{"title":"Cutting discs","description":"\u003cp\u003eA cutting disc is selected for a specific material and a compatible machine. Note the material, machine model, intended disc size and mounting. The permitted operating specifications must also match; the correct diameter alone is not enough.\u003c\/p\u003e\u003ch2\u003ePlan the cut first, then the finishing work\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting through a workpiece:\u003c\/strong\u003e Compare only discs explicitly suitable for the material and intended machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing the cut surface:\u003c\/strong\u003e Choose a tool specifically rated for this work. Approval for cutting alone does not automatically permit grinding with the side of the disc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacing a disc:\u003c\/strong\u003e Use the full machine and disc specifications. Do not choose a replacement just because its colour or visible size looks similar.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExample: cutting a section to length and finishing the surface\u003c\/h2\u003e\u003cp\u003eCutting to length and subsequently working on a surface are two separate tasks. Choosing a disc for the cut should therefore not end with the assumption that the same disc can handle all finishing work. For the second step, compare the appropriate tool and its approved machine compatibility separately.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.klingspor.de\/sortiment\/anwendung\/kronenflex-trennscheiben\"\u003eKlingspor explains cutting disc selection and loading\u003c\/a\u003e. The manufacturer's specifications for the specific discs and machines remain authoritative. Explore further: \u003ca href=\"\/en\/collections\/schneiden-sagen\"\u003eCutting tools and saws\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/schleifen-polieren\"\u003eGrinding and polishing supplies\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"verto-diamanttrennscheibe-180-mm-fuer-beton-und-granit-61h3s8","title":"VERTO diamond cutting disc 180 mm for concrete and granite, 61H3S8","description":"\u003cp\u003eThe VERTO diamond cutting disc 61H3S8 cuts concrete, granite, brick and masonry using dry cutting. Its segmented diamond cutting edge has a 7 mm segment height. The disc has an outside diameter of 180 mm, is 2.0 mm thick and has a 22.2 mm bore.\u003c\/p\u003e\n\u003ch2\u003eCut concrete and natural stone\u003c\/h2\u003e\n\u003cp\u003eThe diamond disc is intended for mineral building materials such as hard concrete, granite, brick and stone. The segmented edge assists removal of material produced during cutting. For visible edges, first test on a piece of scrap to check whether the cut finish suits the workpiece.\u003c\/p\u003e\n\u003ch2\u003eSegmented edge and blade core\u003c\/h2\u003e\n\u003cp\u003eThe sintered diamond coating is mounted on a ground and hardened blade core. Gaps at the cutting edge and openings in the core assist cooling. During dry cutting, observe the specified work intervals and capture dust with a suitable extraction system.\u003c\/p\u003e\n\u003ch2\u003eMatch the angle grinder and disc\u003c\/h2\u003e\n\u003cp\u003eThe machine must be suitable for 180 mm cutting discs with a 22.2 mm bore and for the material being worked. The maximum speed is 8,000 rpm. Also observe the supplied disc’s marking and the machine instructions; a lower permitted limit takes precedence. Use the correct cutting guard.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e VERTO\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 61H3S8\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEAN:\u003c\/strong\u003e 5902062070715\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutside diameter:\u003c\/strong\u003e 180 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e 22.2 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSegment height:\u003c\/strong\u003e 7 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCutting edge:\u003c\/strong\u003e Segmented, sintered diamond coating\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlade core:\u003c\/strong\u003e Ground and hardened, with cooling openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCutting method:\u003c\/strong\u003e Dry cutting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,000 rpm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 13236\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the disc intended for clean visible edges on tiles?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for concrete, granite and other mineral building materials. For sensitive tiles or high requirements for chip-free visible edges, choose a disc suitable for the specific material.\u003c\/p\u003e\n\u003ch3\u003eWill it fit an angle grinder with a 125 mm disc size?\u003c\/h3\u003e\n\u003cp\u003eNo. The machine must explicitly support the 180 mm outside diameter. The same bore alone is insufficient; the guard and fastening must also suit the cutting disc.\u003c\/p\u003e\n\u003ch3\u003eCan I simply add water for cooling during dry cutting?\u003c\/h3\u003e\n\u003cp\u003eUse water only if both the machine and disc are explicitly approved for wet cutting. This disc is specified here for dry cutting; observe cooling pauses and dust extraction instructions.\u003c\/p\u003e\n\u003ch3\u003eCan I grind a concrete edge with the side face?\u003c\/h3\u003e\n\u003cp\u003eThe cutting disc is used with its cutting edge for cutting. Use a suitable grinding cup or another appropriate abrasive tool for surface grinding.\u003c\/p\u003e","brand":"VERTO","offers":[{"title":"Default Title","offer_id":65819472986461,"sku":"657","price":3.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/trennscheibejpg-11940926.jpg?v=1788693213"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-kat-werkzeug-sq-750_3b20373d-5084-4b18-8e7e-1854fc124ecd.jpg?v=1789138963","url":"https:\/\/brixoro.eu\/en-hu\/collections\/cutting-discs.oembed","provider":"Brixoro","version":"1.0","type":"link"}