalation valve directs exhaled air outwards. The masks are disposable products and are supplied in a pack of ten.\u003c\/p\u003e\n\u003ch2\u003eParticle filtration\u003c\/h2\u003e\n\u003cp\u003eFFP3 filters particulate hazards with at least 99% filtration performance under standardised test conditions. Gases and oxygen deficiency are not covered. The specific selection depends on the hazardous substance, concentration and risk assessment.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProtection class:\u003c\/strong\u003e FFP3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFiltration performance:\u003c\/strong\u003e At least 99% under standardised test conditions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNose bridge:\u003c\/strong\u003e Adjustable, with foam padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInner surface:\u003c\/strong\u003e Soft and skin-friendly\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Disposable product\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePack contents:\u003c\/strong\u003e 10 pieces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 149\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat hazards is FFP3 intended for?\u003c\/h3\u003e\n\u003cp\u003eFFP3 filters particles. The specific selection depends on the hazardous substance, concentration and risk assessment. The mask does not protect against gases or oxygen deficiency.\u003c\/p\u003e\n\u003ch3\u003eWhat function does the exhalation valve have?\u003c\/h3\u003e\n\u003cp\u003eThe valve directs warm and moist exhaled air outwards. The exhaled air is not filtered in the same way, so the valve does not provide corresponding protection for others.\u003c\/p\u003e\n\u003ch3\u003eHow many masks are in the pack?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains ten disposable masks.\u003c\/p\u003e\n\u003ch3\u003eWhen must the mask be changed?\u003c\/h3\u003e\n\u003cp\u003eThe disposable mask must be changed after use and if it becomes damp, damaged or noticeably harder to breathe through.\u003c\/p\u003e\n\u003ch3\u003eWhat matters for a tight fit?\u003c\/h3\u003e\n\u003cp\u003eThe fit should be checked before each use according to the manufacturer’s instructions. Facial hair in the sealing area and an unsuitable face shape can impair the seal.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":64595051675997,"sku":"290","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940453.jpg?v=1777919902"},{"product_id":"atemschutz-halbmaske-climax-755-mit-a1-filtern","title":"Climax 755 half-mask respirator with A1 filters","description":"\u003cp\u003eThe Climax 755 half mask is supplied with two A1 filters for organic gases and vapours with a boiling point above 65 °C. The flexible black rubber mask body covers the nose and mouth. The filters are replaceable via threaded connections, while an exhalation valve directs exhaled air outwards.\u003c\/p\u003e\n\u003ch2\u003eDesign and filter replacement\u003c\/h2\u003e\n\u003cp\u003eThe two cylindrical A1 filters are attached to the side connections and can be replaced when required. Replacement filters are available separately. The half mask covers the nose and mouth and provides no eye protection.\u003c\/p\u003e\n\u003ch2\u003eSelect correctly before use\u003c\/h2\u003e\n\u003cp\u003eA1 filters are intended for organic gases and vapours with a boiling point above 65 °C. Selection must take account of the hazardous substance, concentration, oxygen content, duration of use and other workplace conditions, based on the instructions for use and risk assessment.\u003c\/p\u003e\n\u003ch2\u003eCheck the seal before every use\u003c\/h2\u003e\n\u003cp\u003eAdjust the head and neck straps so that the sealing line rests evenly against the skin. Carry out the seal check according to the instructions before every use. Facial hair in the sealing area may prevent an effective seal. The half mask does not supply oxygen and is unsuitable for oxygen-deficient environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMask model:\u003c\/strong\u003e Climax 755\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter:\u003c\/strong\u003e 2 × A1, cylindrical, Ø 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask body:\u003c\/strong\u003e Flexible black thermoplastic rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 threaded connections of the 755\/756 system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter replacement:\u003c\/strong\u003e Replaceable filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 141\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich filters are included?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two A1 filters.\u003c\/p\u003e\n\u003ch3\u003eWhich substance groups are A1 filters intended for?\u003c\/h3\u003e\n\u003cp\u003eA1 filters are intended for organic gases and vapours with a boiling point above 65 °C.\u003c\/p\u003e\n\u003ch3\u003eCan the filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eYes, the filters are attached via threaded connections and are replaceable.\u003c\/p\u003e\n\u003ch3\u003eDoes the half mask also protect the eyes?\u003c\/h3\u003e\n\u003cp\u003eNo. A half mask covers the nose and mouth. Separate suitable safety goggles are required for eye protection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A1 and A2 filters?\u003c\/h3\u003e\n\u003cp\u003eBoth filter types are intended for organic gases and vapours with a boiling point above 65 °C. A2 has a higher gas adsorption capacity than A1. This does not mean a higher protection factor for the half mask or a fixed service life.\u003c\/p\u003e\n\u003ch3\u003eAre these filters sufficient for spray painting?\u003c\/h3\u003e\n\u003cp\u003eA1 filters retain gases and vapours in filter group A but provide no particle protection against paint mist or dust. Spray painting may also involve particles and other hazardous substances; the respiratory protection system must be suitable according to the risk assessment.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595103547741,"sku":"1026","price":16.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940339.jpg?v=1777921116"},{"product_id":"atemschutz-halbmaske-climax-755-mit-a2-filtern","title":"Climax 755 half-mask respirator with A2 filters","description":"\u003cp\u003eThe Climax 755 half mask is supplied with two A2 filters for organic gases and vapours with a boiling point above 65 °C. The flexible black rubber mask body covers the nose and mouth. The filters can be replaced via threaded connections, while an exhalation valve directs exhaled air outwards.\u003c\/p\u003e\n\u003ch2\u003eA2 filters and mask design\u003c\/h2\u003e\n\u003cp\u003eThe two cylindrical A2 filters are fitted to the side connections and can be replaced. The half mask protects the nose and mouth but does not cover the eyes.\u003c\/p\u003e\n\u003ch2\u003eSelect the application correctly\u003c\/h2\u003e\n\u003cp\u003eA2 filters are intended for organic gases and vapours with a boiling point above 65 °C. Whether this filter class is sufficient for a particular workplace depends, among other factors, on the hazardous substance, concentration, oxygen content and duration of use.\u003c\/p\u003e\n\u003ch2\u003eCheck the seal before every use\u003c\/h2\u003e\n\u003cp\u003eAdjust the head and neck straps so that the sealing line rests evenly against the skin. Carry out the seal check according to the instructions before every use. Facial hair in the sealing area may prevent an effective seal. The half mask does not supply oxygen and is unsuitable for oxygen-deficient environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMask model:\u003c\/strong\u003e Climax 755\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter:\u003c\/strong\u003e 2 × A2, cylindrical, Ø 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask body:\u003c\/strong\u003e Flexible black thermoplastic rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 threaded connections of the 755\/756 system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter replacement:\u003c\/strong\u003e Replaceable filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 14387\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich filter class is included?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two A2 filters.\u003c\/p\u003e\n\u003ch3\u003eWhich substance groups are A2 filters intended for?\u003c\/h3\u003e\n\u003cp\u003eA2 filters are intended for organic gases and vapours with a boiling point above 65 °C.\u003c\/p\u003e\n\u003ch3\u003eDo the filters fit the 755\/756 system?\u003c\/h3\u003e\n\u003cp\u003eThe filters are replaceable on the 755\/756 system.\u003c\/p\u003e\n\u003ch3\u003eDoes the half mask protect the eyes?\u003c\/h3\u003e\n\u003cp\u003eNo. The half mask covers the nose and mouth; separate suitable eye protection is required.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A1 and A2 filters?\u003c\/h3\u003e\n\u003cp\u003eBoth filter types are intended for organic gases and vapours with a boiling point above 65 °C. A2 has a higher gas adsorption capacity than A1. This does not mean a higher protection factor for the half mask or a fixed service life.\u003c\/p\u003e\n\u003ch3\u003eAre these filters sufficient for spray painting?\u003c\/h3\u003e\n\u003cp\u003eA2 filters retain gases and vapours in filter group A but provide no particle protection against paint mist or dust. Spray painting may also involve particles and other hazardous substances; the respiratory protection system must be suitable according to the risk assessment.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595103646045,"sku":"1028","price":19.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940339.jpg?v=1777921116"},{"product_id":"atemschutz-halbmaske-climax-755-mit-a1b1e1k1p3-kombinationsfiltern","title":"Climax 755 respirator half mask with A1B1E1K1P3 combination filters","description":"\u003cp\u003eThe Climax 755 half mask is supplied with two A1B1E1K1P3 combination filters. The filter system covers A1, B1, E1 and K1 for the specified gas and vapour groups, as well as P3 for particles. The flexible mask body covers the nose and mouth; the filters are replaceable via side connections.\u003c\/p\u003e\n\u003ch2\u003eCombined gas and particle filter\u003c\/h2\u003e\n\u003cp\u003eA1 is intended for organic gases and vapours with a boiling point above 65 °C, B1 for inorganic gases except carbon monoxide, E1 for acidic gases, and K1 for ammonia and organic ammonia derivatives. P3 denotes the particle-filter component. The substance, concentration and conditions of use determine whether the combination is sufficient for the workplace.\u003c\/p\u003e\n\u003ch2\u003eHalf-mask construction\u003c\/h2\u003e\n\u003cp\u003eTwo side-mounted filters supply the half mask, while the exhalation valve directs exhaled air outwards. The mask covers the nose and mouth but has no integrated eye protection.\u003c\/p\u003e\n\u003ch2\u003eCheck the seal before every use\u003c\/h2\u003e\n\u003cp\u003eAdjust the head and neck straps so that the sealing line rests evenly against the skin. Carry out the seal check according to the instructions before every use. Facial hair in the sealing area may prevent an effective seal. The half mask does not supply oxygen and is unsuitable for oxygen-deficient conditions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMask model:\u003c\/strong\u003e Climax 755\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilters:\u003c\/strong\u003e 2 × A1B1E1K1P3 combination filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGas-filter classes:\u003c\/strong\u003e A1, B1, E1 and K1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle filter:\u003c\/strong\u003e P3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMask body:\u003c\/strong\u003e Flexible black thermoplastic rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 threaded connections of the 755\/756 system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 14387\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat filter marking do the included filters have?\u003c\/h3\u003e\n\u003cp\u003eThe two combination filters are marked A1B1E1K1P3.\u003c\/p\u003e\n\u003ch3\u003eWhich areas do the filter classes cover?\u003c\/h3\u003e\n\u003cp\u003eA1 is intended for organic gases and vapours with a boiling point above 65 °C, B1 for inorganic gases except carbon monoxide, E1 for acidic gases, and K1 for ammonia and organic ammonia derivatives. P3 denotes the particle-filter component.\u003c\/p\u003e\n\u003ch3\u003eDoes the half mask protect the eyes?\u003c\/h3\u003e\n\u003cp\u003eNo. The half mask covers the nose and mouth. Separate eye protection may be required depending on the risk assessment.\u003c\/p\u003e\n\u003ch3\u003eCan the filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eThe filters are replaceable on the 755\/756 system.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595103678813,"sku":"1029","price":28.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940339.jpg?v=1777921116"},{"product_id":"halbmaske-climax-2x-ersatzfilter-a2-755-756","title":"A2 replacement filters for Climax 755\/756, 2 pieces","description":"\u003cp\u003eThe set contains two A2 replacement filters for Climax 755 and 756 half masks. The threaded connection is designed for this mask system. A2 is classified for organic gases and vapours with a boiling point above 65 °C. Suitability depends on the hazardous substance, concentration, oxygen content and risk assessment.\u003c\/p\u003e\n\u003ch2\u003eSuitable for Climax 755 and 756\u003c\/h2\u003e\n\u003cp\u003eThe two filters are inserted into the side threaded mounts of a compatible half mask. Before replacement, the mask model and filter marking must match.\u003c\/p\u003e\n\u003ch2\u003eGas filter or particle filter?\u003c\/h2\u003e\n\u003cp\u003eA2 is a gas filter type for organic gases and vapours with a boiling point above 65 °C. The filter is not a standalone particle filter; where particles are present, the appropriate filter marking is required.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e A2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMasks:\u003c\/strong\u003e Climax 755 and 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 2 replacement filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 14387:2004+A1:2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich masks does the filter fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits compatible Climax 755 and 756 half masks with the matching threaded connection.\u003c\/p\u003e\n\u003ch3\u003eIs A2 suitable for dust?\u003c\/h3\u003e\n\u003cp\u003eNo. A2 is classified as a gas filter for organic gases and vapours; particle protection is not specified.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eTwo A2 replacement filters. A half mask is not included in the filter set.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595104596317,"sku":"1043","price":16.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/filter-a2jpg-11940353.jpg?v=1777921159"},{"product_id":"halbmaske-climax-2x-ersatzfilter-a1-755-756","title":"A1 replacement filters for Climax 755 and 756 half masks","description":"\u003cp\u003eThe set contains two A1 replacement filters for Climax 755 and 756 half masks. The threaded connection is designed for this mask system. A1 is classified for organic gases and vapours with a boiling point above 65 °C. Suitability depends on the hazardous substance, concentration, oxygen content and risk assessment.\u003c\/p\u003e\n\u003ch2\u003eSuitable for Climax 755 and 756\u003c\/h2\u003e\n\u003cp\u003eThe two filters are inserted into the side threaded mounts of a compatible half mask. Before replacement, the mask model and filter marking must match.\u003c\/p\u003e\n\u003ch2\u003eGas filter or particle filter?\u003c\/h2\u003e\n\u003cp\u003eA1 is a gas filter type for organic gases and vapours with a boiling point above 65 °C. The filter is not a standalone particle filter; where particles are present, the appropriate filter marking is required.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e A1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMasks:\u003c\/strong\u003e Climax 755 and 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 2 replacement filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 14387:2004+A1:2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich masks does the filter fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits compatible Climax 755 and 756 half masks with the matching threaded connection.\u003c\/p\u003e\n\u003ch3\u003eIs A1 suitable for dust?\u003c\/h3\u003e\n\u003cp\u003eNo. A1 is classified as a gas filter for organic gases and vapours; particle protection is not specified.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eTwo A1 replacement filters. A half mask is not included in the filter set.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595104760157,"sku":"1044","price":12.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/filter-a1jpg-11943026.jpg?v=1777921164"},{"product_id":"climax-ffp2-atemschutzmasken-mit-ausatmungsventil","title":"Climax FFP2 Respirators with Exhalation Valve","description":"\u003cp\u003eThese FFP2 respirators are designed to protect against solid and liquid particles and aerosols. A front-mounted exhalation valve helps discharge warm, humid exhaled air. The nose clip, foam padding and round shape support adjustment to the face. Each of the twelve respirators is individually wrapped.\u003c\/p\u003e\n\u003ch2\u003eFeatures and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe mouldable nose clip allows adjustment around the nose. Foam padding can improve contact comfort. Flexible elastic straps hold the respirator against the face; the fit must be checked before every use.\u003c\/p\u003e\n\u003ch2\u003eParticulate filtration\u003c\/h2\u003e\n\u003cp\u003eThe FFP2 class and EN 149 standard apply to particulate-filtering half masks. This respirator is designed for particles and does not replace suitable respiratory protection against gases or vapours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProtection class:\u003c\/strong\u003e FFP2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 149\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter medium:\u003c\/strong\u003e Particulate filter; at least 94% filtration efficiency under the test conditions of EN 149\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Front-mounted exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNose area:\u003c\/strong\u003e Metal clip and foam padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStraps:\u003c\/strong\u003e Flexible elastic straps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 12 pieces, individually wrapped in a dispenser box\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacture:\u003c\/strong\u003e EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is an FFP2 respirator designed for?\u003c\/h3\u003e\n\u003cp\u003eProtection against solid and liquid particles and aerosols.\u003c\/p\u003e\n\u003ch3\u003eWhat does the exhalation valve do?\u003c\/h3\u003e\n\u003cp\u003eIt discharges some of the warm, humid exhaled air to the outside.\u003c\/p\u003e\n\u003ch3\u003eHow many respirators are in the pack?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains twelve individually wrapped respirators.\u003c\/p\u003e\n\u003ch3\u003eDoes the respirator also protect against gases and vapours?\u003c\/h3\u003e\n\u003cp\u003eNo. FFP2 respirators are designed for particles; suitable gas filtration is required for gases and vapours.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595105087837,"sku":"1058","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940343.jpg?v=1777921128"},{"product_id":"climax-ffp3-atemschutzmasken-mit-ausatmungsventil","title":"Climax FFP3 Respirators with Exhalation Valve","description":"\u003cp\u003eThese FFP3 respirators are designed to protect against solid and liquid particles and aerosols. The front-mounted exhalation valve discharges warm, humid exhaled air. A mouldable nose clip, foam padding and flexible elastic straps support adjustment. The twelve respirators are supplied individually wrapped in a dispenser box.\u003c\/p\u003e\n\u003ch2\u003eConstruction and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe nose clip can be shaped to the bridge of the nose, while the foam padding supplements the contact area. Flexible elastic straps hold the respirator against the face. Before use, check that it fits correctly and seals properly.\u003c\/p\u003e\n\u003ch2\u003eProtection against particles\u003c\/h2\u003e\n\u003cp\u003eFFP3 and EN 149 identify a particulate-filtering half mask. This respirator is intended for particles and aerosols and is not designed to protect against gases or vapours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProtection class:\u003c\/strong\u003e FFP3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 149\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter medium:\u003c\/strong\u003e Particulate filter; at least 99% filtration efficiency under the test conditions of EN 149\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Front-mounted exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNose area:\u003c\/strong\u003e Metal clip and foam padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStraps:\u003c\/strong\u003e Flexible elastic straps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 12 pieces, individually wrapped in a dispenser box\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacture:\u003c\/strong\u003e EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the FFP3 respirator designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed to protect against solid and liquid particles and aerosols.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between FFP3 and FFP2?\u003c\/h3\u003e\n\u003cp\u003eFFP3 requires at least 99% filtration efficiency, while FFP2 requires at least 94% under the test conditions of EN 149. The protection provided during wear also depends on a good face seal.\u003c\/p\u003e\n\u003ch3\u003eWhat does the exhalation valve do?\u003c\/h3\u003e\n\u003cp\u003eIt discharges warm, humid exhaled air to the outside.\u003c\/p\u003e\n\u003ch3\u003eHow many respirators are included?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains twelve individually wrapped respirators.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595105349981,"sku":"1059","price":20.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940343.jpg?v=1777921128"},{"product_id":"schweisseraermel-rindsleder","title":"Welding sleeves made from cowhide, 460 mm, 1 pair","description":"\u003cp\u003eThe welding sleeves made from genuine cowhide cover the forearms during work involving flying sparks and hot splashes. At 460 mm long, they extend from the wrist to above the elbow. The pair supplements suitable welding protective clothing.\u003c\/p\u003e\n\u003ch2\u003eCoverage and use\u003c\/h2\u003e\n\u003cp\u003eThe 460 mm-long sleeves provide broad forearm coverage. They are intended as supplementary arm protection during welding, flame cutting, soldering, grinding and foundry work.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cp\u003eThe delivery includes one pair with two sleeves for both arms. The sleeves can be combined with other suitable protective clothing; they do not replace complete body, hand or face protection.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Genuine cowhide\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 460 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection area:\u003c\/strong\u003e Forearm, from the wrist to above the elbow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 1 pair, 2 pieces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAreas of use:\u003c\/strong\u003e Welding, flame cutting, grinding, soldering and foundry work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat material are the sleeves made from?\u003c\/h3\u003e\n\u003cp\u003eGenuine cowhide.\u003c\/p\u003e\n\u003ch3\u003eHow long are the welding sleeves?\u003c\/h3\u003e\n\u003cp\u003eThe sleeves are 460 mm long and extend from the wrist to above the elbow.\u003c\/p\u003e\n\u003ch3\u003eHow many sleeves are included?\u003c\/h3\u003e\n\u003cp\u003eOne pair, meaning two pieces.\u003c\/p\u003e\n\u003ch3\u003eCan the sleeves be worn with a welding jacket?\u003c\/h3\u003e\n\u003cp\u003eYes, they are intended as supplementary arm protection together with suitable welding protective clothing.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":64595105481053,"sku":"1081","price":7.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11943035.jpg?v=1777921186"},{"product_id":"schweisserschuerze-60-cm-90-rindspaltleder","title":"Welding apron made from cow split leather, 90 × 60 cm","description":"\u003cp\u003eThe welding apron made from 1.2 to 1.4 mm-thick cow split leather covers the chest and abdomen during welding, flame cutting, grinding and angle-grinding work. Measuring 90 × 60 cm, it provides broad upper-body coverage. Neck and waist straps hold the apron against the body.\u003c\/p\u003e\n\u003ch2\u003eProtection area and fastening\u003c\/h2\u003e\n\u003cp\u003eThe dimensions of 90 × 60 cm are given as height × width. The neck strap supports the apron at the top, while the waist strap stabilises its position. Additional protective equipment is required for the arms, hands, neck and legs.\u003c\/p\u003e\n\u003ch2\u003eCow split leather in use\u003c\/h2\u003e\n\u003cp\u003eThe apron is made from cow split leather and is intended for work involving flying sparks and hot splashes. It can be combined with suitable welding sleeves or a welding jacket.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cow split leather\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLeather thickness:\u003c\/strong\u003e 1.2 to 1.4 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 90 × 60 cm, height × width\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection area:\u003c\/strong\u003e Chest and abdomen\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUpper fastening:\u003c\/strong\u003e Neck strap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLower fastening:\u003c\/strong\u003e Waist strap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAreas of use:\u003c\/strong\u003e Welding, flame cutting, angle grinding, grinding and foundry work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are the dimensions of the welding apron?\u003c\/h3\u003e\n\u003cp\u003eIt measures 90 × 60 cm; the dimensions are given as height × width.\u003c\/p\u003e\n\u003ch3\u003eHow thick is the leather?\u003c\/h3\u003e\n\u003cp\u003eThe cow split leather is 1.2 to 1.4 mm thick.\u003c\/p\u003e\n\u003ch3\u003eWhich areas of the body does the apron cover?\u003c\/h3\u003e\n\u003cp\u003eIt covers the chest and abdomen. Additional protective clothing is required for the arms and other body areas.\u003c\/p\u003e\n\u003ch3\u003eHow is the apron fastened?\u003c\/h3\u003e\n\u003cp\u003eWith a neck strap and a waist strap.\u003c\/p\u003e\n\u003ch3\u003eCan the apron be worn with welding sleeves?\u003c\/h3\u003e\n\u003cp\u003eYes, it can be combined with suitable welding sleeves.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":64595105546589,"sku":"1082","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11943036.jpg?v=1777921189"},{"product_id":"schweisserjacke-klettverschluss-rindsvollleder-en-470-1","title":"Full-grain cowhide welding jacket with concealed hook-and-loop fastening","description":"\u003cp\u003eThe full-grain cowhide welding jacket covers the upper body, arms and neck area during welding, flame cutting, foundry, furnace and angle-grinding work. The concealed hook-and-loop fastening closes the front, and the stand-up collar is lined. The jacket is one size and approximately 85 cm long.\u003c\/p\u003e\n\u003ch2\u003eConstruction and coverage\u003c\/h2\u003e\n\u003cp\u003eFull-grain cowhide forms the jacket\u0026#x27;s outer material. The front closes with a concealed hook-and-loop fastening, and the stand-up collar is lined. The sleeves are approximately 54 cm long on the inside and 64 cm on the outside.\u003c\/p\u003e\n\u003ch2\u003eSize and dimensions\u003c\/h2\u003e\n\u003cp\u003eThe one-size design has a waist width of approximately 138 cm. Before purchase, compare the jacket length, waist width and sleeve lengths with your own work clothing and the required freedom of movement.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Full-grain cowhide\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e One size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJacket length:\u003c\/strong\u003e Approx. 85 cm from collar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWaist width:\u003c\/strong\u003e Approx. 138 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSleeve length:\u003c\/strong\u003e Approx. 54 cm inside, approx. 64 cm outside\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Concealed hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCollar:\u003c\/strong\u003e Lined stand-up collar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAreas of use:\u003c\/strong\u003e Welding, flame cutting, casting, angle grinding and furnace work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are the dimensions of the one-size jacket?\u003c\/h3\u003e\n\u003cp\u003eThe jacket is approximately 85 cm long, has a waist width of approximately 138 cm and sleeves approximately 54 cm long inside or 64 cm outside.\u003c\/p\u003e\n\u003ch3\u003eHow is the jacket closed?\u003c\/h3\u003e\n\u003cp\u003eWith a concealed hook-and-loop fastening.\u003c\/p\u003e\n\u003ch3\u003eWhich areas of the body does the jacket cover?\u003c\/h3\u003e\n\u003cp\u003eThe upper body, arms and neck area.\u003c\/p\u003e\n\u003ch3\u003eWhat material is the jacket made from?\u003c\/h3\u003e\n\u003cp\u003eFull-grain cowhide.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":64595105612125,"sku":"1083","price":30.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schweierjacken-11943037.jpg?v=1777921193"},{"product_id":"atemschutz-halbmaske-p3-filtern","title":"Climax half-mask respirator with two P3 filters","description":"\u003cp\u003eThe Climax half-mask respirator covers the nose and mouth and is supplied with two replaceable P3 filters. The mask is made from flexible black rubber and has an exhalation valve and two threaded connections. The cylindrical filters have a diameter of 79 mm.\u003c\/p\u003e\n\u003ch2\u003eP3 filters for particles\u003c\/h2\u003e\n\u003cp\u003eThe supplied filters are specified as P3 according to EN 14387 and are intended for particles. A suitable filter version is required for gases or vapours.\u003c\/p\u003e\n\u003ch2\u003eReplaceable filters\u003c\/h2\u003e\n\u003cp\u003eThe filters can be replaced via the threaded connections. Filter types 755\/756 are specified.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e P3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilters:\u003c\/strong\u003e 2 pieces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter diameter:\u003c\/strong\u003e 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Flexible black rubber\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Exhalation valve, 2 threaded connections\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 14387\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter model:\u003c\/strong\u003e Type 755\/756\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe respirator mask is supplied with two P3 filters.\u003c\/p\u003e\n\u003ch3\u003eDo the P3 filters protect against gases or vapours?\u003c\/h3\u003e\n\u003cp\u003eNo. P3 filters are intended for particles. A suitable gas or combination filter is required for gases or vapours.\u003c\/p\u003e\n\u003ch3\u003eCan the filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eYes. The filters can be replaced via the threaded connections.\u003c\/p\u003e\n\u003ch3\u003eWhich areas does the half-mask cover?\u003c\/h3\u003e\n\u003cp\u003eThe half-mask covers the nose and mouth area.\u003c\/p\u003e\n\u003ch3\u003eWhat is the diameter of the filters?\u003c\/h3\u003e\n\u003cp\u003eThe filters are specified with a diameter of 79 mm.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595112952157,"sku":"1140","price":18.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940339.jpg?v=1777921116"},{"product_id":"ersatzfilter-climax-a1b1e1k1-755-756","title":"Climax combination gas filter A1B1E1K1 for half masks 755 and 756","description":"\u003cp\u003eThe set contains two A1B1E1K1 combination filters for Climax half masks 755 and 756. The threaded connection is intended for this mask system. The marking combines the filter types A1, B1, E1 and K1 shown on the filter. Which version is permitted in the workplace depends on the hazardous substance, concentration, oxygen content and risk assessment.\u003c\/p\u003e\n\u003ch2\u003eCombination filters for the 755\/756 system\u003c\/h2\u003e\n\u003cp\u003eThe two filters are inserted into the threaded mounts of a compatible half mask. The mask model and filter marking must correspond before use.\u003c\/p\u003e\n\u003ch2\u003eUnderstanding the marking\u003c\/h2\u003e\n\u003cp\u003eA1B1E1K1 identifies a combination of filter types A, B, E and K. The designation does not replace selection based on the hazardous substance or consultation of the instructions for use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e A1B1E1K1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMasks:\u003c\/strong\u003e Climax 755 and 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 2 combination filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 14387:2004+A1:2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich masks do the filters fit?\u003c\/h3\u003e\n\u003cp\u003eCompatible Climax half masks 755 and 756 with the matching threaded connection.\u003c\/p\u003e\n\u003ch3\u003eWhat does A1B1E1K1 mean?\u003c\/h3\u003e\n\u003cp\u003eThe marking combines filter types A1, B1, E1 and K1 in one combination filter.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eTwo A1B1E1K1 combination filters. A half mask is not included in the filter set.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595120456029,"sku":"1092","price":13.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersoffice3desktop755-neufilter-abekjpg-11941544.jpg?v=1777921323"},{"product_id":"climax-ersatzfilter-p3-fuer-halbmasken-755-und-756","title":"Climax P3 Replacement Filters for Half Masks 755 and 756","description":"\u003cp\u003eThese two P3 replacement filters are intended for Climax half masks 755 and 756. They filter solid and liquid particles such as dust, smoke and aerosols. The cylindrical filters have a diameter of 79 mm and replace both filter positions on the half mask.\u003c\/p\u003e\n\u003ch2\u003eFor particles, not gases or vapours\u003c\/h2\u003e\n\u003cp\u003eThe P3 filter is designed for particulate hazards. It does not protect against gases or vapours; a suitable gas or combination filter is required for those hazards.\u003c\/p\u003e\n\u003ch2\u003eFit and contents\u003c\/h2\u003e\n\u003cp\u003eThe filters have a diameter of 79 mm and are intended for the filter mounts of Climax models 755 and 756. The set contains two filters for complete replacement of both filters in the half mask.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFilter type:\u003c\/strong\u003e P3 particulate filter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Climax half masks 755 and 756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter diameter:\u003c\/strong\u003e 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection area:\u003c\/strong\u003e Solid and liquid particles, dust, smoke and aerosols\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 2 filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Cylindrical black filter housing with white fabric filter discs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 143\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich half masks do the filters fit?\u003c\/h3\u003e\n\u003cp\u003eThe filters are intended for Climax half masks 755 and 756.\u003c\/p\u003e\n\u003ch3\u003eDo the filters also protect against gases or vapours?\u003c\/h3\u003e\n\u003cp\u003eNo. P3 filters are intended for particles. A suitable gas or combination filter is required for gases and vapours.\u003c\/p\u003e\n\u003ch3\u003eHow many filters are included?\u003c\/h3\u003e\n\u003cp\u003eThe set contains two filters, providing a complete set for both filter mounts on the half mask.\u003c\/p\u003e\n\u003ch3\u003eWhen must the P3 filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace them if damaged, heavily soiled or if breathing resistance increases noticeably. The manufacturer's usage limits and replacement instructions also apply. A fixed number of hours is not suitable for every dust exposure.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595120947549,"sku":"1093","price":13.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/filter-p3jpg-11941545.jpg?v=1777921334"},{"product_id":"climax-756-atemschutz-halbmaske-mit-a1-filtern","title":"Climax half-face respirator 756 with A1 filters","description":"\u003cp\u003eThe Climax 756 is supplied with two A1 gas filters. The reusable half mask made from flexible thermoplastic elastomer covers the nose and mouth. Side threaded connections allow the filters to be changed, while an exhalation valve directs exhaled air outwards.\u003c\/p\u003e\n\u003ch2\u003eConstruction and handling\u003c\/h2\u003e\n\u003cp\u003eThe continuous sealing lip sits around the nose and mouth area. The two cylindrical filters are attached through the threaded connections and can be replaced when required. The exhalation valve directs exhaled air outwards and can therefore reduce moisture inside the mask.\u003c\/p\u003e\n\u003ch2\u003eSuitable protection area\u003c\/h2\u003e\n\u003cp\u003eThe supplied A1 filters are intended for organic gases and vapours with a boiling point above 65 °C. Particle or dust protection requires different filters or suitable particulate-filtering respiratory protective equipment.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Respiratory half mask\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Thermoplastic elastomer (TPE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilters:\u003c\/strong\u003e 2 × A1, cylindrical, Ø 79 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter connection:\u003c\/strong\u003e Threaded, compatible with 755\/756\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValve:\u003c\/strong\u003e Exhalation valve\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter area:\u003c\/strong\u003e Organic gases and vapours, boiling point above 65 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHalf-mask standard:\u003c\/strong\u003e EN 140\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter standard:\u003c\/strong\u003e EN 14387:2004+A1:2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat are the supplied A1 filters intended for?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for organic gases and vapours with a boiling point above 65 °C, for example when handling certain paints or solvents. Selection must suit the substance and conditions of use.\u003c\/p\u003e\n\u003ch3\u003eCan the filters be replaced?\u003c\/h3\u003e\n\u003cp\u003eYes. The filters attach to the half mask via threaded connections and can be replaced. Replacement filters are available separately.\u003c\/p\u003e\n\u003ch3\u003eCan the half mask protect against dust?\u003c\/h3\u003e\n\u003cp\u003eThe supplied A1 filters do not provide particle protection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A1 and A2 filters?\u003c\/h3\u003e\n\u003cp\u003eBoth filter types are intended for organic gases and vapours with a boiling point above 65 °C. A2 has a higher gas absorption capacity than A1. This does not mean a higher protection factor for the half mask or a fixed service life.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the fit of the half mask?\u003c\/h3\u003e\n\u003cp\u003eAdjust the straps correctly and carry out the fit check according to the instructions before every use. The mask edge must remain continuously in contact with the skin; facial hair in the sealing line must not interfere with the seal.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":64595132744029,"sku":"1253","price":18.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11821670.jpg?v=1777036430"},{"product_id":"visier-portwest-augenbrauenschutz-mit-transparentem","title":"Portwest face shield PW91 with clear visor","description":"\u003cp\u003eThe Portwest PW91 combines an adjustable browguard with a clear polycarbonate visor. The visor is 1 mm thick and provides clear vision during work involving flying particles.\u003c\/p\u003e\n\u003ch2\u003eClear visor with ratchet adjustment\u003c\/h2\u003e\n\u003cp\u003eThe polycarbonate screen sits in a robust polypropylene browguard. A ratchet makes it easier to adjust the head circumference; the soft sweatband supports wearing comfort.\u003c\/p\u003e\n\u003ch2\u003eKeep the field of vision clear\u003c\/h2\u003e\n\u003cp\u003eThe visor can be removed for cleaning and inspection. The screen should be replaced if deeply scratched or after a heavy impact; Portwest supplies the PW92 as a replacement visor.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Portwest\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PW91\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVisor:\u003c\/strong\u003e Clear polycarbonate, 1 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Ratchet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 166 1B\/3B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the PW91 fit over glasses?\u003c\/h3\u003e\n\u003cp\u003eThe design is a face shield with browguard. Whether prescription glasses fit underneath depends on their size and shape; check the fit before use.\u003c\/p\u003e\n\u003ch3\u003eIs a replacement visor available?\u003c\/h3\u003e\n\u003cp\u003eYes. The clear PW92 replacement visor is intended for the PW91. It should be replaced if scratches affect the field of vision.\u003c\/p\u003e","brand":"Portwest","offers":[{"title":"Default Title","offer_id":65072847323485,"sku":"B5865","price":12.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/pw91clrjpg-11969831.jpg?v=1782386854"},{"product_id":"vollsichtbrille-portwest-ultra-safe-mit-kinnschutz","title":"Portwest full-vision safety goggles PS22 Ultra Safe with chin guard","description":"\u003cp\u003eThe Portwest PS22 Ultra Safe are full-vision goggles with a fold-up chin guard. They cover the eye area and are designed for liquid droplets, large dust particles, molten metal and hot solids.\u003c\/p\u003e\n\u003ch2\u003eChin guard and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe chin guard folds upwards when not in use. A slider allows ventilation at the chin guard; the goggles themselves use indirect ventilation to help reduce fogging.\u003c\/p\u003e\n\u003ch2\u003eCoated polycarbonate lens\u003c\/h2\u003e\n\u003cp\u003eThe lens has a K coating against scratching and an N coating against fogging. The design is intended to be worn over most prescription glasses.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Portwest\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PS22 Ultra Safe\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 166 1 BT 3 4 9 KN; EN 170 2C-1.2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Indirect, adjustable at the chin guard\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polycarbonate, PVC, ABS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e 100% metal-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the chin guard be folded up?\u003c\/h3\u003e\n\u003cp\u003eYes. The chin guard can be folded into a standby position when the task does not require additional coverage.\u003c\/p\u003e\n\u003ch3\u003eCan the goggles be worn over prescription glasses?\u003c\/h3\u003e\n\u003cp\u003ePortwest specifies the design for wearing over most prescription glasses. Check the fit and field of vision before starting work.\u003c\/p\u003e","brand":"Portwest","offers":[{"title":"Default Title","offer_id":65072847520093,"sku":"B6040","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ps22clrjpg-11969838.jpg?v=1782386879"},{"product_id":"schutzbrille-wechselscheibe","title":"ART.MAS full-vision safety goggles B403 with interchangeable lens","description":"\u003cp\u003eThe ART.MAS B403 surrounds the eyes with a flexible frame and clear polycarbonate lens. Four indirect ventilation valves support air exchange. The lens is replaceable, allowing a suitable replacement part to be fitted if it is damaged.\u003c\/p\u003e\n\u003ch2\u003eIndirect ventilation and flexible frame\u003c\/h2\u003e\n\u003cp\u003eTwo valves at the top and two at the bottom of the frame allow air exchange. The cadmium-free PVC frame sits around the eye area, while the elastic headband holds the goggles in place.\u003c\/p\u003e\n\u003ch2\u003eOptical class 1 lens\u003c\/h2\u003e\n\u003cp\u003eThe B403 complies with EN 166:2001 and has an optical class 1 lens. The design is intended for mechanical eye protection and protection against liquid droplets. For the specific task, the markings and instructions for use must match the risk.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e B403\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 166:2001\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLens:\u003c\/strong\u003e Polycarbonate, optical class 1, replaceable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Four indirect valves\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrame:\u003c\/strong\u003e Cadmium-free PVC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Elastic headband\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I replace a scratched lens?\u003c\/h3\u003e\n\u003cp\u003eYes. The B403 has a replaceable lens. Use a suitable replacement part for this model and check that it is fitted correctly before use.\u003c\/p\u003e\n\u003ch3\u003eDoes the ventilation prevent all fogging?\u003c\/h3\u003e\n\u003cp\u003eThe indirect valves support air exchange. The lens may still fog in cases of major temperature differences or high humidity.\u003c\/p\u003e","brand":"ART.MAS","offers":[{"title":"Default Title","offer_id":65072847716701,"sku":"B7908","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/5902869784518jpg-11970160.jpg?v=1782399514"},{"product_id":"schutzhelm-hoegert-diemel-fuer-grosse-hoehen","title":"Högert Diemel industrial safety helmet with chin strap","description":"\u003cp\u003eThe Högert Diemel industrial safety helmet has an ABS shell, 6-point webbing and a chin strap. The width is adjusted using a twist knob. A short peak, ventilation openings and holders for accessories complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eFit and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe 6-point webbing supports the helmet’s fit. The size is adjusted using the twist knob. A chin strap complements the retention system.\u003c\/p\u003e\n\u003ch2\u003eShell and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe helmet shell is made of ABS. Ventilation openings support air circulation; the short peak leaves the field of vision largely unobstructed.\u003c\/p\u003e\n\u003ch2\u003eAccessory holders\u003c\/h2\u003e\n\u003cp\u003eThe holders provided are intended for a visor, safety glasses, ear defenders and a headlamp.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Diemel HT5K197\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 397:2012 + A1:2012\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShell:\u003c\/strong\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetention system:\u003c\/strong\u003e 6-point webbing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChin strap:\u003c\/strong\u003e Present\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Short\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Openings in the upper helmet area\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessory holder:\u003c\/strong\u003e For visor, safety glasses, ear defenders and headlamp\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour selection:\u003c\/strong\u003e White, neon yellow or orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional marking:\u003c\/strong\u003e MM: molten metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich standard is specified for the helmet?\u003c\/h3\u003e\n\u003cp\u003eEN 397:2012 + A1:2012 is specified for the Diemel HT5K197.\u003c\/p\u003e\n\u003ch3\u003eHow is the size adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe size is adjusted using a twist knob.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories can be attached?\u003c\/h3\u003e\n\u003cp\u003eThe holders are intended for a visor, safety glasses, ear defenders and a headlamp.\u003c\/p\u003e\n\u003ch3\u003eIs the helmet fall protection?\u003c\/h3\u003e\n\u003cp\u003eNo. A safety helmet does not replace measures and equipment for work involving a risk of falling.\u003c\/p\u003e\n\u003ch3\u003eWhich colours is the helmet available in?\u003c\/h3\u003e\n\u003cp\u003eWhite, neon yellow and orange are specified.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"White","offer_id":65072894607709,"sku":"9236-w","price":23.49,"currency_code":"EUR","in_stock":false},{"title":"Neon Yellow","offer_id":65072848240989,"sku":"9236-g","price":20.99,"currency_code":"EUR","in_stock":false},{"title":"Arancio","offer_id":65072894574941,"sku":"9236-o","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k197jpg-11970163.jpg?v=1782399553"},{"product_id":"ersatzfilter-731-725-climax","title":"Respirator filters for Climax 731\/725, A2, P3 R and combination filters","description":"\u003cp\u003eThese replacement filters are intended for Climax 731 and 725 respirators. Depending on the version, A2, P3 R, A2B2E2K2 and A2B2E2K2P3 are available. Connection is via an Rd 40 × 1\/7 inch round thread; the filter diameter is 105 mm.\u003c\/p\u003e\n\u003ch2\u003eFilter versions\u003c\/h2\u003e\n\u003cp\u003eA2 is intended for organic gases and vapours with a boiling point above 65 °C. P3 R denotes a reusable particulate filter type. A2B2E2K2 combines the gas and vapour classes stated in the designation; A2B2E2K2P3 adds P3 to this combination.\u003c\/p\u003e\n\u003ch2\u003eConnection and selection\u003c\/h2\u003e\n\u003cp\u003eThe filters have an Rd 40 × 1\/7 inch round thread according to DIN EN 148-1 and a diameter of 105 mm. Before fitting, the mask, filter type and specific hazardous substances must be professionally matched.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Climax 731 and 725\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter versions:\u003c\/strong\u003e A2, P3 R, A2B2E2K2 and A2B2E2K2P3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 14387 and EN 143\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Rd 40 × 1\/7 inch according to DIN EN 148-1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 105 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter types:\u003c\/strong\u003e A organic gases and vapours, B inorganic gases, E acid gases, K ammonia, P3 solid and liquid particles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eP3 R:\u003c\/strong\u003e Reusable particulate filter type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich filter version is intended for organic vapours?\u003c\/h3\u003e\n\u003cp\u003eVersion A2 is intended for organic gases and vapours with a boiling point above 65 °C. Actual suitability also depends on the hazardous substance and operating situation.\u003c\/p\u003e\n\u003ch3\u003eWhat does A2B2E2K2P3 mean?\u003c\/h3\u003e\n\u003cp\u003eThe designation combines filter types A, B, E and K with particulate filter type P3. The specific selection must match the mask, hazardous substance and risk assessment.\u003c\/p\u003e\n\u003ch3\u003eWhat connection do the filters require?\u003c\/h3\u003e\n\u003cp\u003eAn Rd 40 × 1\/7 inch round thread according to DIN EN 148-1 is specified. The Climax 731 and 725 masks are specifically named.\u003c\/p\u003e\n\u003ch3\u003eWhat does P3 R mean?\u003c\/h3\u003e\n\u003cp\u003eP3 denotes the particulate filter type for solid and liquid particles. The R identifies a reusable version.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"a2b2e2k2","offer_id":65815527752029,"sku":"1763-ABEK","price":20.49,"currency_code":"EUR","in_stock":false},{"title":"a2b2e2k2p3","offer_id":65815527784797,"sku":"1763-ABEKP","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"a2","offer_id":65072852730205,"sku":"1763-A2","price":13.49,"currency_code":"EUR","in_stock":true},{"title":"p3 r","offer_id":65815527588189,"sku":"1763-P3","price":13.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/atemschutz-vollmaske-filterjpg-11968293.jpg?v=1782380071"},{"product_id":"ersatzfilter-climax-2x-757","title":"Climax replacement respirator filters 757 in five versions, 2 pieces","description":"\u003cp\u003eThe set contains two replacement filters for Climax 757. The version can be selected; different filter types are specified depending on the variant. Before use, the filter class, model and connection must be checked against the existing mask and filter label.\u003c\/p\u003e\n\u003ch2\u003eSelect the suitable version\u003c\/h2\u003e\n\u003cp\u003eVarious filter versions are listed. The decisive factor is that the marking on the filter and mask matches.\u003c\/p\u003e\n\u003ch2\u003eCheck dimensions and connection\u003c\/h2\u003e\n\u003cp\u003eThe shop item is specified with a diameter of 90 mm, a thread diameter of 39 mm and a thread height of 15 mm. The specific connection type of the selected version must be checked before use.\u003c\/p\u003e\n\u003ch2\u003eUnderstanding filter markings\u003c\/h2\u003e\n\u003cp\u003eThe colour codes and types describe the intended areas of use. Selection must be based on the specific hazardous substance, concentration and manufacturer information.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 757\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 2 replacement filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilter versions:\u003c\/strong\u003e A1, P3, K1, A1B1E1K1 and A1B1E1K1P3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 90 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread diameter:\u003c\/strong\u003e 39 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread height:\u003c\/strong\u003e 15 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 14387:2004+A1:2008 and EN 143:2006+A1:2006 for the P3 version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many filters are included?\u003c\/h3\u003e\n\u003cp\u003eThe set contains two replacement filters of the selected version.\u003c\/p\u003e\n\u003ch3\u003eWhich filter versions are specified?\u003c\/h3\u003e\n\u003cp\u003eThe specified versions are A1, P3, K1, A1B1E1K1 and A1B1E1K1P3.\u003c\/p\u003e\n\u003ch3\u003eWhich version fits my mask?\u003c\/h3\u003e\n\u003cp\u003eOnly the filter version whose model and connection markings match the mask is suitable.\u003c\/p\u003e\n\u003ch3\u003eDoes every version have the same connection?\u003c\/h3\u003e\n\u003cp\u003eThe connection and filter label must be checked against the relevant version before use.\u003c\/p\u003e\n\u003ch3\u003eWhat does P3 mean?\u003c\/h3\u003e\n\u003cp\u003eP3 denotes a particle-filter version. The specific use depends on the hazardous substance, concentration and manufacturer information.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"p3","offer_id":65815487381853,"sku":"1573-P3","price":13.99,"currency_code":"EUR","in_stock":true},{"title":"a1b1e1k1","offer_id":65815487414621,"sku":"1573-ABEK","price":13.99,"currency_code":"EUR","in_stock":true},{"title":"a1b1e1k1p3","offer_id":65815487447389,"sku":"1573-ABEKP","price":20.99,"currency_code":"EUR","in_stock":true},{"title":"K1","offer_id":65815249289565,"sku":"1573-K1","price":14.49,"currency_code":"EUR","in_stock":true},{"title":"a1","offer_id":65072855187805,"sku":"1573-A1","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/filterjpg-11968356.jpg?v=1782380167"},{"product_id":"cofra-schweisserjacke-anir-denim-baumwolle-410-g-m2","title":"Cofra welder's jacket ANIR denim cotton 410 g\/m²","description":"\u003cp\u003eThe Cofra ANIR welding jacket is made from 100% denim cotton with a fabric weight of 410 g\/m² and a flame-resistant treatment. A snap fastening, hook-and-loop sleeve cuffs and four closable pockets support practical use. Back ventilation promotes air circulation during physically demanding work.\u003c\/p\u003e\n\u003ch2\u003eFeatures for welding work\u003c\/h2\u003e\n\u003cp\u003eThe jacket has a quick-opening snap fastening and sleeve cuffs with hook-and-loop fastening. Two front pockets and two chest pockets provide storage; they have flaps and hook-and-loop fastenings.\u003c\/p\u003e\n\u003ch2\u003eDenim with back ventilation\u003c\/h2\u003e\n\u003cp\u003eThe heavy denim fabric forms a work layer with flame-resistant treatment. Ventilation openings at the back support air circulation. For complete body protection, select the jacket and other protective clothing to suit the relevant work process.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Cofra\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ANIR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter material:\u003c\/strong\u003e 100% denim cotton, flame-resistant treated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 410 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN ISO 11611; EN ISO 11612; EN ISO 13688\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Snap fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSleeves:\u003c\/strong\u003e Cuffs with hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePockets:\u003c\/strong\u003e 4 pockets with flaps and hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Back ventilation system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMetal detectors:\u003c\/strong\u003e Not detectable by metal detectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Wash at 30 °C, do not bleach; follow the care label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich trousers complement the ANIR jacket?\u003c\/h3\u003e\n\u003cp\u003eThe Cofra ANES is the matching welding trouser from the denim series. When combining the jacket and trousers, ensure they overlap sufficiently when standing and bending. The remaining protective equipment depends on the welding process.\u003c\/p\u003e\n\u003ch3\u003eWhich standards are specified for the jacket?\u003c\/h3\u003e\n\u003cp\u003eEN ISO 11611 concerns protective clothing for welding and allied processes, EN ISO 11612 protection against heat and flame, and EN ISO 13688 general requirements. The performance levels on the garment and the working conditions are also decisive for selection.\u003c\/p\u003e\n\u003ch3\u003eWhat is the snap fastening for?\u003c\/h3\u003e\n\u003cp\u003eThe snap fastening allows the jacket to be opened quickly.\u003c\/p\u003e\n\u003ch3\u003eWhat is the jacket made from?\u003c\/h3\u003e\n\u003cp\u003eThe outer material is 100% denim cotton with a fabric weight of 410 g\/m² and a flame-resistant treatment.\u003c\/p\u003e","brand":"Cofra","offers":[{"title":"54","offer_id":65815391994205,"sku":"3121-54","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"56","offer_id":65815392026973,"sku":"3121-56","price":57.49,"currency_code":"EUR","in_stock":false},{"title":"62","offer_id":65815392387421,"sku":"3121-62","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"64","offer_id":65815392420189,"sku":"3121-64","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"52","offer_id":65815391961437,"sku":"3121-52","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"58","offer_id":65815392059741,"sku":"3121-58","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"60","offer_id":65815392092509,"sku":"3121-60","price":57.49,"currency_code":"EUR","in_stock":false},{"title":"44","offer_id":65072856695133,"sku":"3121-44","price":57.49,"currency_code":"EUR","in_stock":false},{"title":"46","offer_id":65815391633757,"sku":"3121-46","price":57.49,"currency_code":"EUR","in_stock":false},{"title":"48","offer_id":65815391666525,"sku":"3121-48","price":57.49,"currency_code":"EUR","in_stock":true},{"title":"50","offer_id":65815391699293,"sku":"3121-50","price":57.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schweierjackejpg-11968531.jpg?v=1782380413"},{"product_id":"cofra-einlege-kniepolster-aus-pe-schaum-l-xl","title":"Cofra PE foam knee pad inserts, L\/XL","description":"\u003cp\u003eCofra knee pads made from foamed polyethylene cushion pressure during kneeling and can be aligned with the shape of the knee. They are intended for work trousers with suitable knee-pad pockets. Size L is offered for clothing sizes 44–54 and XL for 56–64.\u003c\/p\u003e\n\u003ch2\u003eCushioning when kneeling\u003c\/h2\u003e\n\u003cp\u003eThe PE foam distributes pressure across the support area and cushions loads when working in a kneeling position. Adjustable positioning helps achieve a suitable fit inside a compatible knee-pad pocket.\u003c\/p\u003e\n\u003ch2\u003eKnee protection in a compatible trouser system\u003c\/h2\u003e\n\u003cp\u003eThe pads comply with EN 14404 and are intended for insertion into suitable knee-pad pockets. They cushion impact loads and resist penetration by sharp objects. For compliant protective performance, the combination of trousers and pads must be suitable.\u003c\/p\u003e\n\u003ch2\u003eChoosing the size\u003c\/h2\u003e\n\u003cp\u003eSize L corresponds to clothing sizes 44 to 54, while XL corresponds to sizes 56 to 64. Before buying, check that the pockets in the work trousers can accommodate the shape and dimensions of the pads.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cofra\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Foamed polyethylene (PE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 14404\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective functions:\u003c\/strong\u003e Cushioning and resistance to penetration by sharp objects\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePositioning:\u003c\/strong\u003e Adjustable to the shape of the knee\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize L:\u003c\/strong\u003e Clothing sizes 44–54\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize XL:\u003c\/strong\u003e Clothing sizes 56–64\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMetal detection:\u003c\/strong\u003e Not detectable by metal detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill these knee pads fit every pair of work trousers?\u003c\/h3\u003e\n\u003cp\u003eNo. They require suitable knee-pad pockets. Check the shape and dimensions of the pockets before buying.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eSize L is specified for clothing sizes 44 to 54, and XL for sizes 56 to 64.\u003c\/p\u003e\n\u003ch3\u003eDo the pads also protect against sharp objects?\u003c\/h3\u003e\n\u003cp\u003eIn a suitable trouser system, the pads resist penetration by sharp objects in accordance with EN 14404. This is not an unrestricted guarantee against any nail, shard or ground surface.\u003c\/p\u003e\n\u003ch3\u003eAre the knee pads washable?\u003c\/h3\u003e\n\u003cp\u003eWipe with a damp cloth when necessary. Remove the pads before machine-washing the work trousers; do not machine-wash the pads themselves.\u003c\/p\u003e\n\u003ch3\u003eWhen should the knee pads be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace them if they develop cracks, permanent deformation or reduced cushioning. Condition and use are decisive; a fixed service life of 12–18 months does not apply regardless of use.\u003c\/p\u003e","brand":"Cofra","offers":[{"title":"L (44-54)","offer_id":65072857317725,"sku":"3311-l","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"XL (56-64)","offer_id":65815362699613,"sku":"3311-xl","price":8.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cofra-knieschonerjpg-11968892.jpg?v=1782380703"},{"product_id":"climax-bauhelm-mit-6-punkt-aufhaengung-en-397-und-en-50365","title":"Climax safety helmet with 6-point suspension, EN 397 and EN 50365","description":"\u003cp\u003eThe Climax safety helmet provides industrial protection according to EN 397 and electrical insulation according to EN 50365. The polyethylene shell is supported by a 6-point suspension. The moisture-absorbing sweatband and headband extending well into the nape support the fit. 30 mm accessory slots are provided for compatible headband ear defenders or visor holders.\u003c\/p\u003e\n\u003ch2\u003eProtection and equipment\u003c\/h2\u003e\n\u003cp\u003eEN 397 covers mechanical industrial protection, including protection against impact and penetration. Electrical class 0 under EN 50365 is intended for systems up to 1,000 V AC or 1,500 V DC. The helmet is only one part of the required protective equipment. The separate 440 V AC marking under EN 397 must not be confused with this; it is not authorisation for live working.\u003c\/p\u003e\n\u003ch2\u003eAccessories and variants\u003c\/h2\u003e\n\u003cp\u003eSuitable accessories such as behind-the-head ear defenders or a visor holder can be attached through the 30 mm slots. The helmet is available in seven colours; colour selection may support workplace identification but does not replace individual workplace procedures.\u003c\/p\u003e\n\u003ch2\u003eFit and pre-use inspection\u003c\/h2\u003e\n\u003cp\u003eThe headband adjusts from 53 to 61 cm. The helmet weighs approximately 340 g and is designed for temperatures down to −10 °C. Before use, inspect the shell, internal equipment and fastenings. Replace the helmet after a significant impact, even if no external cracks are visible.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0: up to 1,000 V AC \/ 1,500 V DC; 440 V AC is a separate EN 397 marking\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e Polyethylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInternal equipment:\u003c\/strong\u003e 6-point plastic suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 340 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCold resistance:\u003c\/strong\u003e Down to −10 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessory interface:\u003c\/strong\u003e 30 mm slots\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Sweatband, headband extending well into the nape and rain gutter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e 7 variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat head circumference is the helmet suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe headband adjusts for a head circumference of 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhat do EN 397 and EN 50365 mean for this safety helmet?\u003c\/h3\u003e\n\u003cp\u003eEN 397 describes an industrial safety helmet for mechanical hazards. EN 50365 concerns electrical insulation; class 0 applies to systems up to 1,000 V AC or 1,500 V DC. The helmet alone does not make work on live parts safe. The required working method and additional protective equipment are also necessary.\u003c\/p\u003e\n\u003ch3\u003eCan accessories be attached to the helmet?\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm slots are intended for suitable helmet-mounted ear defenders and visor holders.\u003c\/p\u003e\n\u003ch3\u003eDown to what temperature is the shell cold-resistant?\u003c\/h3\u003e\n\u003cp\u003eThe shell is designed for temperatures down to −10 °C. This is not a general guarantee against breakage. Use only suitable winter equipment that does not impair the fit.\u003c\/p\u003e\n\u003ch3\u003eWhen must the safety helmet be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace it immediately after a significant impact or if there are cracks or damaged internal equipment. Also follow the periods stated in the supplied manufacturer’s instructions; use, UV exposure, chemicals and storage affect service life. The manufacturing date on the helmet helps with checks.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"blue","offer_id":65072857547101,"sku":"121","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":65815617405277,"sku":"493","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65812133970269,"sku":"122","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"yellow","offer_id":65815617339741,"sku":"492","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65815617372509,"sku":"494","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"grey","offer_id":65815426597213,"sku":"2945","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"arancio","offer_id":65812267598173,"sku":"3477-o","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/bauhelm-gelbjpg-11968897.jpg?v=1782380738"},{"product_id":"cofra-gronked-verstellbares-halteseil-mit-seilbremse-210-m","title":"Cofra adjustable work-positioning lanyard Gronked with rope brake, 2–10 m","description":"\u003cp\u003eThe Cofra Gronked is an adjustable lanyard for restraint and work positioning. The sliding aluminium adjuster sets the effective rope length and locks under load. Five lengths from 2 to 10 m are available, each with a 12 mm polyester kernmantle rope.\u003c\/p\u003e\n\u003ch2\u003eRope brake and length adjuster\u003c\/h2\u003e\n\u003cp\u003eThe aluminium length adjuster has a sliding ergonomic handle and can be positioned on the rope. Under load, the rope brake locks automatically and prevents further slipping.\u003c\/p\u003e\n\u003ch2\u003eAluminium connectors\u003c\/h2\u003e\n\u003cp\u003eThe base connector has a 20 mm opening and an automatic Twist-Lock safety mechanism requiring two opening movements. The end connector opens to 22 mm and has a rear locking lever. Both connectors have a Key-Lock closure and a minimum strength of 25 kN in accordance with EN 362.\u003c\/p\u003e\n\u003ch2\u003eRope, lengths and use\u003c\/h2\u003e\n\u003cp\u003eEach length variant can be adjusted from 0.6 m up to its own maximum length. The 2 m version weighs 740 g, the 3 m version 850 g, the 4 m version 950 g, the 5 m version 1,050 g and the 10 m version 1,570 g. Choose the version according to the intended restraint or positioning system.\u003c\/p\u003e\n\u003ch2\u003eWork positioning lanyard for a compatible restraint system\u003c\/h2\u003e\n\u003cp\u003eThe Gronked is intended for restraint or work positioning under EN 358:2018. It does not arrest a free fall. Where there is a fall hazard, an additional suitable fall-arrest system is required. The harness, anchor point and lanyard must be compatible according to their respective instructions for use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cofra\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProduct range:\u003c\/strong\u003e Keepset\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 358:2018; EN 362\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRope:\u003c\/strong\u003e 12 mm polyester kernmantle rope\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment range:\u003c\/strong\u003e 0.6 m up to the respective maximum length for each variant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength adjuster:\u003c\/strong\u003e Aluminium, ergonomic and sliding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocking:\u003c\/strong\u003e Automatic under tension or load\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAreas of use:\u003c\/strong\u003e Work positioning, work at height, scaffolding, roofing and façade work\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpecified load:\u003c\/strong\u003e Maximum total weight of the user including equipment: 150 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvailable lengths and weights:\u003c\/strong\u003e 2 m: 740 g; 3 m: 850 g; 4 m: 950 g; 5 m: 1,050 g; 10 m: 1,570 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase connector:\u003c\/strong\u003e Aluminium, minimum strength 25 kN, Key-Lock, Twist-Lock with two opening movements; opening 20 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnd connector:\u003c\/strong\u003e Aluminium, minimum strength 25 kN, Key-Lock and rear locking lever; opening 22 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use the Gronked to arrest a fall?\u003c\/h3\u003e\n\u003cp\u003eNo. The Gronked is intended for restraint and work positioning. It does not contain an energy absorber for arresting a free fall. Where a fall is possible, a suitable additional fall-arrest system must be provided.\u003c\/p\u003e\n\u003ch3\u003eCan every variant be extended to 10 m?\u003c\/h3\u003e\n\u003cp\u003eNo. Each variant ranges from 0.6 m to the ordered length. For example, the 3 m version can be adjusted up to 3 m; the 10 m version is required for lengths up to 10 m.\u003c\/p\u003e\n\u003ch3\u003eDoes the 150 kg limit refer only to body weight?\u003c\/h3\u003e\n\u003cp\u003eThe 150 kg refers to the total weight including clothing, tools and equipment being worn or carried. Also observe the load limits of the other system components.\u003c\/p\u003e\n\u003ch3\u003eWill the connectors fit every harness?\u003c\/h3\u003e\n\u003cp\u003eThe base connector opens to 20 mm and the end connector to 22 mm. In addition to the opening width, the connection type, intended restraint attachment points and load direction must be suitable. EN 361 marking on the harness alone does not confirm this combination.\u003c\/p\u003e\n\u003ch3\u003eHow much do the individual lengths weigh?\u003c\/h3\u003e\n\u003cp\u003eThe 2 m version weighs 740 g, the 3 m version 850 g, the 4 m version 950 g, the 5 m version 1,050 g and the 10 m version 1,570 g. This allows the required reach to be weighed against the additional weight.\u003c\/p\u003e\n\u003ch3\u003eWhat does Key-Lock mean on the connectors?\u003c\/h3\u003e\n\u003cp\u003eKey-Lock refers to an interlocking closure shape without a protruding hook nose. It makes clipping in and out easier. The base connector is locked by the Twist-Lock, while the end connector is locked by the locking lever.\u003c\/p\u003e","brand":"Cofra","offers":[{"title":"3 m","offer_id":65815365484893,"sku":"3911-3","price":73.49,"currency_code":"EUR","in_stock":true},{"title":"4 m","offer_id":65815365517661,"sku":"3911-4","price":76.99,"currency_code":"EUR","in_stock":true},{"title":"5 m","offer_id":65815365550429,"sku":"3911-5","price":80.99,"currency_code":"EUR","in_stock":true},{"title":"2 m","offer_id":65815365419357,"sku":"3911-2","price":71.49,"currency_code":"EUR","in_stock":true},{"title":"10 m","offer_id":65072857809245,"sku":"3911-10","price":100.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/gronked1jpg-11968913.jpg?v=1782380856"},{"product_id":"schweisserschuerze-aus-rindspaltleder-mit-kevlar-naehten","title":"Welding apron in cow split leather with Kevlar stitching","description":"\u003cp\u003eThis leather apron for welding work covers the front of the torso and thighs. Its cow split leather is approximately 1.2 mm thick and features heat-resistant Kevlar stitching. An adjustable metal buckle provides adjustment.\u003c\/p\u003e\n\u003ch2\u003eMaterial and protection area\u003c\/h2\u003e\n\u003cp\u003eThe apron is made from approx. 1.2 mm cow split leather and covers the torso and thighs. The stitching is made from heat-resistant Kevlar.\u003c\/p\u003e\n\u003ch2\u003eSizes\u003c\/h2\u003e\n\u003cp\u003eAvailable sizes are 60 × 90 cm, 70 × 100 cm and 80 × 110 cm. Choose according to body height, working position and the coverage required.\u003c\/p\u003e\n\u003ch2\u003eFastening, use and care\u003c\/h2\u003e\n\u003cp\u003ePut the apron on and adjust it with the metal buckle. Selection for welding work depends on the process and complete product marking. Follow the care information on the label and carefully wipe off light soiling with a damp cloth.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cow split leather\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLeather thickness:\u003c\/strong\u003e approx. 1.2 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStitching:\u003c\/strong\u003e Heat-resistant Kevlar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Adjustable metal buckle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection area:\u003c\/strong\u003e Torso and thighs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e 60 × 90 cm, 70 × 100 cm, 80 × 110 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 11611, EN 13688\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Follow the label’s care information; wipe with a damp cloth if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich of the three apron sizes is right for my work?\u003c\/h3\u003e\n\u003cp\u003eThe available sizes are 60 × 90, 70 × 100 and 80 × 110 cm. Compare the measurements with the coverage required for the torso and thighs. Consider your typical working position; the apron must not restrict walking or bending.\u003c\/p\u003e\n\u003ch3\u003eIs the apron sufficient as standalone welding clothing?\u003c\/h3\u003e\n\u003cp\u003eNo. It covers only part of the body. Depending on the task, the arms, back, legs and feet require additional suitable protective clothing and equipment.\u003c\/p\u003e\n\u003ch3\u003eIs the apron automatically suitable for every welding process?\u003c\/h3\u003e\n\u003cp\u003eSelection depends on the complete protection class, process and workplace exposure. The EN 11611 specification alone is not a blanket approval for all welding or foundry work.\u003c\/p\u003e\n\u003ch3\u003eHow should I check the leather apron before use?\u003c\/h3\u003e\n\u003cp\u003eCheck the leather, Kevlar stitching and metal buckle for tears, open areas and secure operation. Adjust the apron so the required areas remain covered in the working position.\u003c\/p\u003e\n\u003ch3\u003eCan I machine-wash the leather apron?\u003c\/h3\u003e\n\u003cp\u003eFollow the care information on the product. Do not machine-wash it without corresponding approval. Light soiling can be carefully removed with a damp cloth.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"70x100","offer_id":65815367942493,"sku":"3984-70x100","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"80x110","offer_id":65815367975261,"sku":"3984-80x110","price":18.99,"currency_code":"EUR","in_stock":true},{"title":"60x90","offer_id":65072857940317,"sku":"3984-60x90","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schweierschrzejpg-11968923.jpg?v=1782381058"},{"product_id":"bradas-kniekissen-40-20-2-cm-orange-oder-gruen","title":"Kneeling Pad 40 × 20 × 2 cm, orange or green – Bradas","description":"\u003cp\u003eThe Bradas kneeling pad provides a cushioned surface for gardening and other activities carried out on your knees. The 2 cm-thick closed-cell foam is water-repellent and reduces direct contact with cold or damp ground. The pad measures 40 × 20 cm and is available in orange or green.\u003c\/p\u003e\n\u003ch2\u003eCushioning for hard surfaces\u003c\/h2\u003e\n\u003cp\u003eThe 40 × 20 × 2 cm closed-cell foam pad cushions your knees or seat on hard surfaces. It can also be used as a compact mat for tools.\u003c\/p\u003e\n\u003ch2\u003eColours and care\u003c\/h2\u003e\n\u003cp\u003eThe kneeling pad is available in orange or green. Its water-repellent surface can be wiped clean with water and a cloth.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Bradas\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 40 × 20 × 2 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePadding:\u003c\/strong\u003e Closed-cell foam, 2 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSurface:\u003c\/strong\u003e Water-repellent and easy to clean\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Orange or green\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e Kneeling and seat pad; cushioning against hard surfaces\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Building sites, garden, workshop, tiling and installation work\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Wipe with water and a cloth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use the kneeling pad on gravel?\u003c\/h3\u003e\n\u003cp\u003eRemove sharp stones and other pointed objects before placing it down. The foam pad has no guaranteed puncture resistance.\u003c\/p\u003e\n\u003ch3\u003eIs it also suitable as a seat pad?\u003c\/h3\u003e\n\u003cp\u003eYes. The base measures 40 × 20 cm. Before sitting down, check that it provides enough space for the intended position and is resting securely.\u003c\/p\u003e\n\u003ch3\u003eCan I kneel on hot surfaces with it?\u003c\/h3\u003e\n\u003cp\u003eNo permitted operating temperature is specified for hot surfaces. Do not use the kneeling pad as heat protection.\u003c\/p\u003e\n\u003ch3\u003eHow do I remove soil from the pad?\u003c\/h3\u003e\n\u003cp\u003eWipe the water-repellent surface with water and a cloth. Carefully remove coarse, sharp-edged dirt and allow the pad to dry before storing it.\u003c\/p\u003e","brand":"Bradas","offers":[{"title":"Orange","offer_id":65815333699933,"sku":"4562-o","price":2.49,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":65072858333533,"sku":"4562-g","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/kniekissen-orange-11968955.jpg?v=1782381363"},{"product_id":"bauhelm-drehverschluss","title":"Climax construction and industrial safety helmet with rotary adjustment","description":"\u003cp\u003eThe Climax safety helmet has a polyethylene shell, a 6-point plastic suspension and a rotary adjustment for head sizes from 53 to 61 cm. A sweatband, rain gutter and 30 mm accessory slots complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eFit and equipment\u003c\/h2\u003e\n\u003cp\u003eThe head size can be adjusted from 53 to 61 cm using the rotary adjustment. The headband extends to the nape; a sweatband, rain gutter and 30 mm accessory slots for compatible accessories are included.\u003c\/p\u003e\n\u003ch2\u003eStandards and use\u003c\/h2\u003e\n\u003cp\u003eEN 397 and EN 50365 are specified as standards. Use the helmet according to its marking, instructions for use and the specific work requirements. Accessories must be suitable for this helmet design.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (PE) shell; 6-point plastic suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 330 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e Cold-resistant down to −10 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Rotary adjustment, continuously adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Headband extending to the nape, sweatband, rain gutter and 30 mm accessory slots\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e White, yellow, red, blue, green, grey and orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the head size?\u003c\/h3\u003e\n\u003cp\u003ePut on the helmet and adjust the rotary fastening at the back of the head so that the headband is stable and comfortable. The adjustment range is 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit in the slots?\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm slots are intended for compatible helmet accessories such as earmuffs and visor mounts. Use only accessories suitable for this specific helmet design.\u003c\/p\u003e\n\u003ch3\u003eCan the helmet be used after an impact?\u003c\/h3\u003e\n\u003cp\u003eAfter a strong impact, the helmet should be taken out of use, even if there is no visible damage. Check the shell and suspension regularly.\u003c\/p\u003e\n\u003ch3\u003eIs the helmet suitable for cold temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe stated cold resistance extends down to −10 °C.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"yellow","offer_id":65815317086557,"sku":"4733-ge","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":65815317119325,"sku":"4733-g","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"grey","offer_id":65815317152093,"sku":"4733-gr","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65815317184861,"sku":"4733-r","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65815317217629,"sku":"4733-w","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"arancio","offer_id":65072908697949,"sku":"4733-o","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"blue","offer_id":65072859513181,"sku":"4733-b","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blaujpg-11969091.jpg?v=1782381543"},{"product_id":"cofra-ergotek-fast-auffanggurt-mit-schnellverschluessen-en-361","title":"Cofra fall-arrest harness ERGOTEK FAST with quick-release buckles, EN 361","description":"\u003cp\u003eThe Cofra ERGOTEK FAST is a fall arrest harness to EN 361:2002 with a galvanised-steel dorsal D-ring and a sternal attachment made from two A\/2 loops that must be used together. The upper straps are made from stretchable ELASTYX material. Adjustable shoulder and seat straps allow a tailored fit. Two coated-steel quick-release buckles make the harness easier to put on and remove. The harness is designed for up to 150 kg, including equipment and tools.\u003c\/p\u003e\n\u003ch2\u003eAttachment points and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe dorsal D-ring is positioned on the back. The sternal attachment at the chest is formed using the two A\/2 loops together; they must not be used as two independent attachment points. The upper straps are made from ELASTYX. The shoulder and seat straps are adjustable and must be set to suit the wearer’s body shape.\u003c\/p\u003e\n\u003ch2\u003eInspection and system limitations\u003c\/h2\u003e\n\u003cp\u003eBefore every use, inspect the straps, stitching, buckles and attachment points for damage and correct condition. A thorough inspection by a competent person is required at least every twelve months; conditions of use may require shorter intervals. The harness must be integrated into a suitable fall arrest system. Its other components must also be suitable for the total weight and application.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e ERGOTEK FAST\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 361:2002\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum user weight:\u003c\/strong\u003e Up to 150 kg including equipment and tools\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUpper straps:\u003c\/strong\u003e Stretchable ELASTYX material\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDorsal attachment:\u003c\/strong\u003e Galvanised-steel D-ring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSternal attachment:\u003c\/strong\u003e Two A\/2 loops to be used together\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuckles:\u003c\/strong\u003e Two coated-steel quick-release buckles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Adjustable seat and shoulder straps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e S–2XL and L–3XL\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cofra\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow are the sternal A\/2 loops used?\u003c\/h3\u003e\n\u003cp\u003eThe two sternal A\/2 loops are used together as one sternal attachment. They are not intended to be used as two independent attachment points.\u003c\/p\u003e\n\u003ch3\u003eWhat must be checked before every use?\u003c\/h3\u003e\n\u003cp\u003eBefore every use, inspect the straps, stitching, buckles and attachment points for visible damage, wear and correct condition.\u003c\/p\u003e\n\u003ch3\u003eHow do I choose the right size?\u003c\/h3\u003e\n\u003cp\u003eThe available sizes are S–2XL and L–3XL. Choose according to body measurements and the manufacturer’s specifications, then adjust the shoulder and seat straps correctly.\u003c\/p\u003e\n\u003ch3\u003eIs the harness alone a complete fall arrest system?\u003c\/h3\u003e\n\u003cp\u003eNo. It must be used with suitable connecting devices and a suitable anchor device.\u003c\/p\u003e","brand":"Cofra","offers":[{"title":"s-2xl","offer_id":65073249223005,"sku":"4939-s-2xl","price":50.09,"currency_code":"EUR","in_stock":false},{"title":"l-3xl","offer_id":65072859808093,"sku":"4939-l-3xl","price":50.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/auffanggurtjpg-11968979.jpg?v=1782381630"},{"product_id":"elysee-schutzbrille-lens","title":"TECTOR safety glasses LENS with reading strength, +1.0 to +3.0 dioptres","description":"\u003cp\u003eRead small labels and scales at close range: TECTOR LENS combines safety glasses to EN 166 with an integrated reading aid. Five plus strengths from +1.0 to +3.0 dioptres are available. The clear polycarbonate lens has a scratch-resistant coating; flexible arms and nose pads support the fit.\u003c\/p\u003e\n\u003ch2\u003eSafety glasses with reading strength for close work\u003c\/h2\u003e\n\u003cp\u003eThe integrated reading correction helps when looking at nearby objects. Choose the strength suited to your visual needs from +1.0, +1.5, +2.0, +2.5 and +3.0 dioptres.\u003c\/p\u003e\n\u003ch2\u003eClear lens and side protection\u003c\/h2\u003e\n\u003cp\u003eThe spectacles have side protection and weigh approximately 27 g in total. The lens is made from clear polycarbonate; the frame is clear and yellow.\u003c\/p\u003e\n\u003ch2\u003eTreat the coated lens with care\u003c\/h2\u003e\n\u003cp\u003eThe scratch-resistant coating protects the lens during everyday work but does not make it scratch-proof. Store the glasses safely and replace them if damaged or if vision is impaired.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e TECTOR LENS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 166\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLens:\u003c\/strong\u003e Polycarbonate, clear, scratch-resistant coated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrame:\u003c\/strong\u003e Polycarbonate, clear\/yellow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReading strengths:\u003c\/strong\u003e +1.0 \/ +1.5 \/ +2.0 \/ +2.5 \/ +3.0 dioptres\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFit:\u003c\/strong\u003e Flexible nose pads and arms, with side protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal weight:\u003c\/strong\u003e Approx. 27 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich reading strengths are available?\u003c\/h3\u003e\n\u003cp\u003e+1.0, +1.5, +2.0, +2.5 and +3.0 dioptres are available. Choose the strength suited to your needs for close work.\u003c\/p\u003e\n\u003ch3\u003eDo the LENS glasses replace individually prescribed corrective glasses?\u003c\/h3\u003e\n\u003cp\u003eLENS offers fixed plus strengths as a reading aid. Individual correction, such as different values for each eye or minus correction, is not covered.\u003c\/p\u003e\n\u003ch3\u003eAre the glasses completely scratch-proof?\u003c\/h3\u003e\n\u003cp\u003eNo. The lens has a scratch-resistant coating, but hard objects or improper cleaning can damage it.\u003c\/p\u003e\n\u003ch3\u003eHow much do the glasses weigh?\u003c\/h3\u003e\n\u003cp\u003eThe complete glasses weigh approximately 27 g. They have flexible nose pads and arms as well as side protection.\u003c\/p\u003e","brand":"Feldtmann","offers":[{"title":"'+1,0","offer_id":65896741470557,"sku":"A1091-10","price":5.49,"currency_code":"EUR","in_stock":false},{"title":"'+1,5","offer_id":65896741503325,"sku":"A1091-15","price":5.49,"currency_code":"EUR","in_stock":false},{"title":"'+2,0","offer_id":65896741536093,"sku":"A1091-20","price":5.49,"currency_code":"EUR","in_stock":false},{"title":"'+2,5","offer_id":65896741568861,"sku":"A1091-25","price":5.49,"currency_code":"EUR","in_stock":false},{"title":"'+3,0","offer_id":65896741601629,"sku":"A1091-30","price":5.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/41958jpg-11969219.jpg?v=1782382279"},{"product_id":"tams-bauhelm-en-397-en-50365-5361-cm","title":"TAMS safety helmet EN 397 \/ EN 50365, 53–61 cm","description":"\u003cp\u003eThe TAMS safety helmet combines an HDPE shell with a six-point suspension. The head size adjusts from 53 to 61 cm. Three height positions and a fabric-covered sweatband allow adjustment to the head. Weighing 322 g, the helmet complies with EN 397 and EN 50365, class 0.\u003c\/p\u003e\n\u003ch2\u003eAdjusting the fit and wearing height\u003c\/h2\u003e\n\u003cp\u003eAdjust the head size and suspension height so that the helmet sits securely without pressure. The six attachment points connect the suspension to the shell. Keep the intended space between the head and shell clear and do not store objects in it.\u003c\/p\u003e\n\u003ch2\u003eMechanical and electrical head protection\u003c\/h2\u003e\n\u003cp\u003eEN 397 concerns the industrial safety helmet. The model is also specified to EN 50365 as a class 0 electrically insulating helmet for installations up to 1,000 V AC or 1,500 V DC. It is part of the protective equipment appropriate for the work and does not alone protect the whole body from electrical hazards.\u003c\/p\u003e\n\u003ch2\u003eAccessories and temperature range\u003c\/h2\u003e\n\u003cp\u003eThe helmet has a 30 mm accessory slot. Accessories must be expressly suitable for use with this helmet; slot width alone is not sufficient. The stated operating temperature range is −20 to +50 °C.\u003c\/p\u003e\n\u003ch2\u003eAvailable colours\u003c\/h2\u003e\n\u003cp\u003eThis version is available in yellow and white.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnchor points:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 322 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e Adjustable in three height positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlot:\u003c\/strong\u003e 30 mm accessory slot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0; installations up to 1,000 V AC \/ 1,500 V DC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -20 to +50 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSweatband:\u003c\/strong\u003e Fabric-covered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Yellow and white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the helmet to my head?\u003c\/h3\u003e\n\u003cp\u003eAdjust the suspension to your head circumference. The range is 53 to 61 cm. Three height positions are also available. The helmet should remain secure when you tilt your head, without pressure points.\u003c\/p\u003e\n\u003ch3\u003eWill every accessory with a 30 mm mount fit?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount width only describes the mechanical size. Ear defenders, visors and other accessories must be suitable for use with this helmet and fitted according to the relevant instructions.\u003c\/p\u003e\n\u003ch3\u003eIs EN 397 sufficient evidence of electrical insulation?\u003c\/h3\u003e\n\u003cp\u003eNo. This helmet additionally specifies EN 50365, class 0, for that purpose. The suitability of the complete protective equipment and working method must match the electrical hazard.\u003c\/p\u003e\n\u003ch3\u003eMust I replace the helmet after a strong impact?\u003c\/h3\u003e\n\u003cp\u003eYes. Remove the helmet from service after a significant blow or impact, even if no external damage is visible. Otherwise, assess service life and replacement intervals using the manufacturer’s instructions and helmet marking.\u003c\/p\u003e\n\u003ch3\u003eHow should I store the safety helmet after work?\u003c\/h3\u003e\n\u003cp\u003eStore it clean and dry, protected from unnecessary heat and direct sunlight. Do not apply solvents or unauthorised paints or adhesives to the shell. Check the shell, suspension and fastenings before use.\u003c\/p\u003e","brand":"TAMS","offers":[{"title":"White","offer_id":65072916103517,"sku":"9156-w","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":65072916005213,"sku":"9156-gr","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":65072916070749,"sku":"9156-r","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Arancio","offer_id":65072916037981,"sku":"9156-o","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":65072913842525,"sku":"9156-ge","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":65072866853213,"sku":"9156-b","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":65072913809757,"sku":"9156-g","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/white-1jpg-11821747.jpg?v=1777037391"},{"product_id":"planam-en-14404-knieschoner-typ-2","title":"Planam EVA knee pads for knee pockets, 1 pair","description":"\u003cp\u003eThe Planam knee pads are inserted into the knee pockets of compatible Planam workwear. The pair is made from EVA material and has a honeycomb structure. Each pad measures 25 × 13.5 cm.\u003c\/p\u003e\n\u003ch2\u003eKnee protection in the correct combination\u003c\/h2\u003e\n\u003cp\u003eThe pads form part of knee protection according to EN 14404 Type 2. The applicable protection level applies to the tested combination with the corresponding trousers. Follow the workwear manufacturer’s information when choosing the product.\u003c\/p\u003e\n\u003ch2\u003eRemove before washing\u003c\/h2\u003e\n\u003cp\u003eThe inserts must not be washed in a washing machine. Remove them before washing the trousers and check them regularly for damage or permanent deformation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 9901027\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100 % EVA\/EVAC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 25 × 13.5 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Type 2 knee protection for knee pockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eAre these universal knee protectors for every pair of trousers?\u003c\/h3\u003e\n\u003cp\u003eNo. Their protective performance can only be assessed in the approved combinations with suitable Planam workwear.\u003c\/p\u003e\n\u003ch3\u003eCan I wash the inserts with the trousers?\u003c\/h3\u003e\n\u003cp\u003eNo. Remove them before machine washing. The pads themselves are not machine washable.\u003c\/p\u003e","brand":"Planam","offers":[{"title":"Default Title","offer_id":65072898736477,"sku":"B1649","price":7.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/30-9901027qw04vitnevzpm1280x1280jpg-11969436.jpg?v=1782383753"},{"product_id":"doppel-halteseil-portwest-elastisches-mit-bandfalldaempfer","title":"Portwest Y-lanyard FP52 with energy absorber","description":"\u003cp\u003eThe Portwest FP52 is an elastic Y fall arrest lanyard with an integrated energy absorber. Two legs allow connection to anchor points while moving, and the elastic webbing creates fewer loose loops.\u003c\/p\u003e\n\u003ch2\u003eLanyard for work at height\u003c\/h2\u003e\n\u003cp\u003eFully extended, the lanyard is 180 cm long and has two 52-mm scaffold hooks and one 19-mm karabiner. The manufacturer specifies a maximum load of 100 kg.\u003c\/p\u003e\n\u003ch2\u003eComponents to the stated standards\u003c\/h2\u003e\n\u003cp\u003eThe energy absorber reduces the load in the event of a fall. The product is specified according to EN 354, EN 355 and EN 362; the anchor point, harness and clearance must be suitable for the application.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Portwest\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e FP52\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 1.8 m including connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Elastic polyester webbing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 354:2010, EN 355:2002, EN 362:2004\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum load:\u003c\/strong\u003e 100 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow long is the lanyard?\u003c\/h3\u003e\n\u003cp\u003eThe FP52 is 180 cm long when fully extended, including the connectors.\u003c\/p\u003e\n\u003ch3\u003eCan the lanyard replace every fall protection system?\u003c\/h3\u003e\n\u003cp\u003eNo. It must be used with a suitable harness, anchor point and sufficient clearance. The instructions and risk assessment are binding.\u003c\/p\u003e","brand":"Portwest","offers":[{"title":"Default Title","offer_id":65072899522909,"sku":"B6372","price":45.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/fp52yerjpg-11969946.jpg?v=1782387046"},{"product_id":"neo-tools-kapselgehoerschutz-mit-g-tech-schaum-und-snr-30-db","title":"Ear defenders with G-Tech foam and SNR 30 dB – NEO Tools","description":"\u003cp\u003eThese NEO Tools ear defenders combine ear cups with G-Tech foam and a padded, adjustable headband. The single-number rating is SNR 30 dB. Selection depends on the noise exposure at the workplace.\u003c\/p\u003e\n\u003ch2\u003eSound attenuation values and frequency range\u003c\/h2\u003e\n\u003cp\u003eThe SNR value is 30 dB. SNR is a single rating used to assess the sound attenuation provided by hearing protection. In addition, H = 32 dB, M = 28 dB and L = 19 dB are specified. Mean attenuation values and APV values are provided for several frequencies.\u003c\/p\u003e\n\u003ch2\u003eMaterial and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe ear cups are fitted with G-Tech foam. The padded headband is adjustable so that the ear cups can be adapted to different head sizes.\u003c\/p\u003e\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp\u003ePut the ear defenders on before entering the noisy area and wear them continuously there. The ear cups must completely enclose the ears. Whether the model is sufficient for a machine and task must be assessed using the noise exposure and attenuation values.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO Tools\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSound attenuation rating:\u003c\/strong\u003e SNR 30 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional values:\u003c\/strong\u003e H = 32 dB, M = 28 dB, L = 19 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Category III PPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInsulation:\u003c\/strong\u003e G-Tech foam\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Padded and adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMean attenuation:\u003c\/strong\u003e 125 Hz: 14.2 dB; 250 Hz: 22.4 dB; 500 Hz: 32.9 dB; 1000 Hz: 38.1 dB; 2000 Hz: 35.5 dB; 4000 Hz: 34.0 dB; 8000 Hz: 35.0 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAPV values:\u003c\/strong\u003e 125 Hz: 10.3 dB; 250 Hz: 19.4 dB; 500 Hz: 28.9 dB; 1000 Hz: 35.0 dB; 2000 Hz: 32.0 dB; 4000 Hz: 29.4 dB; 8000 Hz: 31.1 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 352-1:2002\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard deviation:\u003c\/strong\u003e 125 Hz: 4.0 dB; 250 Hz: 3.0 dB; 500 Hz: 4.0 dB; 1000 Hz: 3.1 dB; 2000 Hz: 3.6 dB; 4000 Hz: 4.5 dB; 8000 Hz: 3.8 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does SNR 30 dB mean?\u003c\/h3\u003e\n\u003cp\u003eSNR is a rating used when selecting hearing protection. It is not a promise that exactly 30 dB less sound will reach the ear in all conditions. Actual protection also depends on fit and noise exposure.\u003c\/p\u003e\n\u003ch3\u003eHow is the headband adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe padded headband can be adjusted. The ear cups should then sit closely and comfortably.\u003c\/p\u003e\n\u003ch3\u003eHow can I tell whether the seal is good?\u003c\/h3\u003e\n\u003cp\u003eThe sealing cushions should sit evenly around the ears, without gaps or twisted padding. A comfortable, even fit supports the intended attenuation.\u003c\/p\u003e\n\u003ch3\u003eHow are the ear cups and headband cleaned and inspected?\u003c\/h3\u003e\n\u003cp\u003eBefore each use, check the cushions, cups and headband for cracks or wear. Do not use abrasive or aggressive cleaning products. Damaged parts impair the seal; clean and replace them according to the instructions.\u003c\/p\u003e\n\u003ch3\u003eWhat do H, M and L mean?\u003c\/h3\u003e\n\u003cp\u003eH, M and L are additional attenuation values for high, medium and low frequencies. For this model, H = 32 dB, M = 28 dB and L = 19 dB are specified.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65073049764189,"sku":"3994","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/gehrschutz-11968930.jpg?v=1782381087"},{"product_id":"neo-tools-kapselgehoerschutz-snr-27-db-164-g","title":"Ear defenders SNR 27 dB, 164 g – NEO Tools","description":"\u003cp\u003eThese NEO Tools ear defenders weigh 164 g and have soft ear cushions and an adjustable spring headband. Their single-number rating is SNR 27 dB. For use in a workshop or workplace, the attenuation and fit must suit the relevant noise exposure.\u003c\/p\u003e\n\u003ch2\u003eFit and comfort\u003c\/h2\u003e\n\u003cp\u003eThe ear cups enclose the ears. Their position at the ends of the headband can be adjusted so that the band rests on the head and the cushions seal evenly. The design is in the medium size range.\u003c\/p\u003e\n\u003ch2\u003eSound attenuation\u003c\/h2\u003e\n\u003cp\u003eIn addition to the SNR value of 27 dB, the attenuation values H = 33 dB, M = 24 dB and L = 15 dB are specified for different frequency ranges. These values support selection based on noise exposure. Protection requires correct fit and continuous wear in the noisy area.\u003c\/p\u003e\n\u003ch2\u003eWearing and storage\u003c\/h2\u003e\n\u003cp\u003ePut the ear defenders on before entering the noisy area. After use, store them clean and dry, protect them from solvents and direct sunlight, and do not place heavy objects on them.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO Tools\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSNR:\u003c\/strong\u003e 27 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 164 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e Category III PPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard information:\u003c\/strong\u003e EN 352-1:2002\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar cushions:\u003c\/strong\u003e Softly padded\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Adjustable pressure spring\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange\/black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation values H\/M\/L:\u003c\/strong\u003e H 33 dB, M 24 dB, L 15 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize range:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs SNR 27 dB enough for my machine?\u003c\/h3\u003e\n\u003cp\u003eThe SNR value alone cannot answer this. Noise exposure, the attenuation required and a close fit are decisive. Compare the attenuation values with the requirements of the workplace.\u003c\/p\u003e\n\u003ch3\u003eDoes the headband adjust automatically?\u003c\/h3\u003e\n\u003cp\u003eThe cups must be positioned correctly at the ends of the headband. The headband should rest on the head while the cushions completely enclose both ears. Automatic adjustment to every head shape is not provided.\u003c\/p\u003e\n\u003ch3\u003eWill warning signals and conversations always remain audible?\u003c\/h3\u003e\n\u003cp\u003eThis cannot be guaranteed generally. Intelligibility depends on background noise, the signal and the attenuation. Required warning signals must remain perceptible in the workplace while the hearing protection is worn.\u003c\/p\u003e\n\u003ch3\u003eCan I briefly remove the ear defenders in the noisy area?\u003c\/h3\u003e\n\u003cp\u003ePut them on before entering and wear them throughout the entire time spent there. Even short interruptions reduce the protection achieved over time.\u003c\/p\u003e\n\u003ch3\u003eWhen should I check the cushions and headband?\u003c\/h3\u003e\n\u003cp\u003eBefore every use, check for cracks, wear and secure fit. Damaged cushions or a weakened headband can impair the seal. Do not use aggressive or abrasive cleaning products; follow the instructions for care and replacement.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65073055105373,"sku":"4082","price":4.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/neo-tools-gehrschutzjpg-11968933.jpg?v=1782381101"},{"product_id":"neo-tools-kapselgehoerschutz-snr-25-db","title":"Ear Defenders SNR 25 dB – NEO Tools","description":"\u003cp\u003eNEO Tools ear defenders provide an SNR value of 25 dB. Soft cushions and a flexible headband support comfortable wearing. The headband and ear cups can be adjusted and positioned manually.\u003c\/p\u003e\n\u003ch2\u003eHearing protection for noisy work\u003c\/h2\u003e\n\u003cp\u003eSuitable for work in workshops, gardens, on construction sites or in industry. Whether the attenuation is sufficient for the specific workplace depends on the noise exposure and correct fit. The ear defenders are assigned to the medium size range.\u003c\/p\u003e\n\u003ch2\u003eFeatures and fit\u003c\/h2\u003e\n\u003cp\u003eThe soft cushions sit comfortably around the ears. Manually adjust and position the flexible headband and ear cups so that they seal all around. Weight: 178 g.\u003c\/p\u003e\n\u003ch2\u003eAttenuation values and standard\u003c\/h2\u003e\n\u003cp\u003eMade according to EN 352-1:2002, PPE Category III. The SNR value is 25 dB. In addition, H = 31 dB, M = 22 dB and L = 14 dB are specified for high, medium and low frequencies.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO Tools\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation:\u003c\/strong\u003e SNR 25 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 352-1:2002\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCategory:\u003c\/strong\u003e III\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\/orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 178 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar cups:\u003c\/strong\u003e Cups with soft cushions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Flexible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation values:\u003c\/strong\u003e H31\/M22\/L14\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Construction site, workshop, DIY, gardening and industry\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize range:\u003c\/strong\u003e Medium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow can I position the ear defenders correctly?\u003c\/h3\u003e\n\u003cp\u003eManually adjust the flexible headband and ear cups and position them so that the cushions seal all around without pressing uncomfortably.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between SNR and H, M and L?\u003c\/h3\u003e\n\u003cp\u003eSNR is a combined attenuation value from laboratory testing. H, M and L describe attenuation at high, medium and low frequencies. Here they are 31, 22 and 14 dB; protection is therefore not identical for all noises.\u003c\/p\u003e\n\u003ch3\u003eDoes SNR 25 dB mean uniform attenuation for every noise?\u003c\/h3\u003e\n\u003cp\u003eNo. The SNR value does not describe 25 dB attenuation at every frequency. Actual protection depends, among other things, on correct fit and the noise concerned.\u003c\/p\u003e\n\u003ch3\u003eCan I wear the ear defenders with glasses?\u003c\/h3\u003e\n\u003cp\u003eGlasses arms can affect the tight seal of the cushions. The cups must fully enclose the ears and seal all around. With other protective equipment, also check that the items do not interfere with each other.\u003c\/p\u003e\n\u003ch3\u003eWhat should I do if the cushions are damaged?\u003c\/h3\u003e\n\u003cp\u003eDo not continue using the ear defenders if the cushions are damaged or hardened. If suitable replacement cushions specified by the manufacturer are available, use them; otherwise replace the ear defenders.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65073059004765,"sku":"4294","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/gehrschutz-11968938.jpg?v=1782381127"},{"product_id":"oregon-yukon-forsthelm-mit-edelstahl-netzvisier-und-gehoerschutz","title":"Oregon forestry helmet Yukon with stainless steel mesh visor and ear defenders","description":"\u003cp\u003eThe Oregon Yukon combines an impact-resistant helmet shell, a wide lift-up stainless-steel mesh visor and integrated ear defenders. The 6-point harness is adjustable, while six ventilation openings support air circulation.\u003c\/p\u003e\n\u003ch2\u003eHelmet shell and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe helmet shell is made from polypropylene. The adjustable 6-point harness supports fitting to different head shapes and circumferences. Six ventilation openings support air circulation.\u003c\/p\u003e\n\u003ch2\u003eStainless-steel visor\u003c\/h2\u003e\n\u003cp\u003eThe hinged stainless-steel mesh visor covers the face area. The mesh openings allow airflow but do not fully stop fine particles. Select additional eye protection according to the hazard and the markings on the protective equipment.\u003c\/p\u003e\n\u003ch2\u003eEar defenders and 3-in-1 protection\u003c\/h2\u003e\n\u003cp\u003eThe ear defenders have a stated SNR value of 25.9 dB. Head, face and hearing protection are combined in one unit; suitability depends on the markings and the work being carried out.\u003c\/p\u003e\n\u003ch2\u003eUse and storage\u003c\/h2\u003e\n\u003cp\u003eAdjust the internal harness correctly before starting work. The ear-cup cushions must seal against the head; glasses arms or hair, for example, can affect the fit. Store the helmet dry, protected from direct sunlight and without tools placed on it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Oregon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Yukon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e Impact-resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVisor:\u003c\/strong\u003e Wide, stainless steel, lift-up\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHearing protection:\u003c\/strong\u003e Padded ear defenders, SNR 25.9 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e 6 ventilation openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e 3-in-1 protection: head, face and hearing protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Adjustable 6-point harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does an SNR value of 25.9 dB mean?\u003c\/h3\u003e\n\u003cp\u003eSNR is a single-number rating of sound attenuation determined under test conditions. Actual exposure at the ear also depends on the noise and the ear cups’ tight fit. Do not treat the value as a guaranteed deduction from machine noise.\u003c\/p\u003e\n\u003ch3\u003eCan the stainless-steel visor be lifted up?\u003c\/h3\u003e\n\u003cp\u003eYes. When not required, the visor can be lifted upwards, for example during breaks or tasks without saw use.\u003c\/p\u003e\n\u003ch3\u003eDoes the helmet fit different head sizes?\u003c\/h3\u003e\n\u003cp\u003eThe internal harness is adjustable. The six points refer to the harness attachment points in the shell; they are not six size settings. After adjustment, the helmet must sit securely without uncomfortable pressure.\u003c\/p\u003e\n\u003ch3\u003eAre the ear defenders replaceable?\u003c\/h3\u003e\n\u003cp\u003eThe ear cups are intended as wear parts and can be obtained as replacement parts when required. Follow the manufacturer’s information for the correct version.\u003c\/p\u003e\n\u003ch3\u003eIs a matching neck protector available?\u003c\/h3\u003e\n\u003cp\u003eA matching Oregon neck protector is available for the Yukon. It is intended to provide additional rain and sun protection around the neck.\u003c\/p\u003e\n\u003ch3\u003eWhen must the forestry helmet be replaced?\u003c\/h3\u003e\n\u003cp\u003eDo not continue using it after a severe impact or if it is damaged, even if the damage is not initially visible. Also follow the service life and replacement intervals in the manufacturer’s instructions.\u003c\/p\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":65073073389917,"sku":"4603","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/562412-11968963.jpg?v=1782381456"},{"product_id":"absperrkette-rot-weiss-25-m-6-mm-aus-polyethylen","title":"Red\/White Barrier Chain, 25 m, 6 mm Polyethylene","description":"\u003cp\u003eThe red-and-white barrier chain provides highly visible, temporary demarcation for building sites, event areas, parking areas and business premises. At 25 metres long, it can be run between several suitable posts or fixing points. Polyethylene makes the chain lightweight, flexible and rust-free. The chain-link material thickness is 6 mm.\u003c\/p\u003e\n\u003ch2\u003eQuick to install and remove\u003c\/h2\u003e\n\u003cp\u003eThe flexible plastic material is easy to transport, roll up and attach to suitable barrier posts, pillars or stakes. Several chains can be joined together if required.\u003c\/p\u003e\n\u003ch2\u003eHighly visible demarcation\u003c\/h2\u003e\n\u003cp\u003eThe red and white colour scheme creates clear contrast and marks areas and routes. The chain does not replace a fixed or load-bearing protective barrier.\u003c\/p\u003e\n\u003ch2\u003eFor indoor and outdoor areas\u003c\/h2\u003e\n\u003cp\u003eThe weather-resistant plastic chain is suitable for visual demarcation indoors and outdoors. After use, store it clean and without high tension. Check damaged links and connection points before the next use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 25 m in one piece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial thickness:\u003c\/strong\u003e 6 mm chain-link material thickness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (PE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Red\/white\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e Lightweight, flexible, rust-free and weather-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Temporary visual demarcation on building sites, at events, in car parks, on business premises and in multi-storey car parks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does 6 mm mean when choosing a chain holder?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the material thickness of the links. The link opening and the holder shape must also match. The 6 mm specification alone does not guarantee compatibility.\u003c\/p\u003e\n\u003ch3\u003eHow can I extend a barrier?\u003c\/h3\u003e\n\u003cp\u003eJoin chain sections with suitable connecting links or hooks. Closed links cannot simply be hooked into one another. Additional posts help support long runs.\u003c\/p\u003e\n\u003ch3\u003eCan I use the chain to secure an unprotected edge?\u003c\/h3\u003e\n\u003cp\u003eNo. The chain marks a boundary visually and does not safely restrain people or loads. Fall protection or restraint requires a suitable system designed for that purpose.\u003c\/p\u003e\n\u003ch3\u003eIs 25 m enough for a 25 m gap between two posts?\u003c\/h3\u003e\n\u003cp\u003eHanging creates sag and requires additional length at the fixing points. Do not tension the chain across the entire distance. Plan additional support points and a length reserve.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":65073082728797,"sku":"5179","price":21.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/traffic-chain6-cw-jpg-11969189.jpg?v=1782381812"},{"product_id":"buegel-ohrstoepsel-neo-tools","title":"Reusable banded earplugs – NEO","description":"\u003cp\u003eThe NEO banded earplugs are made from plastic and have a flexible band. They are reusable, easy to clean and can be worn around the neck during short interruptions.\u003c\/p\u003e\n\u003ch2\u003eBand for ready-to-use carrying\u003c\/h2\u003e\n\u003cp\u003eThe band connects both earplugs and makes them easier to put on and remove. When hearing protection is briefly not required, the band can be worn around the neck.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe plugs and band are made from plastic. Clean them with water and mild soap, then leave the parts to dry.\u003c\/p\u003e\n\u003ch2\u003eShape and size\u003c\/h2\u003e\n\u003cp\u003eThe earplugs are conical and made in a universal size. No specific attenuation value, standard or protection class is included in the product data.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NEO TOOLS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Banded earplugs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEarplugs:\u003c\/strong\u003e Conical shape\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBand:\u003c\/strong\u003e Flexible plastic band\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Universal size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow plugs, blue band\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Washable with water and mild soap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Reusable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow are the earplugs cleaned?\u003c\/h3\u003e\n\u003cp\u003eWash them with water and mild soap, then leave them to dry.\u003c\/p\u003e\n\u003ch3\u003eHow is the band worn?\u003c\/h3\u003e\n\u003cp\u003eDuring a short interruption, the band can be worn around the neck.\u003c\/p\u003e\n\u003ch3\u003eAre the earplugs reusable?\u003c\/h3\u003e\n\u003cp\u003eYes. They can be used again after cleaning.\u003c\/p\u003e\n\u003ch3\u003eWhen should the earplugs be replaced?\u003c\/h3\u003e\n\u003cp\u003eDo not continue using them if they are deformed, damaged or no longer fit securely.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65073084432733,"sku":"5385","price":1.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/97-553jpg-11969190.jpg?v=1782381817"},{"product_id":"hoegert-venedig-schutzbrille-klar-en-166-mit-seitenschutz","title":"Högert safety glasses Venedig clear, EN 166, with side protection","description":"\u003cp\u003eThe clear Högert Venedig safety glasses protect the eyes during mechanical work within the limits of their F marking. Profiled polycarbonate lenses also cover the eyes at the sides. The glasses have optical class 1 and can be worn over suitable prescription glasses. Wide temples with ventilation channels support air circulation.\u003c\/p\u003e\n\u003ch2\u003eEye protection for mechanical work\u003c\/h2\u003e\n\u003cp\u003eThe F marking indicates low-energy impact at a test speed of 45 m\/s. Whether this protection level is sufficient for drilling, sawing or grinding depends on the specific hazard. The glasses are not suitable for welding work.\u003c\/p\u003e\n\u003ch2\u003eClear vision and side coverage\u003c\/h2\u003e\n\u003cp\u003eThe rimless lens system provides a wide field of vision. Optical class 1 is intended for prolonged wear and does not indicate a prescription strength. A scratch-resistant coating complements the lenses; dirty or damaged lenses can still impair vision.\u003c\/p\u003e\n\u003ch2\u003eCheck the fit over prescription glasses\u003c\/h2\u003e\n\u003cp\u003eThe safety glasses must sit securely over your own glasses. When trying them on, check whether the temples press and whether side coverage is maintained. Ventilation openings support air exchange but do not prevent fogging in all conditions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Venedig\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 166:2001\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLenses:\u003c\/strong\u003e Polycarbonate, transparent, profiled\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStrength:\u003c\/strong\u003e F, test speed 45 m\/s for low-energy impact\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOptical class:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSide protection:\u003c\/strong\u003e Profiled lenses with side coverage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoating:\u003c\/strong\u003e Scratch-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemples:\u003c\/strong\u003e Polycarbonate, wide, with ventilation channels and holes at the temple ends\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLens system:\u003c\/strong\u003e Rimless\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePrescription glasses:\u003c\/strong\u003e Can be worn over prescription glasses\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUV filter:\u003c\/strong\u003e 2C-1.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the safety glasses fit over my normal glasses?\u003c\/h3\u003e\n\u003cp\u003eThey are suitable for wearing over prescription glasses. The individual combination must still fit: both pairs should sit securely without pressing against each other or impairing side protection.\u003c\/p\u003e\n\u003ch3\u003eAre the glasses sufficient for every grinding job?\u003c\/h3\u003e\n\u003cp\u003eNo. The F marking is limited to low-energy impact. The tool, workpiece and possible particles determine the eye and, where necessary, face protection required.\u003c\/p\u003e\n\u003ch3\u003eWhat should I do if the lenses fog up during work?\u003c\/h3\u003e\n\u003cp\u003eStop work safely and restore clear vision. Remove dirt and check the fit. The ventilation channels support air circulation but do not guarantee fog-free use.\u003c\/p\u003e\n\u003ch3\u003eCan I continue using heavily scratched safety glasses?\u003c\/h3\u003e\n\u003cp\u003eHeavy scratches or other damage can impair vision and protection. Replace damaged glasses and check for clear vision and undamaged parts before the next use.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073086693725,"sku":"5413","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k009jpg-11969194.jpg?v=1782381850"},{"product_id":"hoegert-oder-kniepolster-fuer-arbeitshosen-eva-175-270-mm-paar","title":"Högert knee pads Oder for work trousers, EVA, 175 × 270 mm, pair","description":"\u003cp\u003eThe black Högert Oder knee pads cushion the knees when working at ground level. They are inserted into suitable knee pockets in work trousers. The lightweight EVA foam does not absorb water; its ergonomic shape and ribbed structure make bending easier. One pair contains two pads, each measuring 175 × 270 mm.\u003c\/p\u003e\n\u003ch2\u003eChoose suitable knee pockets\u003c\/h2\u003e\n\u003cp\u003eBefore buying, compare the size and shape of the knee pockets with the 175 × 270 mm pads. When inserting them, ensure the correct position: when kneeling, the pad must remain under the knee without slipping or folding.\u003c\/p\u003e\n\u003ch2\u003eFlexible cushioning for ground-level work\u003c\/h2\u003e\n\u003cp\u003eThe ribbed structure supports movement when kneeling and standing up. The insert pads are suitable, for example, for installation work, laying flooring and gardening. Remove sharp objects and hard dirt particles from the work area before kneeling.\u003c\/p\u003e\n\u003ch2\u003eMaterial and care\u003c\/h2\u003e\n\u003cp\u003eThe closed-cell EVA foam does not absorb water. It does not make the trousers waterproof. Remove the pads before washing the trousers and clean them separately. Check for cracks, severe deformation and wear before reinserting them.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Oder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Closed-cell EVA foam\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial designation:\u003c\/strong\u003e Ethylene-vinyl acetate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Insert knee pads\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Ergonomic, shaped for the knee\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSurface:\u003c\/strong\u003e Ribbed cut or flexible ribbed structure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttachment:\u003c\/strong\u003e Insert into the knee pockets of work trousers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMoisture:\u003c\/strong\u003e EVA does not absorb moisture\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 175 × 270 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 1 pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Cushioning in suitable knee pockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I wear the pads without knee pockets?\u003c\/h3\u003e\n\u003cp\u003eNo. This insert design is held in place by the knee pockets of the work trousers and has no separate attachment to the leg.\u003c\/p\u003e\n\u003ch3\u003eHow do I check that the pads are positioned correctly?\u003c\/h3\u003e\n\u003cp\u003eAfter inserting them, kneel down carefully. The knee should rest on the pad; it must not slide sideways or fold inside the pocket.\u003c\/p\u003e\n\u003ch3\u003eWill my knees stay dry on wet ground?\u003c\/h3\u003e\n\u003cp\u003eThe EVA foam itself does not absorb water. However, it does not seal the trousers. Additional suitable clothing is required for wet working areas.\u003c\/p\u003e\n\u003ch3\u003eCan I machine-wash the pads with the trousers?\u003c\/h3\u003e\n\u003cp\u003eRemove the pads first. Wash the trousers according to their care label and care for the inserts separately. Replace damaged or permanently deformed pads.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073087185245,"sku":"5414","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k290jpg-11969195.jpg?v=1782381866"},{"product_id":"hoegert-wald-kapselgehoerschutz-snr-28-db-en-352-1","title":"Högert ear defenders Wald, SNR 28 dB, EN 352-1","description":"\u003cp\u003eThe Högert Wald ear defenders attenuate noise with an SNR value of 28 dB under test conditions. Foam-filled ear cushions enclose the ears, while the height-adjustable headband adapts to the head. Whether the model is sufficient for a particular machine or activity depends on the noise exposure and correct fit.\u003c\/p\u003e\n\u003ch2\u003eFit the ear cups completely\u003c\/h2\u003e\n\u003cp\u003eAdjust the headband so that the ears are fully inside the cups. The cushions must seal all around the head. Hair, hats and thick spectacle temples can impair the seal.\u003c\/p\u003e\n\u003ch2\u003eChoose attenuation suitable for the workplace\u003c\/h2\u003e\n\u003cp\u003eSNR 28 dB is a single-number attenuation value from testing. It does not mean that exactly 28 dB can be deducted from the machine noise level in every application. Consider the noise exposure and hearing protection requirements for workshop and gardening work.\u003c\/p\u003e\n\u003ch2\u003eCheck the cushions and headband\u003c\/h2\u003e\n\u003cp\u003eBefore use, inspect the ear cushions for cracks, hardening and deformation. The headband must also be undamaged and hold the cups securely in place. Do not continue using damaged hearing protection; use only approved replacement parts.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Wald\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Ear defenders\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation value:\u003c\/strong\u003e SNR 28 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 352-1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePPE category:\u003c\/strong\u003e III\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar cushions:\u003c\/strong\u003e Foam-filled, sound-attenuating\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Height-adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar cup housing:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow can I tell whether the ear cups fit correctly?\u003c\/h3\u003e\n\u003cp\u003eThe ears must be fully inside the cups. Adjust the headband and check that the cushions seal all around without being interrupted by hair or clothing.\u003c\/p\u003e\n\u003ch3\u003eCan I wear the ear defenders with glasses?\u003c\/h3\u003e\n\u003cp\u003eThis is possible if the combination fits correctly. Spectacle temples can interrupt the seal and reduce attenuation. Check the combination carefully before work.\u003c\/p\u003e\n\u003ch3\u003eIs SNR 28 dB enough for my lawnmower or saw?\u003c\/h3\u003e\n\u003cp\u003eThe SNR value alone cannot determine this. The machine’s noise exposure, duration of use and wearing conditions must match the required protection.\u003c\/p\u003e\n\u003ch3\u003eWhat should I do if the ear cushions are cracked?\u003c\/h3\u003e\n\u003cp\u003eDo not continue using the ear defenders with damaged cushions. Use only suitable replacement parts approved by the manufacturer, or replace the ear defenders.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073089675613,"sku":"5417","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k177jpg-11969196.jpg?v=1782381885"},{"product_id":"anstosskappe-hoegert-wipper","title":"Högert cotton bump cap Wipper","description":"\u003cp\u003eThe Högert Wipper bump cap combines a cotton outer fabric with an internal protective shell for light knocks and bumps. The outer fabric is made from 100% cotton at 240 g\/m². Ventilation openings and adjustable hook-and-loop fastening complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eBump protection instead of an industrial safety helmet\u003c\/h2\u003e\n\u003cp\u003eThe bump cap is intended for light knocks and bumps in confined working areas. It does not replace an industrial safety helmet where there is a risk from falling objects, heavy impacts, overhead work or falls from height.\u003c\/p\u003e\n\u003ch2\u003eMaterial and fit\u003c\/h2\u003e\n\u003cp\u003eThe outer fabric is made from 100% cotton at 240 g\/m². The hook-and-loop fastening at the back of the head allows the fit to be adjusted. The cap is black and has a standard-length peak.\u003c\/p\u003e\n\u003ch2\u003eVentilation and care\u003c\/h2\u003e\n\u003cp\u003eVentilation openings promote air circulation. Follow the care label; the internal protective shell must not be exposed to high temperatures.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Wipper\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Bump cap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter material:\u003c\/strong\u003e 100% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 240 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective shell:\u003c\/strong\u003e Internal, for light knocks and bumps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Adjustable hook-and-loop fastening at the back of the head\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ventilation openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Standard length\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace an industrial safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for light bumps and does not replace a safety helmet where there is a risk from falling objects or heavy impacts.\u003c\/p\u003e\n\u003ch3\u003eHow is the cap adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe hook-and-loop fastening at the back of the head allows the fit to be adjusted to the head size.\u003c\/p\u003e\n\u003ch3\u003eWhich work areas is the cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eTypical areas include workshops, assembly, storage, manufacturing, technical work, industry and vehicle workshops.\u003c\/p\u003e\n\u003ch3\u003eHow should the cap be cared for?\u003c\/h3\u003e\n\u003cp\u003eFollow the care label and do not expose the internal protective shell to high temperatures.\u003c\/p\u003e\n\u003ch3\u003eWhat colour is the bump cap?\u003c\/h3\u003e\n\u003cp\u003eThe cap is black.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073090462045,"sku":"5418","price":8.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k188jpg-11969198.jpg?v=1782382033"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-kat-arbeitsschutz-sq-750.jpg?v=1789138834","url":"https:\/\/brixoro.eu\/en-it\/collections\/workplace-safety-and-protective-equipment.oembed","provider":"Brixoro","version":"1.0","type":"link"}