{"title":"Clamps \u0026 vices","description":"\u003cp\u003eWorkpiece size alone does not determine the right clamping solution. First mark where pressure can be applied and which areas must remain clear for drilling, sawing or joining.\u003c\/p\u003e\u003ch2\u003ePortable and fixed clamping\u003c\/h2\u003e\u003cdiv class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Compare clamps and vices\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRequirement\u003c\/th\u003e\n\u003cth\u003eHow to choose\u003c\/th\u003e\n\u003cth\u003eWhat to measure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHolding components together\u003c\/th\u003e\n\u003ctd\u003eChoose a clamp by opening capacity and throat depth\u003c\/td\u003e\n\u003ctd\u003eOverall dimension plus the distance from the clamping point to the edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRepeatedly holding a workpiece in place\u003c\/th\u003e\n\u003ctd\u003eCompare vices and their intended mounting arrangements\u003c\/td\u003e\n\u003ctd\u003eMounting surface, jaw opening, clear working space\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLong component\u003c\/th\u003e\n\u003ctd\u003ePlan several clamping points\u003c\/td\u003e\n\u003ctd\u003eDistance between supports and clear working area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eExample: gluing two long strips together\u003c\/h2\u003e\u003cp\u003eMark the required pressure points along the strips. Several well-spaced clamps may suit the task better than a single clamp with a large opening capacity. For delicate surfaces, use the protective pads intended for the model.\u003c\/p\u003e\u003ch2\u003eRelated categories\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/zangen-zwingen\"\u003ePliers, clamps and clamping tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/zangen\"\u003ePliers\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"mini-schraubstock-aus-aluminium-360-drehbar-mit-gummierten-backen","title":"Aluminium mini bench vice, 360° swivelling, with rubber-coated jaws","description":"\u003cp\u003eThe mini bench vice holds small workpieces for soldering, model making, precision engineering and repairs. The 360° swivelling turntable allows the working position to be adjusted without clamping the workpiece again. The aluminium housing reduces weight, while the rubber-coated jaws cushion contact with delicate surfaces.\u003c\/p\u003e\n\u003ch2\u003eFlexible positioning\u003c\/h2\u003e\n\u003cp\u003eThe clamped workpiece can be moved into the desired working direction using the swivelling turntable. This makes tasks easier when several sides of a small component need to remain accessible.\u003c\/p\u003e\n\u003ch2\u003eAttachment to the table edge\u003c\/h2\u003e\n\u003cp\u003eThe clamping function allows mounting on a suitable table or workbench edge without drilling into the work surface. Before use, the table thickness and available clamping width must match the vice.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSwivelling function:\u003c\/strong\u003e 360° swivelling\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaws:\u003c\/strong\u003e Rubber-coated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpindle:\u003c\/strong\u003e Steel, fine thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttachment:\u003c\/strong\u003e Clamping function on a table edge\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Compact mini bench vice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat work is the mini bench vice suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for small workpieces during soldering, model making, precision engineering, electronics repairs and similar tasks.\u003c\/p\u003e\n\u003ch3\u003eCan the workpiece be rotated?\u003c\/h3\u003e\n\u003cp\u003eYes, the vice has a 360° swivelling turntable.\u003c\/p\u003e\n\u003ch3\u003eHow is the vice attached?\u003c\/h3\u003e\n\u003cp\u003eIt is attached with the clamping function to a suitable table or workbench edge.\u003c\/p\u003e\n\u003ch3\u003eDo the rubber-coated jaws protect the workpiece?\u003c\/h3\u003e\n\u003cp\u003eThe rubber-coated jaws are designed for gentle contact with delicate surfaces. Suitability depends on the workpiece and clamping force.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"Default Title","offer_id":64595103154525,"sku":"1018","price":15.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940333.jpg?v=1777921049"},{"product_id":"maschinenschraubstock-aus-aluminium-60-mm-backenbreite-68-mm-spannweite","title":"Aluminium machine vice, 60 mm jaw width, 68 mm clamping capacity","description":"\u003cp\u003eThis machine vice holds smaller workpieces in position while drilling, filing or sawing. The 60 mm-wide steel jaws provide a compact clamping surface, while the clamping capacity extends to 68 mm. The aluminium body is lightweight; the upper body can be positioned on the swivel base between 45° and 135°.\u003c\/p\u003e\n\u003ch2\u003eClamping and positioning\u003c\/h2\u003e\n\u003cp\u003eThe steel jaws close via a spindle with a trapezoidal thread. For a different working direction, the clamped body can be rotated on the base and secured with two star-grip screws. This changes the working position without reclamping the workpiece.\u003c\/p\u003e\n\u003ch2\u003eMounting on a workbench\u003c\/h2\u003e\n\u003cp\u003eThe base has four mounting holes for permanent fixing. For mobile use, the vice can alternatively be secured with suitable screw clamps. The aluminium construction makes it easier to move than a heavy cast model.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e 68 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaw height:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSwivel range:\u003c\/strong\u003e 45° to 135°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminium, yellow powder-coated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaws:\u003c\/strong\u003e Steel, screwed on\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpindle:\u003c\/strong\u003e Steel with trapezoidal thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFixing:\u003c\/strong\u003e 2 steel star-grip screws\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e 4 holes in the base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat do 60 mm and 68 mm mean for this vice?\u003c\/h3\u003e\n\u003cp\u003e60 mm is the jaw width. 68 mm is the maximum distance between the jaws and therefore the clamping capacity.\u003c\/p\u003e\n\u003ch3\u003eCan the vice be swivelled?\u003c\/h3\u003e\n\u003cp\u003eYes. The upper body can be positioned on the swivel base between 45° and 135°, then secured.\u003c\/p\u003e\n\u003ch3\u003eHow is the vice mounted?\u003c\/h3\u003e\n\u003cp\u003eFour holes in the base are provided for permanent mounting. For mobile use, it can be secured with suitable screw clamps.\u003c\/p\u003e\n\u003ch3\u003eWhat workpieces fit in it?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for smaller workpieces up to a clamping capacity of 68 mm, provided they rest securely between the steel jaws.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"Default Title","offer_id":65815550067037,"sku":"1378","price":9.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/maschinenschraubstock-12403544.jpg?v=1788694177"},{"product_id":"hoegert-schraubzwinge-15-groessen-von-150-50-bis-1500-120-mm","title":"Högert Screw Clamp, 15 Sizes from 150 × 50 to 1500 × 120 mm","description":"\u003cp\u003eThe Högert screw clamp holds workpieces during gluing, alignment and machining. The movable arm can be positioned roughly on the profiled steel rail; the threaded spindle is then tightened by hand. Plastic caps reduce direct contact between the clamping jaws and workpiece. 15 sizes from 150 × 50 to 1500 × 120 mm are available.\u003c\/p\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eThe screw clamp has a steel profiled rail, a movable arm and a wooden handle. The plastic caps sit between the clamping jaws and workpiece.\u003c\/p\u003e\n\u003ch2\u003eVariants\u003c\/h2\u003e\n\u003cp\u003eThe first measurement is the clamping capacity and the second is the throat depth. Consider the workpiece width, packers and the depth of the required clamping point. Depending on the version, throat depths of 50, 80 or 120 mm are available.\u003c\/p\u003e\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp\u003eTo secure a workpiece, position the jaws, tighten the spindle by hand and check the contact surfaces. Clamping pressure must suit the workpiece and joint.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Screw clamp with profiled rail\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRail:\u003c\/strong\u003e Steel, with cross grooves\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e Wood\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCaps:\u003c\/strong\u003e Plastic, to protect the workpiece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVariants, clamping capacity × throat depth:\u003c\/strong\u003e 150 × 50; 160 × 80; 200 × 80; 250 × 50; 250 × 80; 300 × 80; 300 × 120; 400 × 120; 450 × 80; 500 × 120; 600 × 120; 800 × 120; 1000 × 120; 1200 × 120; 1500 × 120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between clamping capacity and throat depth?\u003c\/h3\u003e\n\u003cp\u003eClamping capacity is the maximum distance between the clamping surfaces. Throat depth describes how far the clamp reaches from the workpiece edge to the clamping point. Both measurements must suit the project.\u003c\/p\u003e\n\u003ch3\u003eHow many screw clamps do I need for gluing?\u003c\/h3\u003e\n\u003cp\u003eThis depends on the workpiece, joint, adhesive and required pressure. Follow the adhesive instructions and distribute the clamps so that the joint closes evenly. There is no universal spacing.\u003c\/p\u003e\n\u003ch3\u003eCan a pressure mark occur despite the plastic cap?\u003c\/h3\u003e\n\u003cp\u003eYes. Excessive pressure or a small contact area can indent soft material. Clean, suitable packers increase the contact area; control the clamping pressure carefully.\u003c\/p\u003e\n\u003ch3\u003eCan I secure wood and metal with the same clamp?\u003c\/h3\u003e\n\u003cp\u003eThe clamp can be used for suitable workpieces made from either material. Check the clamping point and surface, and use suitable packers for sensitive parts. Keep the plastic caps away from strong heat.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"800 x 120 mm","offer_id":65818933592413,"sku":"6082-800-120","price":21.49,"currency_code":"EUR","in_stock":true},{"title":"1200 x 120 mm","offer_id":65818933625181,"sku":"6082-1200-120","price":35.49,"currency_code":"EUR","in_stock":true},{"title":"1500 x 120 mm","offer_id":65818933657949,"sku":"6082-1500-120","price":39.49,"currency_code":"EUR","in_stock":false},{"title":"300 x 120 mm","offer_id":65818931462493,"sku":"6082-300-120","price":16.49,"currency_code":"EUR","in_stock":true},{"title":"400 x 120 mm","offer_id":65818931495261,"sku":"6082-400-120","price":22.49,"currency_code":"EUR","in_stock":false},{"title":"450 x 80 mm","offer_id":65818931528029,"sku":"6082-450-80","price":14.49,"currency_code":"EUR","in_stock":false},{"title":"500 x 120 mm","offer_id":65818931560797,"sku":"6082-500-120-1","price":26.49,"currency_code":"EUR","in_stock":false},{"title":"600 x 120 mm","offer_id":65818931593565,"sku":"6082-600-120","price":26.49,"currency_code":"EUR","in_stock":true},{"title":"160 x 80 mm","offer_id":65818929496413,"sku":"6082-160-80","price":10.99,"currency_code":"EUR","in_stock":false},{"title":"200 x 80 mm","offer_id":65818929529181,"sku":"6082-200-80","price":11.49,"currency_code":"EUR","in_stock":false},{"title":"250 x 50 mm","offer_id":65818929561949,"sku":"6082-250-50","price":5.99,"currency_code":"EUR","in_stock":false},{"title":"250 x 80 mm","offer_id":65818929594717,"sku":"6082-250-80","price":11.49,"currency_code":"EUR","in_stock":false},{"title":"300 x 80 mm","offer_id":65818929627485,"sku":"6082-300-80-1","price":10.49,"currency_code":"EUR","in_stock":true},{"title":"150 x 50 mm","offer_id":65818927137117,"sku":"6082-150-50","price":5.49,"currency_code":"EUR","in_stock":false},{"title":"1000 x 120 mm","offer_id":65817705152861,"sku":"6082-1000-120","price":30.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht3b902jpg-12408112.jpg?v=1788701484"},{"product_id":"aluminium-winkelschraubstock-90-mit-schnelloeffner","title":"Aluminium 90° angle vice with quick-release","description":"\u003cp\u003eThis angle vice holds two workpieces at a fixed 90° angle, for example when gluing frames or carrying out assembly work. The clamping jaws can be adjusted quickly using the quick-release. With a 65 mm clamping capacity, 70 mm jaw width and a die-cast aluminium body, it is suitable for various workshop and model-making tasks.\u003c\/p\u003e\n\u003ch2\u003eAlign and clamp at right angles\u003c\/h2\u003e\n\u003cp\u003eThe fixed 90° position supports the alignment of corners and frames during joining. The 70 mm-wide clamping surface distributes pressure over a larger area. The clamp is suitable for workpieces up to the specified 65 mm clamping capacity.\u003c\/p\u003e\n\u003ch2\u003eQuick-release and assembly\u003c\/h2\u003e\n\u003cp\u003ePressing the button quickly releases the jaws for inserting or removing the workpiece. The angle vice can be used on an existing vice or directly on the workpiece.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAngle position:\u003c\/strong\u003e Fixed 90°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 65 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Cast aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eQuick-release:\u003c\/strong\u003e Button-operated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e On a vice or directly on the workpiece\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 900 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Wood, metal, plastic, model-making and assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat workpiece thickness can the clamp accommodate?\u003c\/h3\u003e\n\u003cp\u003eThe maximum specified clamping capacity is 65 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat angle does the angle vice hold?\u003c\/h3\u003e\n\u003cp\u003eThe tool is designed for a fixed angle of 90°.\u003c\/p\u003e\n\u003ch3\u003eHow are the jaws adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe quick-release is operated by pressing the button, allowing rapid adjustment of the clamping jaws.\u003c\/p\u003e\n\u003ch3\u003eCan the angle vice be used directly on the workpiece?\u003c\/h3\u003e\n\u003cp\u003eYes. In addition to use on a vice, it is also intended for direct use on the workpiece.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"Default Title","offer_id":65819481768285,"sku":"1769","price":15.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersstevepicturesarbeittopexwinkelschraubstockjpg-12403833.jpg?v=1788694572"},{"product_id":"schraubzwinge-nach-din-5117-mit-verzinkter-profilschiene","title":"Screw clamp to DIN 5117 with galvanised profiled rail","description":"\u003cp\u003eThis screw clamp secures workpieces during joinery, metalworking and DIY tasks. The galvanised ribbed profiled rail helps the sliding arm hold its position. Plastic covers on the clamping surfaces can reduce scratches and pressure marks, while the moving pressure plate adapts its contact to the workpiece.\u003c\/p\u003e\n\u003ch2\u003eDesign for controlled clamping\u003c\/h2\u003e\n\u003cp\u003eThe steel construction consists of a profiled rail, spindle and fixed jaw. A moving pressure plate distributes the force across the contact surface. The painted wooden handle enables manual tightening of the spindle.\u003c\/p\u003e\n\u003ch2\u003eChoose the right size\u003c\/h2\u003e\n\u003cp\u003eVariants are available from 50 × 150 mm to 120 × 1500 mm. Smaller throat depths suit narrow strips and craft work; larger versions provide more clamping span for panels and wide workpieces.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 5117\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRail:\u003c\/strong\u003e Galvanised ribbed profiled rail\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpindle:\u003c\/strong\u003e Steel with trapezoidal thread\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure plate:\u003c\/strong\u003e Moving, with plastic cover\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFixed jaw:\u003c\/strong\u003e Steel, with plastic cover\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e Painted wood, ergonomic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvailable sizes:\u003c\/strong\u003e 50 × 150, 50 × 250, 80 × 300, 120 × 300, 120 × 500, 120 × 800, 120 × 1000 and 120 × 1500 mm; throat depth × clamping span\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich sizes are available?\u003c\/h3\u003e\n\u003cp\u003eAvailable sizes are 50 × 150, 50 × 250, 80 × 300, 120 × 300, 120 × 500, 120 × 800, 120 × 1000 and 120 × 1500 mm. The dimensions are given as throat depth × clamping span.\u003c\/p\u003e\n\u003ch3\u003eDo the clamping surfaces protect the workpiece?\u003c\/h3\u003e\n\u003cp\u003eThe pressure plate and fixed jaw have plastic covers that can reduce scratches and pressure marks.\u003c\/p\u003e\n\u003ch3\u003eWhat is the ribbing on the profiled rail for?\u003c\/h3\u003e\n\u003cp\u003eThe ribbing helps the sliding arm hold on the profiled rail and counteracts unintended slipping.\u003c\/p\u003e\n\u003ch3\u003eWhat work is the screw clamp suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for securing workpieces during joinery, metalworking, welding, carpentry and DIY work.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"120 x 500mm","offer_id":65834883678557,"sku":"1873-120x500","price":13.99,"currency_code":"EUR","in_stock":true},{"title":"120 x 800mm","offer_id":65834883711325,"sku":"1873-120x800","price":16.49,"currency_code":"EUR","in_stock":true},{"title":"120 x 1500mm","offer_id":65834883744093,"sku":"1873-120x1500","price":36.99,"currency_code":"EUR","in_stock":true},{"title":"50 x 150mm","offer_id":65834882367837,"sku":"1873-50x150","price":2.99,"currency_code":"EUR","in_stock":false},{"title":"50 x 250mm","offer_id":65834882400605,"sku":"1873-50x250","price":3.99,"currency_code":"EUR","in_stock":true},{"title":"80 x 300mm","offer_id":65834882433373,"sku":"1873-80x300","price":6.99,"currency_code":"EUR","in_stock":true},{"title":"120 x 300mm","offer_id":65834882466141,"sku":"1873-120 x300","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"120 x 1000mm","offer_id":65833776873821,"sku":"1873-120x1000","price":18.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/chatgpt-image-jan-12-2026-111303-ampng-12403905.png?v=1788723774"},{"product_id":"einhandzwinge-mit-70-kg-spannkraft-quickrelease-und-150900-mm-laenge","title":"One-handed clamp, 70 kg clamping force, Quickrelease, 150–900 mm","description":"\u003cp\u003eThis one-handed clamp holds workpieces during gluing, sawing, furniture making or frame work. The pistol grip allows one-handed clamping. Press the operating button to release the clamp quickly. Reversible jaws also allow the clamp to be used for spreading.\u003c\/p\u003e\n\u003ch2\u003eClamping and spreading with one hand\u003c\/h2\u003e\n\u003cp\u003eThe jaws can be used in two working directions: clamping presses workpieces together, while spreading holds them apart. The Quickrelease mechanism releases the clamp at the press of a button and makes frequent repositioning easier.\u003c\/p\u003e\n\u003ch2\u003eDesigned to protect workpieces\u003c\/h2\u003e\n\u003cp\u003eThe powder-coated steel rail provides stable guidance. Plastic jaws can reduce pressure marks on more delicate surfaces. For very soft wood, an additional protective layer can be used.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 70 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e One-handed operation with pistol grip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e Clamping and spreading\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLengths:\u003c\/strong\u003e 150–900 mm, 7 lengths available\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRail:\u003c\/strong\u003e Powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaws:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRelease mechanism:\u003c\/strong\u003e Quickrelease via operating button\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e Plastic pistol grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the clamp also be used for spreading?\u003c\/h3\u003e\n\u003cp\u003eYes. The jaws can be reversed to hold workpieces apart.\u003c\/p\u003e\n\u003ch3\u003eHow is the clamp released?\u003c\/h3\u003e\n\u003cp\u003eOperate the Quickrelease mechanism using the operating button to release the clamping pressure.\u003c\/p\u003e\n\u003ch3\u003eWhich length is suitable for larger workpieces?\u003c\/h3\u003e\n\u003cp\u003eDepending on the clamping span, lengths from 600 to 900 mm are suitable for frames, furniture and larger workpieces.\u003c\/p\u003e\n\u003ch3\u003eDo the jaws protect delicate surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe plastic jaws can reduce the risk of pressure marks. An additional protective layer is recommended for particularly delicate or soft surfaces.\u003c\/p\u003e","brand":"TOPEX","offers":[{"title":"750 x 60mm","offer_id":65834879943005,"sku":"2056-750x60","price":7.99,"currency_code":"EUR","in_stock":true},{"title":"900 x 60mm","offer_id":65834879975773,"sku":"2056-900x60","price":6.99,"currency_code":"EUR","in_stock":true},{"title":"150 x 60mm","offer_id":65833787457885,"sku":"2056-150x60","price":4.49,"currency_code":"EUR","in_stock":true},{"title":"200 x 60mm","offer_id":65834879680861,"sku":"2056-200x60","price":4.99,"currency_code":"EUR","in_stock":true},{"title":"300 x 60mm","offer_id":65834879713629,"sku":"2056-300x60","price":5.49,"currency_code":"EUR","in_stock":true},{"title":"450 x 60mm","offer_id":65834879746397,"sku":"2056-450x60","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"600 x 60mm","offer_id":65834879779165,"sku":"2056-600x60","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/cusersarbeitsbedarf24picturesbildertopexschraubzwingejpg-12404459.jpg?v=1788724778"},{"product_id":"hoegert-eckspanner-winkelschraubstock-90-75-mm-backenbreite","title":"Högert Corner Clamp \/ Angle Vice 90°, 75 mm Jaw Width","description":"\u003cp\u003eThe Högert HT3B960 corner clamp holds two workpieces at a right angle while they are glued, screwed or nailed. The angle vice has a cast aluminium body, 75 mm-wide jaws and a maximum clamping range of 65 mm. It can be secured to a workbench.\u003c\/p\u003e\n\u003ch2\u003eAlign frames and corner joints\u003c\/h2\u003e\n\u003cp\u003ePlace the workpieces against the intended contact surfaces and pre-clamp them. Check the angle and joint line before completing the connection. The angle clamp makes holding easier; it does not replace checking the dimensions of the workpiece.\u003c\/p\u003e\n\u003ch2\u003eDistinguish clamping range from jaw width\u003c\/h2\u003e\n\u003cp\u003eThe maximum clamping range is 65 mm. The 75 mm jaw width is a different measurement and does not increase this range. Allow for the remaining space when using additional protective pads.\u003c\/p\u003e\n\u003ch2\u003eWork at the bench\u003c\/h2\u003e\n\u003cp\u003eSecure the corner clamp to a suitable surface and support long workpieces separately. Clean contact surfaces and suitable packers help prevent pressure marks on sensitive wood or coated parts.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e HT3B960\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Angle vice for 90° joints\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Cast aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 75 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum clamping range:\u003c\/strong\u003e 65 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I clamp workpieces 75 mm thick?\u003c\/h3\u003e\n\u003cp\u003e75 mm is the jaw width. The maximum clamping range is 65 mm; additional packers also require space.\u003c\/p\u003e\n\u003ch3\u003eDo I still need to check the right angle?\u003c\/h3\u003e\n\u003cp\u003eYes. The workpieces must sit correctly. Check the angle and joint before final gluing or screwing, particularly with uneven or differently thick parts.\u003c\/p\u003e\n\u003ch3\u003eCan I attach the angle clamp to a workbench?\u003c\/h3\u003e\n\u003cp\u003eYes. The HT3B960 is suitable for attachment to a workbench. Support long workpieces separately so that they cannot tip the clamp.\u003c\/p\u003e\n\u003ch3\u003eIs this corner clamp intended as a welding vice?\u003c\/h3\u003e\n\u003cp\u003eIts stated applications are gluing, screwing and nailing components. For work involving intense heat, choose a clamping tool designed for that purpose.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65834424009053,"sku":"6089","price":16.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht3b960jpg-12408117.jpg?v=1788732529"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-kat-werkzeug-sq-750_fa956c9c-a407-4510-a213-70d8f309f047.jpg?v=1789139018","url":"https:\/\/brixoro.eu\/en-dk\/collections\/clamps-and-vices.oembed","provider":"Brixoro","version":"1.0","type":"link"}