{"title":"Safety helmets \u0026 bump caps","description":"\u003cp\u003eSafety helmets and bump caps serve different purposes. Choose the type required for your workplace and make sure the head circumference, adjustment and additional accessories work together.\u003c\/p\u003e\u003ch2\u003eHow to narrow down your choice\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify the type of hazard:\u003c\/strong\u003e Bumping into a fixed object is a different impact from being struck by a falling object. This determines whether you need a bump cap or a suitable safety helmet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare size range and fit:\u003c\/strong\u003e Head circumference, internal harness and adjustment should work together. Consider your posture when bending down and the space needed for other equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose accessories as a system:\u003c\/strong\u003e The specified attachments and combinations are essential for hearing protection, visors and chin straps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan use and storage:\u003c\/strong\u003e Read the service life and replacement instructions. Colour and shell appearance tell you nothing about electrical properties or special temperature ranges.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eWhat type of head protection is needed?\u003c\/h2\u003e\u003cdiv class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"What type of head protection is needed?\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhen should you consider it?\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKey comparison\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBump cap\u003c\/th\u003e\n\u003ctd\u003eFor impacts against hard, fixed objects during its intended use\u003c\/td\u003e\n\u003ctd\u003eIt does not replace a safety helmet for protection against falling objects.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIndustrial safety helmet\u003c\/th\u003e\n\u003ctd\u003eWhen protection against the mechanical hazards it is designed for is required\u003c\/td\u003e\n\u003ctd\u003eCompare the marking, size range and special requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHelmet accessories\u003c\/th\u003e\n\u003ctd\u003eWhen a visor or hearing protection is needed at the same time\u003c\/td\u003e\n\u003ctd\u003eThe approved combination of helmet, mount and accessory matters, not just a slot that fits.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently asked questions before buying\u003c\/h2\u003e\u003ch3\u003eIs a bump cap sufficient for every task involving an impact risk?\u003c\/h3\u003e\u003cp\u003eNo. It is not a substitute for a safety helmet where falling objects pose a risk. The type of hazard takes priority over comfort and appearance.\u003c\/p\u003e\u003ch3\u003eCan I simply continue using my existing hearing protection on a new helmet?\u003c\/h3\u003e\u003cp\u003eOnly if the combination is specified for use together. Have the exact designations of the helmet, adapter and hearing protection ready when comparing. Similar mounts are not sufficient evidence of compatibility.\u003c\/p\u003e\u003ch3\u003eCan an undamaged shell tell me how much service life remains?\u003c\/h3\u003e\u003cp\u003eVisual inspection alone cannot answer this. Follow the manufacturer's information on service life, storage and events that require replacement.\u003c\/p\u003e\u003ch2\u003eRelated categories to explore\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/arbeitsschutz\"\u003eWorkplace safety\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/gehorschutz\"\u003eHearing protection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/schutzbrillen-visiere\"\u003eSafety glasses and visors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTechnical reference: \u003ca href=\"https:\/\/www.dguv.de\/fb-psa\/fragen-und-antworten\/faq-kopfschutz\/index.jsp\"\u003eDGUV: Questions about head protection\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"tams-bauhelm-mit-drehverschluss-en-397-en-50365-5361-cm","title":"TAMS safety helmet with wheel ratchet, EN 397 \/ EN 50365, 53–61 cm","description":"\u003cp\u003eThe TAMS safety helmet combines an HDPE shell with a six-point suspension. Use the wheel ratchet to adjust the head size from 53 to 61 cm. Three height positions and a fabric-covered sweatband allow adjustment to the head. Weighing 322 g, the helmet complies with EN 397 and EN 50365, class 0.\u003c\/p\u003e\n\u003ch2\u003eAdjusting the fit and wearing height\u003c\/h2\u003e\n\u003cp\u003eAdjust the head size and suspension height so that the helmet sits securely without pressure. The six attachment points connect the suspension to the shell. Keep the intended space between the head and shell clear and do not store objects in it.\u003c\/p\u003e\n\u003ch2\u003eMechanical and electrical head protection\u003c\/h2\u003e\n\u003cp\u003eEN 397 concerns the industrial safety helmet. The model is also specified to EN 50365 as a class 0 electrically insulating helmet for installations up to 1,000 V AC or 1,500 V DC. It is part of the protective equipment appropriate for the work and does not alone protect the whole body from electrical hazards.\u003c\/p\u003e\n\u003ch2\u003eAccessories and temperature range\u003c\/h2\u003e\n\u003cp\u003eThe helmet has a 30 mm accessory slot. Accessories must be expressly suitable for use with this helmet; slot width alone is not sufficient. The stated operating temperature range is −20 to +50 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnchor points:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 322 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wheel ratchet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e Adjustable in three height positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlot:\u003c\/strong\u003e 30 mm accessory slot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0; installations up to 1,000 V AC \/ 1,500 V DC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -20 to +50 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSweatband:\u003c\/strong\u003e Fabric-covered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the helmet to my head?\u003c\/h3\u003e\n\u003cp\u003eUse the wheel ratchet to adjust the head size. The range is 53 to 61 cm. Three height positions are also available. The helmet should remain secure when you tilt your head, without pressure points.\u003c\/p\u003e\n\u003ch3\u003eWill every accessory with a 30 mm mount fit?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount width only describes the mechanical size. Ear defenders, visors and other accessories must be suitable for use with this helmet and fitted according to the relevant instructions.\u003c\/p\u003e\n\u003ch3\u003eIs EN 397 sufficient evidence of electrical insulation?\u003c\/h3\u003e\n\u003cp\u003eNo. This helmet additionally specifies EN 50365, class 0, for that purpose. The suitability of the complete protective equipment and working method must match the electrical hazard.\u003c\/p\u003e\n\u003ch3\u003eMust I replace the helmet after a strong impact?\u003c\/h3\u003e\n\u003cp\u003eYes. Remove the helmet from service after a significant blow or impact, even if no external damage is visible. Otherwise, assess service life and replacement intervals using the manufacturer’s instructions and helmet marking.\u003c\/p\u003e\n\u003ch3\u003eHow should I store the safety helmet after work?\u003c\/h3\u003e\n\u003cp\u003eStore it clean and dry, protected from unnecessary heat and direct sunlight. Do not apply solvents or unauthorised paints or adhesives to the shell. Check the shell, suspension and fastenings before use.\u003c\/p\u003e","brand":"TAMS","offers":[{"title":"White","offer_id":64339100172637,"sku":"9158-w","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":64339095519581,"sku":"9158-ge","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":64339096764765,"sku":"9158-gr","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":64339100041565,"sku":"9158-r","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":64339095978333,"sku":"9158-g","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":64339099976029,"sku":"9158-o","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":64339095585117,"sku":"9158-b","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/yellow-23jpg-11821674.jpg?v=1777037361"},{"product_id":"schutzhelm-hoegert-diemel-fuer-grosse-hoehen","title":"Högert Diemel industrial safety helmet with chin strap","description":"\u003cp\u003eThe Högert Diemel industrial safety helmet has an ABS shell, 6-point webbing and a chin strap. The width is adjusted using a twist knob. A short peak, ventilation openings and holders for accessories complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eFit and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe 6-point webbing supports the helmet’s fit. The size is adjusted using the twist knob. A chin strap complements the retention system.\u003c\/p\u003e\n\u003ch2\u003eShell and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe helmet shell is made of ABS. Ventilation openings support air circulation; the short peak leaves the field of vision largely unobstructed.\u003c\/p\u003e\n\u003ch2\u003eAccessory holders\u003c\/h2\u003e\n\u003cp\u003eThe holders provided are intended for a visor, safety glasses, ear defenders and a headlamp.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Diemel HT5K197\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 397:2012 + A1:2012\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShell:\u003c\/strong\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetention system:\u003c\/strong\u003e 6-point webbing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChin strap:\u003c\/strong\u003e Present\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Short\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Openings in the upper helmet area\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessory holder:\u003c\/strong\u003e For visor, safety glasses, ear defenders and headlamp\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour selection:\u003c\/strong\u003e White, neon yellow or orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional marking:\u003c\/strong\u003e MM: molten metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich standard is specified for the helmet?\u003c\/h3\u003e\n\u003cp\u003eEN 397:2012 + A1:2012 is specified for the Diemel HT5K197.\u003c\/p\u003e\n\u003ch3\u003eHow is the size adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe size is adjusted using a twist knob.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories can be attached?\u003c\/h3\u003e\n\u003cp\u003eThe holders are intended for a visor, safety glasses, ear defenders and a headlamp.\u003c\/p\u003e\n\u003ch3\u003eIs the helmet fall protection?\u003c\/h3\u003e\n\u003cp\u003eNo. A safety helmet does not replace measures and equipment for work involving a risk of falling.\u003c\/p\u003e\n\u003ch3\u003eWhich colours is the helmet available in?\u003c\/h3\u003e\n\u003cp\u003eWhite, neon yellow and orange are specified.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"White","offer_id":65072894607709,"sku":"9236-w","price":23.49,"currency_code":"EUR","in_stock":false},{"title":"Neon Yellow","offer_id":65072848240989,"sku":"9236-g","price":20.99,"currency_code":"EUR","in_stock":false},{"title":"Orange","offer_id":65072894574941,"sku":"9236-o","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k197jpg-11970163.jpg?v=1782399553"},{"product_id":"climax-bauhelm-mit-6-punkt-aufhaengung-en-397-und-en-50365","title":"Climax safety helmet with 6-point suspension, EN 397 and EN 50365","description":"\u003cp\u003eThe Climax safety helmet provides industrial protection according to EN 397 and electrical insulation according to EN 50365. The polyethylene shell is supported by a 6-point suspension. The moisture-absorbing sweatband and headband extending well into the nape support the fit. 30 mm accessory slots are provided for compatible headband ear defenders or visor holders.\u003c\/p\u003e\n\u003ch2\u003eProtection and equipment\u003c\/h2\u003e\n\u003cp\u003eEN 397 covers mechanical industrial protection, including protection against impact and penetration. Electrical class 0 under EN 50365 is intended for systems up to 1,000 V AC or 1,500 V DC. The helmet is only one part of the required protective equipment. The separate 440 V AC marking under EN 397 must not be confused with this; it is not authorisation for live working.\u003c\/p\u003e\n\u003ch2\u003eAccessories and variants\u003c\/h2\u003e\n\u003cp\u003eSuitable accessories such as behind-the-head ear defenders or a visor holder can be attached through the 30 mm slots. The helmet is available in seven colours; colour selection may support workplace identification but does not replace individual workplace procedures.\u003c\/p\u003e\n\u003ch2\u003eFit and pre-use inspection\u003c\/h2\u003e\n\u003cp\u003eThe headband adjusts from 53 to 61 cm. The helmet weighs approximately 340 g and is designed for temperatures down to −10 °C. Before use, inspect the shell, internal equipment and fastenings. Replace the helmet after a significant impact, even if no external cracks are visible.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0: up to 1,000 V AC \/ 1,500 V DC; 440 V AC is a separate EN 397 marking\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e Polyethylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInternal equipment:\u003c\/strong\u003e 6-point plastic suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 340 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCold resistance:\u003c\/strong\u003e Down to −10 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAccessory interface:\u003c\/strong\u003e 30 mm slots\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Sweatband, headband extending well into the nape and rain gutter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e 7 variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat head circumference is the helmet suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe headband adjusts for a head circumference of 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhat do EN 397 and EN 50365 mean for this safety helmet?\u003c\/h3\u003e\n\u003cp\u003eEN 397 describes an industrial safety helmet for mechanical hazards. EN 50365 concerns electrical insulation; class 0 applies to systems up to 1,000 V AC or 1,500 V DC. The helmet alone does not make work on live parts safe. The required working method and additional protective equipment are also necessary.\u003c\/p\u003e\n\u003ch3\u003eCan accessories be attached to the helmet?\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm slots are intended for suitable helmet-mounted ear defenders and visor holders.\u003c\/p\u003e\n\u003ch3\u003eDown to what temperature is the shell cold-resistant?\u003c\/h3\u003e\n\u003cp\u003eThe shell is designed for temperatures down to −10 °C. This is not a general guarantee against breakage. Use only suitable winter equipment that does not impair the fit.\u003c\/p\u003e\n\u003ch3\u003eWhen must the safety helmet be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace it immediately after a significant impact or if there are cracks or damaged internal equipment. Also follow the periods stated in the supplied manufacturer’s instructions; use, UV exposure, chemicals and storage affect service life. The manufacturing date on the helmet helps with checks.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"blue","offer_id":65072857547101,"sku":"121","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":65815617405277,"sku":"493","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65812133970269,"sku":"122","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"yellow","offer_id":65815617339741,"sku":"492","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65815617372509,"sku":"494","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"grey","offer_id":65815426597213,"sku":"2945","price":3.49,"currency_code":"EUR","in_stock":true},{"title":"orange","offer_id":65812267598173,"sku":"3477-o","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/bauhelm-gelbjpg-11968897.jpg?v=1782380738"},{"product_id":"bauhelm-drehverschluss","title":"Climax construction and industrial safety helmet with rotary adjustment","description":"\u003cp\u003eThe Climax safety helmet has a polyethylene shell, a 6-point plastic suspension and a rotary adjustment for head sizes from 53 to 61 cm. A sweatband, rain gutter and 30 mm accessory slots complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eFit and equipment\u003c\/h2\u003e\n\u003cp\u003eThe head size can be adjusted from 53 to 61 cm using the rotary adjustment. The headband extends to the nape; a sweatband, rain gutter and 30 mm accessory slots for compatible accessories are included.\u003c\/p\u003e\n\u003ch2\u003eStandards and use\u003c\/h2\u003e\n\u003cp\u003eEN 397 and EN 50365 are specified as standards. Use the helmet according to its marking, instructions for use and the specific work requirements. Accessories must be suitable for this helmet design.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyethylene (PE) shell; 6-point plastic suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 330 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e Cold-resistant down to −10 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Rotary adjustment, continuously adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Headband extending to the nape, sweatband, rain gutter and 30 mm accessory slots\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e White, yellow, red, blue, green, grey and orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the head size?\u003c\/h3\u003e\n\u003cp\u003ePut on the helmet and adjust the rotary fastening at the back of the head so that the headband is stable and comfortable. The adjustment range is 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit in the slots?\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm slots are intended for compatible helmet accessories such as earmuffs and visor mounts. Use only accessories suitable for this specific helmet design.\u003c\/p\u003e\n\u003ch3\u003eCan the helmet be used after an impact?\u003c\/h3\u003e\n\u003cp\u003eAfter a strong impact, the helmet should be taken out of use, even if there is no visible damage. Check the shell and suspension regularly.\u003c\/p\u003e\n\u003ch3\u003eIs the helmet suitable for cold temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe stated cold resistance extends down to −10 °C.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"yellow","offer_id":65815317086557,"sku":"4733-ge","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":65815317119325,"sku":"4733-g","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"grey","offer_id":65815317152093,"sku":"4733-gr","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65815317184861,"sku":"4733-r","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65815317217629,"sku":"4733-w","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"orange","offer_id":65072908697949,"sku":"4733-o","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"blue","offer_id":65072859513181,"sku":"4733-b","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/blaujpg-11969091.jpg?v=1782381543"},{"product_id":"tams-bauhelm-en-397-en-50365-5361-cm","title":"TAMS safety helmet EN 397 \/ EN 50365, 53–61 cm","description":"\u003cp\u003eThe TAMS safety helmet combines an HDPE shell with a six-point suspension. The head size adjusts from 53 to 61 cm. Three height positions and a fabric-covered sweatband allow adjustment to the head. Weighing 322 g, the helmet complies with EN 397 and EN 50365, class 0.\u003c\/p\u003e\n\u003ch2\u003eAdjusting the fit and wearing height\u003c\/h2\u003e\n\u003cp\u003eAdjust the head size and suspension height so that the helmet sits securely without pressure. The six attachment points connect the suspension to the shell. Keep the intended space between the head and shell clear and do not store objects in it.\u003c\/p\u003e\n\u003ch2\u003eMechanical and electrical head protection\u003c\/h2\u003e\n\u003cp\u003eEN 397 concerns the industrial safety helmet. The model is also specified to EN 50365 as a class 0 electrically insulating helmet for installations up to 1,000 V AC or 1,500 V DC. It is part of the protective equipment appropriate for the work and does not alone protect the whole body from electrical hazards.\u003c\/p\u003e\n\u003ch2\u003eAccessories and temperature range\u003c\/h2\u003e\n\u003cp\u003eThe helmet has a 30 mm accessory slot. Accessories must be expressly suitable for use with this helmet; slot width alone is not sufficient. The stated operating temperature range is −20 to +50 °C.\u003c\/p\u003e\n\u003ch2\u003eAvailable colours\u003c\/h2\u003e\n\u003cp\u003eThis version is available in yellow and white.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e HDPE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnchor points:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 322 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e Adjustable in three height positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlot:\u003c\/strong\u003e 30 mm accessory slot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 397 and EN 50365\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical insulation:\u003c\/strong\u003e EN 50365, class 0; installations up to 1,000 V AC \/ 1,500 V DC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -20 to +50 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSweatband:\u003c\/strong\u003e Fabric-covered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Yellow and white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the helmet to my head?\u003c\/h3\u003e\n\u003cp\u003eAdjust the suspension to your head circumference. The range is 53 to 61 cm. Three height positions are also available. The helmet should remain secure when you tilt your head, without pressure points.\u003c\/p\u003e\n\u003ch3\u003eWill every accessory with a 30 mm mount fit?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount width only describes the mechanical size. Ear defenders, visors and other accessories must be suitable for use with this helmet and fitted according to the relevant instructions.\u003c\/p\u003e\n\u003ch3\u003eIs EN 397 sufficient evidence of electrical insulation?\u003c\/h3\u003e\n\u003cp\u003eNo. This helmet additionally specifies EN 50365, class 0, for that purpose. The suitability of the complete protective equipment and working method must match the electrical hazard.\u003c\/p\u003e\n\u003ch3\u003eMust I replace the helmet after a strong impact?\u003c\/h3\u003e\n\u003cp\u003eYes. Remove the helmet from service after a significant blow or impact, even if no external damage is visible. Otherwise, assess service life and replacement intervals using the manufacturer’s instructions and helmet marking.\u003c\/p\u003e\n\u003ch3\u003eHow should I store the safety helmet after work?\u003c\/h3\u003e\n\u003cp\u003eStore it clean and dry, protected from unnecessary heat and direct sunlight. Do not apply solvents or unauthorised paints or adhesives to the shell. Check the shell, suspension and fastenings before use.\u003c\/p\u003e","brand":"TAMS","offers":[{"title":"White","offer_id":65072916103517,"sku":"9156-w","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":65072916005213,"sku":"9156-gr","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":65072916070749,"sku":"9156-r","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":65072916037981,"sku":"9156-o","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":65072913842525,"sku":"9156-ge","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":65072866853213,"sku":"9156-b","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":65072913809757,"sku":"9156-g","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/white-1jpg-11821747.jpg?v=1777037391"},{"product_id":"oregon-yukon-forsthelm-mit-edelstahl-netzvisier-und-gehoerschutz","title":"Oregon forestry helmet Yukon with stainless steel mesh visor and ear defenders","description":"\u003cp\u003eThe Oregon Yukon combines an impact-resistant helmet shell, a wide lift-up stainless-steel mesh visor and integrated ear defenders. The 6-point harness is adjustable, while six ventilation openings support air circulation.\u003c\/p\u003e\n\u003ch2\u003eHelmet shell and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe helmet shell is made from polypropylene. The adjustable 6-point harness supports fitting to different head shapes and circumferences. Six ventilation openings support air circulation.\u003c\/p\u003e\n\u003ch2\u003eStainless-steel visor\u003c\/h2\u003e\n\u003cp\u003eThe hinged stainless-steel mesh visor covers the face area. The mesh openings allow airflow but do not fully stop fine particles. Select additional eye protection according to the hazard and the markings on the protective equipment.\u003c\/p\u003e\n\u003ch2\u003eEar defenders and 3-in-1 protection\u003c\/h2\u003e\n\u003cp\u003eThe ear defenders have a stated SNR value of 25.9 dB. Head, face and hearing protection are combined in one unit; suitability depends on the markings and the work being carried out.\u003c\/p\u003e\n\u003ch2\u003eUse and storage\u003c\/h2\u003e\n\u003cp\u003eAdjust the internal harness correctly before starting work. The ear-cup cushions must seal against the head; glasses arms or hair, for example, can affect the fit. Store the helmet dry, protected from direct sunlight and without tools placed on it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Oregon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Yukon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e Impact-resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVisor:\u003c\/strong\u003e Wide, stainless steel, lift-up\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHearing protection:\u003c\/strong\u003e Padded ear defenders, SNR 25.9 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e 6 ventilation openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e 3-in-1 protection: head, face and hearing protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Adjustable 6-point harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does an SNR value of 25.9 dB mean?\u003c\/h3\u003e\n\u003cp\u003eSNR is a single-number rating of sound attenuation determined under test conditions. Actual exposure at the ear also depends on the noise and the ear cups’ tight fit. Do not treat the value as a guaranteed deduction from machine noise.\u003c\/p\u003e\n\u003ch3\u003eCan the stainless-steel visor be lifted up?\u003c\/h3\u003e\n\u003cp\u003eYes. When not required, the visor can be lifted upwards, for example during breaks or tasks without saw use.\u003c\/p\u003e\n\u003ch3\u003eDoes the helmet fit different head sizes?\u003c\/h3\u003e\n\u003cp\u003eThe internal harness is adjustable. The six points refer to the harness attachment points in the shell; they are not six size settings. After adjustment, the helmet must sit securely without uncomfortable pressure.\u003c\/p\u003e\n\u003ch3\u003eAre the ear defenders replaceable?\u003c\/h3\u003e\n\u003cp\u003eThe ear cups are intended as wear parts and can be obtained as replacement parts when required. Follow the manufacturer’s information for the correct version.\u003c\/p\u003e\n\u003ch3\u003eIs a matching neck protector available?\u003c\/h3\u003e\n\u003cp\u003eA matching Oregon neck protector is available for the Yukon. It is intended to provide additional rain and sun protection around the neck.\u003c\/p\u003e\n\u003ch3\u003eWhen must the forestry helmet be replaced?\u003c\/h3\u003e\n\u003cp\u003eDo not continue using it after a severe impact or if it is damaged, even if the damage is not initially visible. Also follow the service life and replacement intervals in the manufacturer’s instructions.\u003c\/p\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":65073073389917,"sku":"4603","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/562412-11968963.jpg?v=1782381456"},{"product_id":"anstosskappe-hoegert-wipper","title":"Högert cotton bump cap Wipper","description":"\u003cp\u003eThe Högert Wipper bump cap combines a cotton outer fabric with an internal protective shell for light knocks and bumps. The outer fabric is made from 100% cotton at 240 g\/m². Ventilation openings and adjustable hook-and-loop fastening complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eBump protection instead of an industrial safety helmet\u003c\/h2\u003e\n\u003cp\u003eThe bump cap is intended for light knocks and bumps in confined working areas. It does not replace an industrial safety helmet where there is a risk from falling objects, heavy impacts, overhead work or falls from height.\u003c\/p\u003e\n\u003ch2\u003eMaterial and fit\u003c\/h2\u003e\n\u003cp\u003eThe outer fabric is made from 100% cotton at 240 g\/m². The hook-and-loop fastening at the back of the head allows the fit to be adjusted. The cap is black and has a standard-length peak.\u003c\/p\u003e\n\u003ch2\u003eVentilation and care\u003c\/h2\u003e\n\u003cp\u003eVentilation openings promote air circulation. Follow the care label; the internal protective shell must not be exposed to high temperatures.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand and model:\u003c\/strong\u003e Högert Wipper\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Bump cap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter material:\u003c\/strong\u003e 100% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 240 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective shell:\u003c\/strong\u003e Internal, for light knocks and bumps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Adjustable hook-and-loop fastening at the back of the head\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ventilation openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Standard length\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace an industrial safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for light bumps and does not replace a safety helmet where there is a risk from falling objects or heavy impacts.\u003c\/p\u003e\n\u003ch3\u003eHow is the cap adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe hook-and-loop fastening at the back of the head allows the fit to be adjusted to the head size.\u003c\/p\u003e\n\u003ch3\u003eWhich work areas is the cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eTypical areas include workshops, assembly, storage, manufacturing, technical work, industry and vehicle workshops.\u003c\/p\u003e\n\u003ch3\u003eHow should the cap be cared for?\u003c\/h3\u003e\n\u003cp\u003eFollow the care label and do not expose the internal protective shell to high temperatures.\u003c\/p\u003e\n\u003ch3\u003eWhat colour is the bump cap?\u003c\/h3\u003e\n\u003cp\u003eThe cap is black.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073090462045,"sku":"5418","price":8.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k188jpg-11969198.jpg?v=1782382033"},{"product_id":"oregon-kettensaegen-schutzset-yukon-helm-handschuhe-gr-10-beinlinge","title":"Oregon chainsaw protection set: Yukon helmet, size 10 gloves, leg protectors","description":"\u003cp\u003eThe three-piece Oregon set combines head protection, hearing protection, a pair of cut-resistant gloves and chainsaw leg protectors for chainsaw work. It includes the impact-resistant Yukon helmet with adjustable 6-point harness, stainless-steel mesh visor, integrated ear defenders, and protective equipment for the hands and legs.\u003c\/p\u003e\n\u003ch2\u003eSet components\u003c\/h2\u003e\n\u003cp\u003eThe Yukon helmet combination includes an adjustable 6-point harness, a wide stainless-steel mesh visor and ear defenders with 25.9 dB SNR. The orange leather gloves are supplied as a pair in size 10; chainsaw cut protection is provided on the left hand. The mesh visor is breathable but does not form a sealed barrier against dust.\u003c\/p\u003e\n\u003ch2\u003eLeg protectors worn over work trousers\u003c\/h2\u003e\n\u003cp\u003eThe one-size chainsaw leg protectors are worn over ordinary trousers and protect the front of the legs. Check the fit and freedom of movement before use; the equipment does not replace safe working practices or compliance with the relevant manufacturer’s instructions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Oregon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSet contents:\u003c\/strong\u003e Yukon safety helmet, stainless-steel mesh visor, hearing protection, cut-resistant gloves and chainsaw leg protectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Impact-resistant, adjustable 6-point harness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHearing protection:\u003c\/strong\u003e Integrated ear defenders, 25.9 dB SNR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVisor:\u003c\/strong\u003e Wide, anti-fog stainless-steel mesh\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGloves:\u003c\/strong\u003e One pair of orange leather gloves, size 10; cut protection on the left hand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLeg protectors:\u003c\/strong\u003e One size, cut protection for the front of the legs, suitable for wearing over trousers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the protection set contain?\u003c\/h3\u003e\n\u003cp\u003eIt contains the Yukon safety helmet with stainless-steel mesh visor and integrated hearing protection, cut-resistant gloves and chainsaw leg protectors.\u003c\/p\u003e\n\u003ch3\u003eDoes the cut-resistant glove protect both hands?\u003c\/h3\u003e\n\u003cp\u003eThe cut protection is on the left hand. The gloves are made of leather and supplied in size 10.\u003c\/p\u003e\n\u003ch3\u003eWhat is the hearing protector’s attenuation rating?\u003c\/h3\u003e\n\u003cp\u003eThe SNR value is 25.9 dB. This is a laboratory rating, not a blanket statement that all chainsaw noise will be sufficiently attenuated. Fit, correct positioning, actual noise exposure and duration of use must be considered when selecting protection.\u003c\/p\u003e\n\u003ch3\u003eCan the leg protectors be worn over work trousers?\u003c\/h3\u003e\n\u003cp\u003eYes. They are one size and designed to be worn over ordinary trousers.\u003c\/p\u003e\n\u003ch3\u003eCan the helmet be adjusted?\u003c\/h3\u003e\n\u003cp\u003eYes. The 6-point harness is adjustable.\u003c\/p\u003e\n\u003ch3\u003eDoes this set provide all the protective equipment required?\u003c\/h3\u003e\n\u003cp\u003eThe set covers several areas of protection. Chainsaw work also requires suitable chainsaw protective footwear and any other equipment required for the task. The protection classes and markings of each item must suit the work; no garment replaces safe sawing technique.\u003c\/p\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":65073099833693,"sku":"8602","price":111.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/oregon-3tlg-forstschutz-setjpg-11969269.jpg?v=1782382238"},{"product_id":"hoegert-eger-basecap-leuchtgelb-verstellbar-5761-cm","title":"Högert baseball cap Eger, fluorescent yellow, adjustable 57–61 cm","description":"\u003cp\u003eThe Högert Eger baseball cap stands out with its high-visibility yellow colour and reflective inserts. Six fabric panels form the crown; ventilation openings allow air to circulate. The hook-and-loop fastening at the back adjusts the fit for a head circumference of 57 to 61 cm.\u003c\/p\u003e\n\u003ch2\u003eConstruction and fabric\u003c\/h2\u003e\n\u003cp\u003eThe baseball cap has a six-panel construction. The fabric consists of 60% cotton and 40% polyester at 250 g\/m².\u003c\/p\u003e\n\u003ch2\u003eVisibility in different lighting conditions\u003c\/h2\u003e\n\u003cp\u003eThe high-visibility yellow colour is conspicuous in daylight. Reflective inserts return incident light, such as headlamp beams. They do not emit light themselves and do not replace required high-visibility clothing.\u003c\/p\u003e\n\u003ch2\u003eFit and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe hook-and-loop fastening adjusts the cap for a head circumference of 57–61 cm. Ventilation openings support air circulation.\u003c\/p\u003e\n\u003ch2\u003eCap care\u003c\/h2\u003e\n\u003cp\u003eClean gently at 30 °C according to the care label. Do not use fabric softener, bleach, iron, dry clean or tumble dry. Reshape before storing and allow to dry completely.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e EGER\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Six-panel baseball cap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 60% cotton, 40% polyester\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 250 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReflective inserts:\u003c\/strong\u003e Present\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ventilation openings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 57–61 cm head circumference\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProduct property:\u003c\/strong\u003e Moisture-wicking\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Gentle wash at 30 °C; do not use fabric softener; do not bleach, iron, dry clean or tumble dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the fit?\u003c\/h3\u003e\n\u003cp\u003eRelease the hook-and-loop fastening at the back, put on the cap and adjust the fit. It should sit securely without pressing. The adjustment range is 57 to 61 cm head circumference.\u003c\/p\u003e\n\u003ch3\u003eDo the reflective inserts glow in the dark?\u003c\/h3\u003e\n\u003cp\u003eThey reflect incident light, such as headlamp beams. Without a light source, they do not glow themselves.\u003c\/p\u003e\n\u003ch3\u003eWhat does the six-panel construction mean?\u003c\/h3\u003e\n\u003cp\u003eThe crown is sewn from six individual fabric panels. This describes the cap’s shape, not a hexagonal fabric pattern.\u003c\/p\u003e\n\u003ch3\u003eIs the baseball cap head protection for construction sites?\u003c\/h3\u003e\n\u003cp\u003eIt has no protective shell and replaces neither a safety helmet nor a required bump cap.\u003c\/p\u003e\n\u003ch3\u003eHow do I care for the baseball cap?\u003c\/h3\u003e\n\u003cp\u003eClean gently at 30 °C according to the care label. Do not use fabric softener, bleach, iron, dry clean or tumble dry.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Default Title","offer_id":65073248043357,"sku":"4818","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k178jpg-11968978.jpg?v=1782381611"},{"product_id":"anstosskappe-mit-abs-kunststoffschale-und-eva-daempfung","title":"Bump cap with ABS shell and EVA cushioning","description":"\u003cp\u003eThis baseball-cap-style bump cap is intended for work areas where there is a risk of striking fixed obstacles. An ABS plastic shell and EVA foam form the integrated protective construction. The cotton cover can be removed and washed. The hook-and-loop fastening provides continuous adjustment for a head circumference of 54–59 cm.\u003c\/p\u003e\n\u003ch2\u003eUse bump protection appropriately\u003c\/h2\u003e\n\u003cp\u003eThe cap is intended for contact with pipes, shelving, low passageways and other fixed objects. It does not replace an industrial safety helmet where protection from falling or flying objects is required. Choose head protection according to the specific workplace hazard.\u003c\/p\u003e\n\u003ch2\u003eVentilation and cleaning\u003c\/h2\u003e\n\u003cp\u003eEight ventilation openings—four at the sides and four on top—support air circulation. To clean it, remove the cotton cover from the ABS shell and wash it separately. Keep the shell outside the cover while washing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 812\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter cover:\u003c\/strong\u003e 100% cotton, removable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInner shell:\u003c\/strong\u003e ABS plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCushioning:\u003c\/strong\u003e EVA foam inside and outside\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize range:\u003c\/strong\u003e 54–59 cm head circumference\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e 8 openings, including 4 at the sides and 4 on top\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour options:\u003c\/strong\u003e 9 versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace an industrial safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for impacts against fixed objects. Where there is a risk from falling or flying objects, a suitable industrial safety helmet is required.\u003c\/p\u003e\n\u003ch3\u003eWhat head circumference is the cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe hook-and-loop fastening allows continuous adjustment for a head circumference of 54–59 cm.\u003c\/p\u003e\n\u003ch3\u003eCan the cover be washed?\u003c\/h3\u003e\n\u003cp\u003eYes. The cotton cover is removable and washable. Do not wash the ABS shell with it.\u003c\/p\u003e\n\u003ch3\u003eHow many ventilation openings does the cap have?\u003c\/h3\u003e\n\u003cp\u003eEight in total: four at the sides and four on top.\u003c\/p\u003e\n\u003ch3\u003eWhat is the purpose of the EVA cushioning?\u003c\/h3\u003e\n\u003cp\u003eThe EVA cushioning is positioned inside and outside the ABS shell and helps absorb impacts against fixed obstacles.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"grey","offer_id":65819465482589,"sku":"2029-g","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"black","offer_id":65819465515357,"sku":"2029-s","price":10.99,"currency_code":"EUR","in_stock":false},{"title":"dark blue","offer_id":65819465548125,"sku":"2029-db","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"orange","offer_id":65819465580893,"sku":"2029-o","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"green","offer_id":65819465384285,"sku":"2029-gr","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65819465417053,"sku":"2029-r","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"yellow","offer_id":65819429994845,"sku":"2029-ge","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65819429929309,"sku":"2029-w","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"blue","offer_id":65817590038877,"sku":"2029-b","price":10.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/anstokappe-in-versch-farben-1jpeg-11968355.jpg?v=1788695052"},{"product_id":"climax-tirreno-txr-schutzhelm","title":"Climax safety helmet TIRRENO TXR","description":"\u003cp\u003eThe Climax TIRRENO TXR has an ABS helmet shell, a shortened peak and a Pinnlock system for adjusting head sizes from 52 to 61 cm. A headband and sweatband are included.\u003c\/p\u003e\n\u003ch2\u003eAdjustment and field of vision\u003c\/h2\u003e\n\u003cp\u003eThe Pinnlock system allows adjustment within the range of 52 to 61 cm. The shortened peak can improve upward visibility.\u003c\/p\u003e\n\u003ch2\u003eHelmet shell and features\u003c\/h2\u003e\n\u003cp\u003eThe helmet shell is made of ABS plastic. A padded PVC headband and an antibacterial sweatband complete the features.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Climax TIRRENO TXR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet shell:\u003c\/strong\u003e ABS plastic, UV-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 397\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead size:\u003c\/strong\u003e 52–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Pinnlock system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Shortened\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadband:\u003c\/strong\u003e Flexible PVC with padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSweatband:\u003c\/strong\u003e Antibacterial\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 350 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e −10 °C to +50 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich head sizes is the helmet suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe Pinnlock system can be adjusted for head sizes from 52 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhat advantage does the shortened peak offer?\u003c\/h3\u003e\n\u003cp\u003eThe shortened peak can improve upward visibility, for example during overhead work.\u003c\/p\u003e\n\u003ch3\u003eCan the surface be printed?\u003c\/h3\u003e\n\u003cp\u003ePrinting is only suitable with the manufacturer\u0026#x27;s approval and using appropriate methods.\u003c\/p\u003e\n\u003ch3\u003eHow much does the safety helmet weigh?\u003c\/h3\u003e\n\u003cp\u003eThe stated weight is 350 g.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"green","offer_id":65819442381149,"sku":"2278-gr","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"orange","offer_id":65819442413917,"sku":"2278-o","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65819442250077,"sku":"2278-w","price":8.99,"currency_code":"EUR","in_stock":false},{"title":"blue","offer_id":65817599803741,"sku":"2278-b","price":8.99,"currency_code":"EUR","in_stock":false},{"title":"neon yellow","offer_id":65819442282845,"sku":"2278-g","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":65819442315613,"sku":"2278-r","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schutzhelm-abs-tirreno-txr-1jpeg-11968372_2a7d524f-d75c-43b6-bb35-20e61e3b0cb3.jpg?v=1788695692"},{"product_id":"sicherheits-cap-en-812-anstosskappe","title":"Climax bump cap EN 812 with removable inner shell","description":"\u003cp\u003eThe Climax bump cap is intended for work areas where protection is needed against impacts with fixed objects, but a safety helmet against falling objects is not required. A removable inner shell with foam padding cushions impacts. The hook-and-loop closure can be adjusted for head circumferences of 54 to 59 cm.\u003c\/p\u003e\n\u003ch2\u003eInner shell and ventilation\u003c\/h2\u003e\n\u003cp\u003eDepending on the colour variant, a PE or ABS inner shell with EVA comfort foam insert is provided. Ventilation holes in the inner shell support air circulation. The inner shell can be removed, for example for cleaning or replacement.\u003c\/p\u003e\n\u003ch2\u003eVisibility and size adjustment\u003c\/h2\u003e\n\u003cp\u003eReflective strips on the peak add to visibility in poor light conditions. The cap is adjusted from 54 to 59 cm using the rear hook-and-loop closure. The yellow variant additionally has mesh fabric at the back of the head and reflective strips at the front.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 812:2012\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead circumference:\u003c\/strong\u003e 54–59 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak length:\u003c\/strong\u003e 7 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrey\/red inner shell:\u003c\/strong\u003e PE with protective padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eYellow\/orange inner shell:\u003c\/strong\u003e ABS plastic with protective padding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCushioning:\u003c\/strong\u003e EVA comfort foam insert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrey\/red outer material:\u003c\/strong\u003e 10% polyester, 90% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eYellow\/orange outer material:\u003c\/strong\u003e 35% polyester, 65% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClosure:\u003c\/strong\u003e Hook-and-loop closure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Construction, warehouse work, freight forwarding, mechanical work, road construction\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrey\/red weight:\u003c\/strong\u003e 188 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eYellow\/orange weight:\u003c\/strong\u003e 165 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace a safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for impact protection according to EN 812 and does not protect against falling objects like a safety helmet according to EN 397.\u003c\/p\u003e\n\u003ch3\u003eCan the inner shell be removed?\u003c\/h3\u003e\n\u003cp\u003eYes. The inner shell is removable, for example for cleaning or replacement.\u003c\/p\u003e\n\u003ch3\u003eWhat head circumference is the cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe hook-and-loop closure can be adjusted for a head circumference of 54 to 59 cm.\u003c\/p\u003e\n\u003ch3\u003eWhich inner shell does each colour variant have?\u003c\/h3\u003e\n\u003cp\u003eThe grey\/red version has a PE inner shell, while the yellow\/orange version has an ABS inner shell. The yellow variant also has mesh ventilation at the back of the head.\u003c\/p\u003e\n\u003ch3\u003eHow should the cap be cleaned?\u003c\/h3\u003e\n\u003cp\u003eClean the cap by hand with warm water, then dab it dry with a cloth. Do not machine-wash it.\u003c\/p\u003e\n\u003ch3\u003eDoes the cap still provide impact protection without the inner shell?\u003c\/h3\u003e\n\u003cp\u003eNo. Without the appropriate inner shell, the cap must not be used for impact protection.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"grey\/red","offer_id":65819428454749,"sku":"2452-gr","price":15.99,"currency_code":"EUR","in_stock":false},{"title":"black\/orange","offer_id":65819428356445,"sku":"2452-s","price":15.99,"currency_code":"EUR","in_stock":false},{"title":"yellow","offer_id":65817602949469,"sku":"2452-g","price":15.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/anstokappe-versch-farben-1jpeg-11968504.jpg?v=1788696288"},{"product_id":"hoegert-basecap-klaus-mit-gebogenem-schirm-und-mesh-rueckseite","title":"Högert cap Klaus with curved peak and mesh back","description":"\u003cp\u003eThe Högert Klaus baseball cap combines a curved peak with a breathable mesh back. Two front fabric panels give the cap its shape, while four rear mesh panels allow air to circulate. The hook-and-loop fastening adjusts the fit at the back of the head. Available in blue, light grey and dark grey.\u003c\/p\u003e\n\u003ch2\u003eLightweight work cap with air circulation\u003c\/h2\u003e\n\u003cp\u003eThe front uses TC fabric made from 65 % polyester and 35 % cotton at 190 g\/m². The rear panels are made from polyester mesh. Additional ventilation openings support air exchange. The curved peak shades part of the face and eye area.\u003c\/p\u003e\n\u003ch2\u003eAdjustable fit and reflective strip\u003c\/h2\u003e\n\u003cp\u003eThe hook-and-loop fastening allows continuous adjustment of the one-size fit. A reflective strip on the back reflects incident light. The lightweight work cap is suitable for gardening, warehouses, workshops and leisure use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Högert\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Klaus\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo front panels:\u003c\/strong\u003e TC fabric, 65 % polyester and 35 % cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 190 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRear panels:\u003c\/strong\u003e Four panels made from 100 % polyester mesh\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e Curved\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Continuously adjustable hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReflective detail:\u003c\/strong\u003e Reflective strip on the back\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Blue, light grey or dark grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e Adjustable one size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Mesh back and ventilation openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I adjust the cap correctly?\u003c\/h3\u003e\n\u003cp\u003eOpen the hook-and-loop fastening at the back of the head, adjust the circumference and fully reconnect the hook-and-loop surfaces. The cap should stay in place during movement without pressing.\u003c\/p\u003e\n\u003ch3\u003eWhat does the mesh back do on warm days?\u003c\/h3\u003e\n\u003cp\u003eThe open mesh fabric helps air circulate at the back of the head. However, it cannot prevent sweating or heat build-up in all conditions.\u003c\/p\u003e\n\u003ch3\u003eDoes the reflective strip glow by itself?\u003c\/h3\u003e\n\u003cp\u003eNo. It reflects light, for example from a lamp. The strip does not make the cap certified high-visibility clothing.\u003c\/p\u003e\n\u003ch3\u003eCan I use the baseball cap as head protection?\u003c\/h3\u003e\n\u003cp\u003eIt does not provide the protection of a safety helmet or bump cap. Where suitable head protection is required, designated protective equipment must be worn.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"Light Grey","offer_id":65819169358173,"sku":"4659-Hg","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"Dark Grey","offer_id":65819169390941,"sku":"4659-Dg","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":65817668092253,"sku":"4659-B","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k478jpg-11968962.jpg?v=1788699753"},{"product_id":"portwest-pw59-anstosskappe-mit-abs-innenschale","title":"Portwest bump cap PW59 with ABS inner shell","description":"\u003cp\u003eThe Portwest PW59 provides bump protection to EN 812 in a baseball-cap design. An ABS inner shell and EVA padding sit beneath the cotton cover. The long peak, ventilation openings and adjustable fit complete the design.\u003c\/p\u003e\n\u003ch2\u003eBump protection\u003c\/h2\u003e\n\u003cp\u003eThe cap protects against bumping the head on fixed objects. It does not replace an industrial helmet where there is a risk from falling or thrown objects.\u003c\/p\u003e\n\u003ch2\u003ePeak and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe 7 cm peak provides shade. Ventilation openings with metal eyelets support air circulation. Padded headbands complement the EVA padding.\u003c\/p\u003e\n\u003ch2\u003eAdjustment\u003c\/h2\u003e\n\u003cp\u003eThe one-size fit can be adjusted with the hook-and-loop strap at the back of the head. The cap is available in black, royal blue, navy and grey.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer\/model:\u003c\/strong\u003e Portwest PW59\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection:\u003c\/strong\u003e Bump protection to EN 812\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInner shell:\u003c\/strong\u003e ABS plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePadding:\u003c\/strong\u003e High-density EVA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePeak:\u003c\/strong\u003e 7 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter material:\u003c\/strong\u003e 100% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Hook-and-loop strap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Black, royal blue, navy and grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace an industrial helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for impacts against fixed objects. Where there is a risk from falling objects, a suitable industrial helmet is required.\u003c\/p\u003e\n\u003ch3\u003eHow is the fit adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable one-size fit is changed using the hook-and-loop strap at the back of the head. The cap must sit securely and correctly on the head.\u003c\/p\u003e\n\u003ch3\u003eWhat protective shell is integrated?\u003c\/h3\u003e\n\u003cp\u003eAn ABS inner shell with high-density EVA padding.\u003c\/p\u003e\n\u003ch3\u003eWhat is the 7 cm peak for?\u003c\/h3\u003e\n\u003cp\u003eThe 7 cm peak provides shade and reduces glare.\u003c\/p\u003e\n\u003ch3\u003eWhich colours are available?\u003c\/h3\u003e\n\u003cp\u003eBlack, royal blue, navy and grey.\u003c\/p\u003e","brand":"Portwest","offers":[{"title":"Dark Blue","offer_id":65817700565341,"sku":"8075-Db","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":65818884538717,"sku":"8075-S","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"Royal Blue","offer_id":65818883555677,"sku":"8075-Rb","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":65818883588445,"sku":"8075-G","price":12.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/pw59jpg-11969217.jpg?v=1788701174"},{"product_id":"kappe-hoegert-alf-baseball","title":"Högert cotton baseball cap ALF with hook-and-loop fastening","description":"\u003cp\u003eThe Högert ALF baseball cap complements workwear and casual clothing with a classic six-panel shape. Cotton makes it comfortable for everyday wear. Ventilation openings support comfort, while the integrated sweatband absorbs moisture at the forehead. The fit is adjusted at the back with hook-and-loop fastening.\u003c\/p\u003e\n\u003ch2\u003eClassic six-panel design\u003c\/h2\u003e\n\u003cp\u003eThe six panels give the cap its familiar baseball shape. The curved peak provides shade while keeping the view ahead clear.\u003c\/p\u003e\n\u003ch2\u003eAdjust the fit at the back\u003c\/h2\u003e\n\u003cp\u003eThe hook-and-loop strap adjusts the circumference for the desired fit. The cotton sweatband sits against the forehead, while openings in the crown support ventilation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100 % cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabric weight:\u003c\/strong\u003e 240 g\/m²\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Six panels with sweatband\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Hook-and-loop fastening at the back\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ventilation openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill the cap fit every head?\u003c\/h3\u003e\n\u003cp\u003eThe cap can be adjusted using the hook-and-loop fastening at the back. For a secure fit, adjust it so that it sits comfortably without pressing.\u003c\/p\u003e\n\u003ch3\u003eIs the cap an alternative to a safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a textile baseball cap for everyday wear and light work. Suitable head protection is required for tasks where a safety helmet is prescribed.\u003c\/p\u003e","brand":"Högert","offers":[{"title":"grey","offer_id":65818502725981,"sku":"B2193-g-uni","price":2.99,"currency_code":"EUR","in_stock":true},{"title":"blue","offer_id":65817774195037,"sku":"B2193-b-uni","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ht5k492png-11969423.png?v=1788703321"},{"product_id":"schutzhelm-portwest","title":"Portwest safety helmet PS55 Endurance with ventilation","description":"\u003cp\u003eThe Portwest PS55 Endurance is a ventilated industrial safety helmet with an ABS shell. The 6-point textile suspension and ratchet provide even support and tool-free adjustment.\u003c\/p\u003e\n\u003ch2\u003eVentilated ABS shell\u003c\/h2\u003e\n\u003cp\u003eAir openings support air circulation in warm working conditions. The lateral deformation test is specified by the LD marking within the helmet standard.\u003c\/p\u003e\n\u003ch2\u003eCombine with hearing and face protection\u003c\/h2\u003e\n\u003cp\u003eThe helmet can be combined with the PW47 and PS47 clip-on ear defenders. For a visor, Portwest specifies the PW58 helmet visor holder. Use only a combination approved by the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Portwest\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PS55 Endurance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShell:\u003c\/strong\u003e ABS, ventilated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e 6-point textile\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 397 -30 °C\/+50 °C, LD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the size adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe ratchet can be adjusted to the head circumference with one hand. The helmet must fit securely without causing pressure points.\u003c\/p\u003e\n\u003ch3\u003eCan hearing protection be attached to the helmet?\u003c\/h3\u003e\n\u003cp\u003ePortwest specifies the PW47 and PS47 clip-on ear defenders as compatible accessories. Check the fit of the complete combination before use.\u003c\/p\u003e","brand":"Portwest","offers":[{"title":"White","offer_id":65818258080093,"sku":"B6014-w","price":15.49,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":65817807651165,"sku":"B6014-g","price":15.49,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":65818258014557,"sku":"B6014-o","price":15.49,"currency_code":"EUR","in_stock":true},{"title":"Royal Blue","offer_id":65818258047325,"sku":"B6014-r","price":15.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/ps55yerjpg-11969835.jpg?v=1788707230"},{"product_id":"basecap-grad-mit-reflexstreifen","title":"ART.MAS cotton baseball cap Classic, adjustable","description":"\u003cp\u003eThe ART.MAS Classic baseball cap is made from 100% cotton for work and leisure. Six fabric panels form the crown. A stiffened peak and reinforced front give the cap its shape.\u003c\/p\u003e\n\u003ch2\u003eAdjust the size with the metal buckle\u003c\/h2\u003e\n\u003cp\u003eThe rear fastening allows the one-size cap to be adjusted to the wearer’s head circumference. The metal buckle holds the selected setting.\u003c\/p\u003e\n\u003ch2\u003eCotton with ventilation eyelets\u003c\/h2\u003e\n\u003cp\u003eSewn ventilation openings complement the cotton material. The peak shades the face; the cap works equally well with workwear and casual clothing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 6 panels, stiffened front and peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Adjustable metal buckle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e One size\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN ISO 13688:2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Classic cap have a hook-and-loop fastening?\u003c\/h3\u003e\n\u003cp\u003eNo, the size is adjusted with a metal buckle at the back.\u003c\/p\u003e\n\u003ch3\u003eDoes the cap have ventilation openings?\u003c\/h3\u003e\n\u003cp\u003eYes, the crown has sewn ventilation eyelets.\u003c\/p\u003e","brand":"ART.MAS","offers":[{"title":"Default Title","offer_id":65818328629597,"sku":"B5067","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/b5067-1png-11969824.png?v=1788706524"},{"product_id":"schweisshelm-modell-405-c-polyamid-mit","title":"Climax welding helmet 405 C with welding lens 110 × 90 mm","description":"\u003cp\u003eThe Climax 405 C welding helmet has a shell made from glass-fibre-reinforced polyamide. The contour band and cross strap are adjustable; the replaceable welding glass measures 110 × 90 mm.\u003c\/p\u003e\n\u003ch2\u003eAdjustment and comfort\u003c\/h2\u003e\n\u003cp\u003eThe contour band is adjusted using a wing nut. The cross strap is length-adjustable. Two padded cushions on the contour band complete the equipment.\u003c\/p\u003e\n\u003ch2\u003eHelmet shell and viewing window\u003c\/h2\u003e\n\u003cp\u003eThe glass-fibre-reinforced polyamide shell covers the face and neck. The welding glass, measuring 110 × 90 mm, is replaceable. The appropriate shade level depends on the welding process and current strength.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 405 C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyamide with glass fibre\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 175:1997\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead circumference:\u003c\/strong\u003e 52–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWelding glass:\u003c\/strong\u003e 110 × 90 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 550 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Contour band, length-adjustable cross strap, two padded cushions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Spain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat head size can be adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe head circumference can be adjusted from 52 to 61 cm using the contour band. The cross strap is also length-adjustable.\u003c\/p\u003e\n\u003ch3\u003eHow large is the welding glass?\u003c\/h3\u003e\n\u003cp\u003eThe welding glass measures 110 × 90 mm and is replaceable.\u003c\/p\u003e\n\u003ch3\u003eWhich areas does the helmet cover?\u003c\/h3\u003e\n\u003cp\u003eThe helmet shell is shaped to cover the face and neck. Any additional protective equipment required depends on the welding work being carried out.\u003c\/p\u003e\n\u003ch3\u003eHow is the appropriate welding glass selected?\u003c\/h3\u003e\n\u003cp\u003eThe shade level depends on the welding process and current strength. Use suitable filters and follow the manufacturer\u0026#x27;s information.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":65819380613469,"sku":"2453","price":11.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/schweihelmjpg-11968505.jpg?v=1788696314"},{"product_id":"kinnriemen-fuer-schutzhelme-2-punkt-polyamid-ca-25-mm","title":"Chin strap for safety helmets, 2-point, polyamide, approx. 25 mm","description":"\u003cp\u003eThe 2-point chin strap is intended for compatible industrial safety helmets with the appropriate attachment points. The polyamide webbing runs under the chin and can be adjusted continuously. A foam pad supports wearing comfort; the buckle is designed as a breakaway point with a stated release at approximately 150 N.\u003c\/p\u003e\n\u003ch2\u003eAttachment and adjustment\u003c\/h2\u003e\n\u003cp\u003eThe strap is attached on both sides at the helmet rim and runs under the chin. The length can be adjusted using the slide buckle; the strap should fit securely without uncomfortable pressure.\u003c\/p\u003e\n\u003ch2\u003eSafety buckle\u003c\/h2\u003e\n\u003cp\u003eThe plastic buckle opens under a tensile load of approximately 150 N. This allows the strap to open when subjected to the corresponding load.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e 2-point strap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWebbing:\u003c\/strong\u003e Polyamide, approx. 25 mm wide\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChin pad:\u003c\/strong\u003e Foam (PU)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuckle:\u003c\/strong\u003e Plastic, breakaway design\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSafety release:\u003c\/strong\u003e Approx. 150 N\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Continuously adjustable via slide buckle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard reference:\u003c\/strong\u003e EN 397\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich helmets is the chin strap intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for safety helmets with a compatible 2-point attachment at the helmet rim, particularly industrial safety helmets in accordance with EN 397.\u003c\/p\u003e\n\u003ch3\u003eHow is the chin strap adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe length is adjusted using the slide buckle. The strap should fit securely without pressing against the chin.\u003c\/p\u003e\n\u003ch3\u003eAt what load does the buckle open?\u003c\/h3\u003e\n\u003cp\u003eThe safety release is approximately 150 N.\u003c\/p\u003e\n\u003ch3\u003eWhat should be done after it releases?\u003c\/h3\u003e\n\u003cp\u003eAfter release, the chin strap should be replaced before the next use.\u003c\/p\u003e","brand":"Reis","offers":[{"title":"Default Title","offer_id":65819470168413,"sku":"169","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/kinnriemenjpg-11940415.jpg?v=1788693066"},{"product_id":"bauhelm-gesichts-und-gehoerschutz","title":"Climax forestry helmet with visor and ear defenders","description":"\u003cp\u003eThe Climax safety helmet combines head protection according to EN 397 with a transparent hinged visor and ear defenders. The 6-point suspension and rotary closure allow adjustment for head circumferences from 53 to 61 cm.\u003c\/p\u003e\n\u003ch2\u003eHead, face and hearing protection\u003c\/h2\u003e\n\u003cp\u003eThe helmet is equipped with a transparent hinged visor and ear defenders with ear cushions. The ear defenders are specified with an SNR value of 27 dB and according to EN 352-3.\u003c\/p\u003e\n\u003ch2\u003eFit and colours\u003c\/h2\u003e\n\u003cp\u003eThe 6-point suspension supports adjustment inside the helmet. The rotary closure can be adjusted within the specified range. The helmet is available in yellow, blue, white and orange; the front provides an area for company logos.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHelmet protection:\u003c\/strong\u003e EN 397\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar defenders:\u003c\/strong\u003e EN 352-3\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEar defender rating:\u003c\/strong\u003e SNR 27 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVisor:\u003c\/strong\u003e Transparent, hinged\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e 6-point\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead circumference:\u003c\/strong\u003e 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Yellow, blue, white, orange\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Spain, EU\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat equipment does the helmet combine?\u003c\/h3\u003e\n\u003cp\u003eThe helmet combines head protection according to EN 397, a transparent hinged visor and ear defenders according to EN 352-3.\u003c\/p\u003e\n\u003ch3\u003eWhat head circumference is the helmet suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe rotary closure can be adjusted for head circumferences from 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eWhat is the SNR rating of the ear defenders?\u003c\/h3\u003e\n\u003cp\u003eThe specified SNR rating is 27 dB.\u003c\/p\u003e\n\u003ch3\u003eCan the visor be raised?\u003c\/h3\u003e\n\u003cp\u003eYes. The transparent visor is hinged and can be raised.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"yellow","offer_id":65819744272733,"sku":"1265-g","price":37.49,"currency_code":"EUR","in_stock":false},{"title":"white","offer_id":65819744305501,"sku":"1265-w","price":37.49,"currency_code":"EUR","in_stock":true},{"title":"orange","offer_id":65819744338269,"sku":"1265-o","price":37.49,"currency_code":"EUR","in_stock":false},{"title":"blue","offer_id":65819734704477,"sku":"1265-b","price":37.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941883.jpg?v=1788693662"},{"product_id":"bauhelm-en-397-gesichtsschutz","title":"Climax construction helmet with hinged visor","description":"\u003cp\u003eThe Climax construction helmet provides head protection according to EN 397 and a transparent hinged visor. The 6-point suspension and rotary closure support adjustment for head circumferences from 53 to 61 cm.\u003c\/p\u003e\n\u003ch2\u003eVisor and head protection\u003c\/h2\u003e\n\u003cp\u003eThe transparent visor can be raised and supplements head protection when working with chips, sawdust or particles. The helmet is specified according to EN 397.\u003c\/p\u003e\n\u003ch2\u003eFit and features\u003c\/h2\u003e\n\u003cp\u003eThe 6-point suspension supports pressure distribution. The rotary closure enables stepless adjustment within the specified head circumference. The smooth front surface is intended for company logos.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 397\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFace protection:\u003c\/strong\u003e Transparent, hinged visor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuspension:\u003c\/strong\u003e 6-point\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSize adjustment:\u003c\/strong\u003e Rotary closure, 53–61 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Yellow, orange, white, blue\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Spain, EU\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich standard is specified for the helmet?\u003c\/h3\u003e\n\u003cp\u003eThe standard specified for the safety helmet is EN 397.\u003c\/p\u003e\n\u003ch3\u003eWhat head circumference can the helmet be adjusted for?\u003c\/h3\u003e\n\u003cp\u003eThe rotary closure can be adjusted for head circumferences from 53 to 61 cm.\u003c\/p\u003e\n\u003ch3\u003eCan the visor be raised?\u003c\/h3\u003e\n\u003cp\u003eYes. The transparent visor is hinged and can be raised.\u003c\/p\u003e\n\u003ch3\u003eWhich colours are specified?\u003c\/h3\u003e\n\u003cp\u003eThe helmet is specified in yellow, orange, white and blue.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"yellow","offer_id":65819740012893,"sku":"1266-g","price":23.99,"currency_code":"EUR","in_stock":false},{"title":"orange","offer_id":65819740045661,"sku":"1266-o","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"white","offer_id":65819740078429,"sku":"1266-w","price":23.99,"currency_code":"EUR","in_stock":false},{"title":"blue","offer_id":65819734802781,"sku":"1266-b","price":23.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11941888.jpg?v=1788693693"},{"product_id":"schweisshelm-hochklappbar-brillentraeger-geeignet","title":"Climax flip-up welding helmet for spectacle wearers","description":"\u003cp\u003eThe flip-up Climax welding helmet allows users to switch between welding and visual inspection. The adjustable headgear provides room for prescription spectacles. For use, the filter shade and marking must match the process and current strength.\u003c\/p\u003e\n\u003ch2\u003eFlip-up visor\u003c\/h2\u003e\n\u003cp\u003eThe visor can be raised to inspect the workpiece without removing the helmet. It may only be raised when there is no hazardous welding radiation or other hazard.\u003c\/p\u003e\n\u003ch2\u003eFor prescription spectacles\u003c\/h2\u003e\n\u003cp\u003eThere is room for prescription spectacles beneath the visor. The headgear can be adjusted.\u003c\/p\u003e\n\u003ch2\u003eStandard information and replacement lens\u003c\/h2\u003e\n\u003cp\u003eEN 169 and EN 175 are specified for the helmet. A compatible 110 × 55 mm replacement lens is available separately.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Climax\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Flip-up welding helmet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e EN 169, EN 175\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFit:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpectacle compatibility:\u003c\/strong\u003e Suitable for prescription spectacles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtection areas:\u003c\/strong\u003e Eyes and face during welding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReplacement lens:\u003c\/strong\u003e 110 × 55 mm, available separately\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColours:\u003c\/strong\u003e Black, dark grey, grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the helmet be worn with prescription spectacles?\u003c\/h3\u003e\n\u003cp\u003eYes. There is room for prescription spectacles beneath the visor.\u003c\/p\u003e\n\u003ch3\u003eWhat does flip-up mean?\u003c\/h3\u003e\n\u003cp\u003eThe visor can be raised without removing the helmet. This is only permitted when there is no hazardous welding radiation or other hazard.\u003c\/p\u003e\n\u003ch3\u003eWhich standards are specified for the helmet?\u003c\/h3\u003e\n\u003cp\u003eEN 169 for welding filter lenses and EN 175 for eye and face protection during welding and related processes are specified for the helmet.\u003c\/p\u003e\n\u003ch3\u003eIs a replacement lens available?\u003c\/h3\u003e\n\u003cp\u003eYes. A compatible replacement lens measuring 110 × 55 mm is available separately.\u003c\/p\u003e\n\u003ch3\u003eWhich colours is the helmet available in?\u003c\/h3\u003e\n\u003cp\u003eThe helmet is specified in black, dark grey and grey.\u003c\/p\u003e","brand":"Climax","offers":[{"title":"Default Title","offer_id":65834846617949,"sku":"326","price":9.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/unbekannt-11940395.jpg?v=1788722667"},{"product_id":"anstosskappe-schwarz-innenverstaerkter-vollschutz","title":"Black bump cap with internal reinforcement, 62–70 cm","description":"\u003cp\u003eThe black bump cap has an internally reinforced construction, side ventilation openings and a hook-and-loop fastening. It can be adjusted for a head circumference of 62 to 70 cm and is intended for impacts against solid objects.\u003c\/p\u003e\n\u003ch2\u003eBump protection against solid obstacles\u003c\/h2\u003e\n\u003cp\u003eThe cap is intended for impacts against solid or hard objects such as edges, pipes or machine parts. It does not replace an industrial safety helmet where protection against falling objects is required.\u003c\/p\u003e\n\u003ch2\u003eAdjustment and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe hook-and-loop fastening allows adjustment within the range of 62 to 70 cm. The cotton outer material and side openings complement the equipment.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Bump cap\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 812\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOuter material:\u003c\/strong\u003e Cotton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInner shell:\u003c\/strong\u003e Reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHead circumference:\u003c\/strong\u003e 62–70 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFastening:\u003c\/strong\u003e Hook-and-loop fastening\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Side openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the bump cap replace a safety helmet?\u003c\/h3\u003e\n\u003cp\u003eNo. It is intended for impacts against solid objects. A suitable safety helmet is required where there is a risk from falling objects.\u003c\/p\u003e\n\u003ch3\u003eWhat head circumference is the cap suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe hook-and-loop fastening allows adjustment for a head circumference of 62 to 70 cm.\u003c\/p\u003e\n\u003ch3\u003eWhere can the bump cap be used?\u003c\/h3\u003e\n\u003cp\u003eTypical areas include warehouses, workshops, logistics, maintenance and production environments with fixed impact hazards.\u003c\/p\u003e\n\u003ch3\u003eHow is the cap adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe width is adjusted at the back of the head using the hook-and-loop fastening.\u003c\/p\u003e","brand":"NEO Tools","offers":[{"title":"Default Title","offer_id":65834973823325,"sku":"1698","price":7.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/files\/anstokappe-schwarzjpg-11968286.jpg?v=1788723391"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1068\/5520\/3165\/collections\/terrain-bereich-baustelle-helm.jpg?v=1789138849","url":"https:\/\/brixoro.eu\/en-ch\/collections\/safety-helmets-and-bump-caps.oembed","provider":"Brixoro","version":"1.0","type":"link"}